What did you do to your truck today part III - Page 91 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

64shortbed · 04-25-2016, 10:10 AM

Pics of my seat. well that didnt work.

forestb · 04-25-2016, 11:47 AM

The painter got the grill surround, grill and bed installed. Newest pics.

gabbin · 04-25-2016, 11:48 AM

My buddy helped me take the fuel door and filler tube off a 95 suburban and mount it on the back driver side were the previous owner bastardized it with a square hole, just big enough to get the cap on. We also pulled the back tailgate cross brace off and repaired where they had welded on a retainer to cover the wood. I'll get some better pics a bit later.

64shortbed · 04-25-2016, 12:14 PM

Try this again.

**The Rocknrod** · 04-25-2016, 12:21 PM

Nice seat. What type of seat?

64shortbed · 04-25-2016, 01:51 PM

Quote:

Originally Posted by The Rocknrod

Nice seat. What type of seat?

I got the cover from classic industries. I've been work on a guys 62 impala and had him buy it for me for payment for the work. Fit good. I didn't do to bad for my first time doing a cover. i didn't trim my filler close enough and that is the bulge on the drivers side top. But i'll get it better. I did find out the seat is not a 64 seat. had a tag on the frame on it that said May 19, 1961.

**DPowers** · 04-25-2016, 03:27 PM

Quote:

Originally Posted by 60chevyjim

Dwaye your truck looks great !!

Thanks,
Amazing what some soap and water will do.

OldChevy61 · 04-25-2016, 06:29 PM

Got most of one of my doors stripped.

Lugnutz65 · 04-25-2016, 06:33 PM

Quote:

Originally Posted by OldChevy61

Got most of one of my doors stripped.

That is not a small thing either! It's a lot of work.

OldChevy61 · 04-27-2016, 04:24 PM

For sure Lugnutz. I got the glass and vent window out of the passenger door. Getting ready to strip the drivers door now.

TJ's Chevy · 04-27-2016, 09:53 PM

Installed new KYB gas shocks on my 64. Man does it ride ALOT better. Also installed new grease seals and you gotta have chrome hub caps. lol!

**chevy2tom** · 04-29-2016, 04:58 PM

Installed my new to me step bumpe

r
&started recycling

Happy WTF...(Wire trash friday!)

**my04** · 04-30-2016, 08:46 AM

serviced rear diff., Eaton HO52, 4.57 gears...
Name: 0425161704b.jpg
Views: 619
Size: 39.5 KB

Name: 0425161704a.jpg
Views: 622
Size: 39.4 KB

Oz_ · 05-01-2016, 03:54 AM

Installed a quick fuel 450 carb. 283 is much happier moving down from the tired Holley 600.

Isaiah92260 · 05-01-2016, 12:29 PM

Quote:

Originally Posted by Lugnutz65

That is not a small thing either! It's a lot of work.

How did you strip the pint? Did you sand or chemical strip? Funny I was standing my doors yesterday because I'm gonna get resdy to paint them Krylon Champaign Nuevuoe to imitate the light fawn, while I was standing, I was thinking, this is going to take way too long.

OldChevy61 · 05-01-2016, 03:24 PM

Quote:

Originally Posted by Isaiah92260

How did you strip the pint? Did you sand or chemical strip? Funny I was standing my doors yesterday because I'm gonna get resdy to paint them Krylon Champaign Nuevuoe to imitate the light fawn, while I was standing, I was thinking, this is going to take way too long.

Not sure about lugnutz, but I used a paint and rust stripper in my drill for 95% of it. Sandblaster. For the tight spots.

OldChevy61 · 05-01-2016, 03:28 PM

Got my headers painted and installed and got the starter bolted on.

Lugnutz65 · 05-01-2016, 08:26 PM

Quote:

Originally Posted by Isaiah92260

How did you strip the pint? Did you sand or chemical strip? Funny I was standing my doors yesterday because I'm gonna get resdy to paint them Krylon Champaign Nuevuoe to imitate the light fawn, while I was standing, I was thinking, this is going to take way too long.

Quote:

Originally Posted by OldChevy61

Not sure about lugnutz, but I used a paint and rust stripper in my drill for 95% of it. Sandblaster. For the tight spots.

Flat areas strip best with a 4.5" grinder and a HF poly carbide disc. This fender outer surface took about 45 minutes. Wear a dust mask and always watch the direction of disc rotation when coming to an edge. Smaller areas need a tighter radius so I use a wire wheel on a drill for that. Inside the window channels is best done with media blasting if you can.
I do NOT use chemical strippers for fear that any residue will prevent primer from bonding to the metal. Besides that, chemical strippers are expensive, caustic, and messy.

oldies1938 · 05-01-2016, 09:04 PM

rims and tires are on....20" MOB STEEL WHEELS

TJ's Chevy · 05-02-2016, 05:13 PM

New radiator came in today!

**chevy2tom** · 05-02-2016, 06:55 PM

Adjusted the valves after break in. Hope to take it out for its(to me) maden voyage lol

steveb64 · 05-02-2016, 09:20 PM

Worked on installing new bearings in the Cad 500. The thrust went out due to a high pressure transmission problem, which caused issues with the cam bearings.

