Project Vitamin C-10 - Page 94 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alan's Classic · 02-25-2010, 10:28 AM

Quote:

Originally Posted by jason65

Looks good Alan.

Thanks Jason

Quote:

Originally Posted by LinkbeltOE

Alan,
What radiator did you use and where did you get it from? Also how much?

Summit PN SUM-381328 $211.95

62gmc910 · 02-25-2010, 12:20 PM

looking good , on the brake fitting , it is for a trailer brake controler , if you look it says tekonsha on it so your right in taking it out,
The 45 degree flares should seal up ok as long as the nuts engage enough thread. and again some very nice workmanship!!!

Alan's Classic · 02-25-2010, 12:41 PM

Quote:

Originally Posted by 62gmc910

looking good , on the brake fitting , it is for a trailer brake controler , if you look it says tekonsha on it so your right in taking it out,
The 45 degree flares should seal up ok as long as the nuts engage enough thread. and again some very nice workmanship!!!

Thanks for the info and comments. That clears up the mistery.

Another intersting site for hardware and fasteners. Allensfateners.com I was searching for adel clamps and stumbled across the site. Looks promising.

Strodder · 02-25-2010, 12:57 PM

Man you did some crazy bends. Looks great.

Alan's Classic · 02-27-2010, 09:14 PM

Quote:

Originally Posted by Strodder

Man you did some crazy bends. Looks great.

I wish I could take credit for it. They are bought.

Getting ready to build the brakes in the rear.

The mod I did to the crossmember to make it work with 72 brake lines worked out perfect.

Shannon is bringing a bracket over tonight to mount the T on the rearend. Also talked to the Truck Shop and they will send out another front prop valve line to frame to replace the lumpy one.

my67chevytruck · 02-27-2010, 09:40 PM

Great mod on the rear, i did the same but didnt think about it until after it was painted
so i cut and bolted the bracket on. Looking good alan!

Alan's Classic · 02-28-2010, 10:25 AM

Quote:

Originally Posted by my67chevytruck

Great mod on the rear, i did the same but didnt think about it until after it was painted
so i cut and bolted the bracket on. Looking good alan!

Shannon brought the bracket over and it worked perfectly. Got the wheel cylinders in and the rear brake lines buttoned up.

protrash64 · 02-28-2010, 12:14 PM

Lookin' good Alan!!!! Gettin' closer every time I check in to see whats up. Keep it going; you're almost there.

Strodder · 02-28-2010, 03:46 PM

[QUOTE=Alan's Classic;3829679]I wish I could take credit for it. They are bought.

That's what I like about you Allan. Being honest.

If you try hard you can probably do it. But would it worth it?

jason65 · 02-28-2010, 04:03 PM

Looking good as usual Alan.

kizer · 03-01-2010, 02:15 PM

I haven't been around lately for one reason or another, but like usual Alan top notch work my friend.

I hope your not saving receipts for everything you buy because I bet it will scare you in the end.

4dranch · 03-01-2010, 11:55 PM

Alan,
very..very..nice. and real clean work on the lines.
Did you ever find that fitting you were hunting or decide on something else?

Alan's Classic · 03-02-2010, 12:49 AM

Quote:

Originally Posted by protrash64

Lookin' good Alan!!!! Gettin' closer every time I check in to see whats up. Keep it going; you're almost there.

Thanks, one thing at a time is progress.

Quote:

Originally Posted by Strodder

That's what I like about you Allan. Being honest.

If you try hard you can probably do it. But would it worth it?

Thanks, I have no reason to lie about my limitations. Yes, I will be better with practice. But right now the cost would be enormous if I tried to do all my brake lines right now.

Quote:

Originally Posted by jason65

Looking good as usual Alan.

Thanks Jason!!

Quote:

Originally Posted by kizer

I haven't been around lately for one reason or another, but like usual Alan top notch work my friend.

I hope your not saving receipts for everything you buy because I bet it will scare you in the end.

Glad to seee you around here again. I quit adding receipts last year. It was close to 10K not counting labor.

Quote:

Originally Posted by 4dranch

Alan,
very..very..nice. and real clean work on the lines.
Did you ever find that fitting you were hunting or decide on something else?

Thanks David, I went with a different fuel pump. That fixed the problem.

Shannon came over to supervise me on my 3rd attempt on the fuel line. Bending tubing is getting a little easier, but I've got a lot to learn. Practice, practice, practice.

Yours truely.

The line is done.

SCOTI · 03-02-2010, 02:19 AM

Nice progress. The rear lines look like a quality fit.... what manufacturer?

Alan's Classic · 03-02-2010, 03:46 PM

Quote:

Originally Posted by SCOTI

Nice progress. The rear lines look like a quality fit.... what manufacturer?

I ordered them from truckandcarshop.com. Each line comes tagged so you have a clue to where it goes.

Got my fuel tank from ??????? today. A couple issues that I PM'd him about. Overall pleased so far. A couple issues were my fault for assuming.

The correct wheel tubs came today.

Radiator saddles and upper clamps came in today.

MacAttack · 03-02-2010, 04:54 PM

Oh wow - that juice tank and coolant assembly are outrageous!

Not quite stock - eh, Alan?

Strodder · 03-02-2010, 05:34 PM

Yeah they look GREAT

ruffrida2005 · 03-02-2010, 07:52 PM

coming along nice Alan.

jsmithbm · 03-02-2010, 09:46 PM

[QUOTE=Alan's Classic;3816433]Thanks Joel. Any time I learn something that looks easy usually proves me wrong.

