The 60-66 "PAYING IT FORWARD" thread!

[LDO]

Interested in the bed braces but it would require shipping.

[The_Hub]

I've go two parking lamp buckets for a 62-66. Good shape. lenses are melted out. $10 for shipping and they're yours! It's an extra set I don't need.

[aggie91]

Originally Posted by aggie91

Wayno - Are the motor mounts/stands still available? Are they for a 6cyl? If they fit in a USPS Medium Flat rate box, I would be interested in getting them for the cost of shipping. My even consider the hood hinges if both can fit into a Large Flat Rate box.

Karl

Originally Posted by wayno

motor mounts
chrome bed strips for short bed stepside
hood hinges and springs
speedo labels and gas pedal (both new in bags)
emergency brake cables - both in very good shape.

Wayno - Have you had any chance to look into the motor mounts/stands and the hood hinges?

Thanks!

[Frank63]

I have an in-cab gas tank out of a 64 complete with sender. I am not sure if the sender is any good, but the tank looks pretty clean.

Local pick up

[Figuarus]

Im interested in the filler neck. Would you separate them?

[Frank63]

Originally Posted by Figuarus

Im interested in the filler neck. Would you separate them?

I can separate the filler neck and cap. Do you need the plastic part that comes through the cab or the metal part bolted to the tank?
Posted via Mobile Device

[PSU1965]

Edit by Forum Staff
This thread is for members who are generously willing to donate parts. NOT for someone asking for free parts.
If you'd like to post a "want-to-buy" thread, just become a supporting member and post in the parts for sale section.

[PSU1965]

Probably would have gotten the point WITHOUT the caps but thanks for setting me straight.

[LostMy65]

I was going to rebuild it, and then decided to just buy a new 1406 (e-choke)
I remember now I got it local off CL. It didn't work very well, so I just bought new.
So, I might throw it back in the drawer.
I wouldn't feel comfortable selling it if it was junk.
If someone local wants it, it's free for local pick up.

[wayno]

Originally Posted by aggie91

Wayno - Have you had any chance to look into the motor mounts/stands and the hood hinges?

Thanks!

Hood hings are gone and I don't know whether those are 6 or 8 cyclinder motor mounts - you are welcome to them - pm me with an address and I'll try to ship them saturday morning.

[1966burb]

1 1/2 inch REAR Lowering blocks off of 1966 C10 Suburban. Will fit C10 pickup with rear coil suspension also. FREE Call or text Jim 360-410-0103

[1966burb]

Lowering blocks are spoken for. J

[sampsmit000]

Originally Posted by LostMy65

I was going to rebuild it, and then decided to just buy a new 1406 (e-choke)
I remember now I got it local off CL. It didn't work very well, so I just bought new.
So, I might throw it back in the drawer.
I wouldn't feel comfortable selling it if it was junk.
If someone local wants it, it's free for local pick up.

Would you ship it to 84043?

[Eric15chevys]

I have both lower firewall/footwell and the area under the seat. They came from a wrecked 61 and are in very good shape. I am in central North Carolina near 95 if anyone wants to pick them up. Otherwise PM me.

[LostMy65]

Originally Posted by LostMy65

I was going to rebuild it, and then decided to just buy a new 1406 (e-choke)
I remember now I got it local off CL. It didn't work very well, so I just bought new.
So, I might throw it back in the drawer.
I wouldn't feel comfortable selling it if it was junk.
If someone local wants it, it's free for local pick up.

This is gone.

[sharkskinman]

I'm in New Orleans...WOO Mardi Gras!!
Off 65 short
I've got
- 3 6 lug wheels (keeping one for spare) have 235s n 31s
- 2 hood blinkers w/lenses I think and 1 chrome bit
- Really good condition grill (white pearlescent-small dent barely noticeable)
got it for free giving it for free.. Doesn't fit look of my truck at all ��
- 67- repair manual in ok condition


Small bits can be shipped for cost
Grill would rather not
All I can think of at the moment on Chevy truck parts

Let me know if there's Anything Free in/around my area!!

!!Fantastic Thread!!

[Mikes66ChevyC10]

I posted these in the "NorthEast" section here on the forum a while ago but I thought I'd try posting them here since I used them on my 66 C10.

I have a homemade cab lift and cab dolly FREE to a good home if anybody needs them? I'm done using them and really don't have room for them. Thought somebody could use them before I take them apart and scrap them. Must pick up. Hate to see them go to waste.

[rickoner]

Originally Posted by sharkskinman

I'm in New Orleans...WOO Mardi Gras!!
Off 65 short
I've got
- 3 6 lug wheels (keeping one for spare) have 235s n 31s
- 2 hood blinkers w/lenses I think and 1 chrome bit
- Really good condition grill (white pearlescent-small dent barely noticeable)
got it for free giving it for free.. Doesn't fit look of my truck at all ��
- 67- repair manual in ok condition


Small bits can be shipped for cost
Grill would rather not
All I can think of at the moment on Chevy truck parts

Let me know if there's Anything Free in/around my area!!

!!Fantastic Thread!!

If you decide to ship the grill, I'd take it.

[sampsmit000]

2nd in line for the grill if you decide to ship!

[Grizz1963]

Originally Posted by Mikes66ChevyC10

I posted these in the "NorthEast" section here on the forum a while ago but I thought I'd try posting them here since I used them on my 66 C10.

I have a homemade cab lift and cab dolly FREE to a good home if anybody needs them? I'm done using them and really don't have room for them. Thought somebody could use them before I take them apart and scrap them. Must pick up. Hate to see them go to waste.

I built one of those Cab Lifts before, they are awesome tools.

Look here at how a small lady, with a baby on the hip, one handedly lifts off a cab.

https://m.youtube.com/watch?v=vfTC9wyQKK0


Less than sixty seconds......

https://m.youtube.com/watch?v=LxcuePYK-8Q


And the Dolly will be brilliant too.

I do hope someone sees it and needs it.

[60chevyjim]

Originally Posted by Mikes66ChevyC10

I posted these in the "NorthEast" section here on the forum a while ago but I thought I'd try posting them here since I used them on my 66 C10.

I have a homemade cab lift and cab dolly FREE to a good home if anybody needs them? I'm done using them and really don't have room for them. Thought somebody could use them before I take them apart and scrap them. Must pick up. Hate to see them go to waste.

hi mike wish I was closer to you so I could pick them up.
but im in nc.
if you do take them apart to scrap them .
I would pay the shipping to get the set of 4 casters .
thanks jim

[Crazy Rusty]

I see someone else is already trying to give away an in cab tank but I'll offer mine as well anyhow. Free for local pickup in Western Washington from a 65 C10. Looks solid, no rust. Not even any smells until I disconnected it. Straps and mounts (if I can get them out) included.

[aggie91]

I got the mounts Wayno, Thanks!

[Figuarus]

Crazy, PM Sent

[sofilofi]

Originally Posted by 1966burb

1 1/2 inch REAR Lowering blocks off of 1966 C10 Suburban. Will fit C10 pickup with rear coil suspension also. FREE Call or text Jim 360-410-0103

Got the blocks Jim,thank you.