Sorry about the sideways photo's, not sure why some do this and others don't, they're oriented correctly when I upload.

TJ's Chevy · 05-04-2016, 10:30 PM

Got my new demon and slip yoke ordered from Summit this evening.

Gonna measure the drive shaft and go have it shortened.

vin63 · 05-04-2016, 11:11 PM

Got the rear window in tonight...I'll put in the chrome lock strip this weekend.

TJ's Chevy · 05-08-2016, 11:06 AM

New demon and slip yoke!

04-25-2016, 10:10 AM	#2251
64shortbed Registered User Join Date: Feb 2012 Location: Scott city, ks Posts: 301	Re: What did you do to your truck today part III Pics of my seat. well that didnt work. __________________ 1964

04-25-2016, 11:47 AM	#2252
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: What did you do to your truck today part III The painter got the grill surround, grill and bed installed. Newest pics. Attached Images

04-25-2016, 11:48 AM	#2253
gabbin Registered User Join Date: Feb 2009 Location: harrah,oklahoma Posts: 89	Re: What did you do to your truck today part III My buddy helped me take the fuel door and filler tube off a 95 suburban and mount it on the back driver side were the previous owner bastardized it with a square hole, just big enough to get the cap on. We also pulled the back tailgate cross brace off and repaired where they had welded on a retainer to cover the wood. I'll get some better pics a bit later. Attached Images

04-25-2016, 12:14 PM	#2254
64shortbed Registered User Join Date: Feb 2012 Location: Scott city, ks Posts: 301	Re: What did you do to your truck today part III Try this again. Attached Images __________________ 1964

04-25-2016, 12:21 PM	#2255
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: What did you do to your truck today part III Nice seat. What type of seat? __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-25-2016, 06:29 PM	#2258
OldChevy61 Registered User Join Date: Apr 2015 Location: NICHOLS SC Posts: 435	Re: What did you do to your truck today part III Got most of one of my doors stripped.

04-27-2016, 04:24 PM	#2260
OldChevy61 Registered User Join Date: Apr 2015 Location: NICHOLS SC Posts: 435	Re: What did you do to your truck today part III For sure Lugnutz. I got the glass and vent window out of the passenger door. Getting ready to strip the drivers door now.

04-27-2016, 09:53 PM	#2261
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today part III Installed new KYB gas shocks on my 64. Man does it ride ALOT better. Also installed new grease seals and you gotta have chrome hub caps. lol! Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

04-29-2016, 04:58 PM	#2262
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: What did you do to your truck today part III Installed my new to me step bumper &started recycling Happy WTF...(Wire trash friday!)

04-30-2016, 08:46 AM	#2263
my04 Senior Member Join Date: Feb 2016 Location: Muskegon, MI Posts: 342	Re: What did you do to your truck today part III serviced rear diff., Eaton HO52, 4.57 gears...

05-01-2016, 03:54 AM	#2264
Oz_ Registered User Join Date: Dec 2015 Location: Paso Robles, CA Posts: 3	Re: What did you do to your truck today part III Installed a quick fuel 450 carb. 283 is much happier moving down from the tired Holley 600. Attached Images

05-01-2016, 03:28 PM	#2267
OldChevy61 Registered User Join Date: Apr 2015 Location: NICHOLS SC Posts: 435	Re: What did you do to your truck today part III Got my headers painted and installed and got the starter bolted on. Last edited by OldChevy61; 05-05-2016 at 07:22 AM.

05-01-2016, 09:04 PM	#2269
oldies1938 Registered User Join Date: May 2013 Location: chino hills ca Posts: 91	Re: What did you do to your truck today part III rims and tires are on....20" MOB STEEL WHEELS Attached Images __________________ MY 66 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=667780

05-02-2016, 05:13 PM	#2270
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today part III New radiator came in today! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

05-02-2016, 06:55 PM	#2271
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: What did you do to your truck today part III Adjusted the valves after break in. Hope to take it out for its(to me) maden voyage lol



Register or Log In To remove these advertisements.

05-02-2016, 09:20 PM	#2272
steveb64 Registered User Join Date: Oct 2009 Location: Moline, IL Posts: 157	Re: What did you do to your truck today part III Worked on installing new bearings in the Cad 500. The thrust went out due to a high pressure transmission problem, which caused issues with the cam bearings. Sorry about the sideways photo's, not sure why some do this and others don't, they're oriented correctly when I upload. Attached Images

05-04-2016, 10:30 PM	#2273
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today part III Got my new demon and slip yoke ordered from Summit this evening. Gonna measure the drive shaft and go have it shortened. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

05-04-2016, 11:11 PM	#2274
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: What did you do to your truck today part III Got the rear window in tonight...I'll put in the chrome lock strip this weekend. __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

05-08-2016, 11:06 AM	#2275
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today part III New demon and slip yoke! Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

Register or Log In To remove these advertisements.