You gonna post any pics of your progress?

Okay Alan, go see em! i even painted a part

Alan's Classic · 03-02-2010, 11:22 PM

Quote:

Originally Posted by MacAttack

Oh wow - that juice tank and coolant assembly are outrageous!

Not quite stock - eh, Alan?

I think I crossed the stock line a little while ago.

Quote:

Originally Posted by Strodder

Yeah they look GREAT

Quote:

Originally Posted by ruffrida2005

coming along nice Alan.

Thanks Dennis and Paul

Quote:

Originally Posted by jsmithbm

Okay Alan, go see em! i even painted a part

I'll go check them out.

The wheel tubs seam to fit pretty good. No complaints.

I don't have much room to play when I fab up the fan shroud.

daverod · 03-02-2010, 11:47 PM

Your getting close to taking that thing for a drive.

Looks good.

ruffrida2005 · 03-03-2010, 12:11 AM

You going to leave those high speed fan straps?

198plus · 03-03-2010, 12:39 AM

Those are sweet..........

Quote:

Originally Posted by ruffrida2005

You going to leave those high speed fan straps?

198plus · 03-03-2010, 12:40 AM

Great job on everything as usual Alan

MacAttack · 03-03-2010, 11:31 AM

The tubs look sweet - and the power steering plumbing is primo!

This build's got to be made into an illustrated catalog - I'd pay $50 for it in a heart-beat. Best work I've ever seen, or even heard about.

Mac.

02-25-2010, 12:20 PM	#2327
62gmc910 Registered User Join Date: Nov 2009 Location: Cremona AB Canada Posts: 370	Re: Project Vitamin C-10 looking good , on the brake fitting , it is for a trailer brake controler , if you look it says tekonsha on it so your right in taking it out, The 45 degree flares should seal up ok as long as the nuts engage enough thread. and again some very nice workmanship!!! __________________ 62 GMC 910 short fleetside 454 super t10 14 bolt w/gov lock 70s c20 front discs (built in the 80s) 65 GMC 930 dualwheel 292 4spd all origonal 39k mi(my sons truck) 63 GMC 950 camperized school bus, (Gus the bus) 350 4speed 2 speed rear 64 GMC 950 "spare" bus 283? 4speed detroit locker 53 GMC 1ton dual wheel bus 78 GMC c25 short course off road race truck(son's truck) 355 th400 14 bolt (www.wheel2wheel.ca) 88 Peterbilt 379 longhood (hauls race truck)

02-25-2010, 12:57 PM	#2329
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Project Vitamin C-10 Man you did some crazy bends. Looks great. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

02-27-2010, 09:40 PM	#2331
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project Vitamin C-10 Great mod on the rear, i did the same but didnt think about it until after it was painted so i cut and bolted the bracket on. Looking good alan! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

02-28-2010, 12:14 PM	#2333
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Project Vitamin C-10 Lookin' good Alan!!!! Gettin' closer every time I check in to see whats up. Keep it going; you're almost there. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-28-2010, 03:46 PM	#2334
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Project Vitamin C-10 [QUOTE=Alan's Classic;3829679]I wish I could take credit for it. They are bought. That's what I like about you Allan. Being honest. If you try hard you can probably do it. But would it worth it? __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

02-28-2010, 04:03 PM	#2335
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: Project Vitamin C-10 Looking good as usual Alan.

03-01-2010, 02:15 PM	#2336
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: Project Vitamin C-10 I haven't been around lately for one reason or another, but like usual Alan top notch work my friend. I hope your not saving receipts for everything you buy because I bet it will scare you in the end. __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary

03-01-2010, 11:55 PM	#2337
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Project Vitamin C-10 Alan, very..very..nice. and real clean work on the lines. Did you ever find that fitting you were hunting or decide on something else? __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

03-02-2010, 02:19 AM	#2339
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	Re: Project Vitamin C-10 Nice progress. The rear lines look like a quality fit.... what manufacturer? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-02-2010, 04:54 PM	#2341
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Project Vitamin C-10 Oh wow - that juice tank and coolant assembly are outrageous! Not quite stock - eh, Alan? __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

03-02-2010, 05:34 PM	#2342
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Project Vitamin C-10 Yeah they look GREAT __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

03-02-2010, 07:52 PM	#2343
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Project Vitamin C-10 coming along nice Alan. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

03-02-2010, 09:46 PM	#2344
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: Project Vitamin C-10 [QUOTE=Alan's Classic;3816433]Thanks Joel. Any time I learn something that looks easy usually proves me wrong. You gonna post any pics of your progress? Okay Alan, go see em! i even painted a part __________________ Learning as I go! -------------------------------------

03-02-2010, 11:47 PM	#2346
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Project Vitamin C-10 Your getting close to taking that thing for a drive. Looks good. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

03-03-2010, 12:11 AM	#2347
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Project Vitamin C-10 You going to leave those high speed fan straps? __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759



Register or Log In To remove these advertisements.

03-03-2010, 12:40 AM	#2349
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: Project Vitamin C-10 Great job on everything as usual Alan __________________ My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl

03-03-2010, 11:31 AM	#2350
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Project Vitamin C-10 The tubs look sweet - and the power steering plumbing is primo! This build's got to be made into an illustrated catalog - I'd pay $50 for it in a heart-beat. Best work I've ever seen, or even heard about. Mac. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

Register or Log In To remove these advertisements.