How about some pics of bagged C-10's - Page 96 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lowdownstar · 11-25-2012, 08:41 AM

i like it! cool truck

Ray

Jimbabwe · 11-25-2012, 10:30 AM

Very cool.

augiep9 · 11-25-2012, 02:33 PM

Does anyone have pictures and tips for a homemade four ink setup for these trucks?

Dinos63 · 11-25-2012, 09:18 PM

step side is cool!

cubber · 11-25-2012, 10:54 PM

More progress, I guess it's officially "bagged", but I got a lot more to do!

Mad Rods · 11-25-2012, 11:09 PM

Tore mine down for Re-Build but here is the rolling chassis.

Posted via Mobile Device

hdirtbiker94 · 12-01-2012, 01:17 AM

`aqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

Jimbabwe · 12-01-2012, 02:56 AM

Whatcha' doin' different Mad Rods?

Mad Rods · 12-01-2012, 12:39 PM

Quote:

Originally Posted by Jimbabwe

Whatcha' doin' different Mad Rods?

PB 1"Narrowed Tubular Arms, PB Trailing arm Xmember. Currently working on repainting motor and trans and working on Cab. Gonna replace the rockers and weld up some holes as well as figure out what I'm going to do as far as trans cover.
Posted via Mobile Device

stevencvn72 · 12-07-2012, 11:47 AM

Just finished up. If it were nicer in the Northwest, I'd get better pictures. Here's a list of the works since it's always nice to know what folks are riding on. There really isn't as much of a rake as it looks in the picture.

'72 Disk Brake transplant with McGaughys drop spindles,
2500 & 2600 airlift bags
5 gal air lift tank
VU-4 Manifold with 3/8" lines
Single Viair 444 Compressor
CPP C-Notch with 1.5" blocks
7 Switch Controler
15X7s with 215-70-15 Firestones set on the fender wells the same time the crossmember sits on the deck.

cubber · 12-07-2012, 03:48 PM

I really like it, nothin like a good stepper
Posted via Mobile Device

broey · 12-07-2012, 07:41 PM

supremes look good too!

Desert.Chevy · 12-18-2012, 05:48 PM

96 pages of Awesome trucks!!

Lets see some more pictures everyone.
Posted via Mobile Device

Rochlow · 12-18-2012, 06:08 PM

Quote:

Originally Posted by stevencvn72

Just finished up. If it were nicer in the Northwest, I'd get better pictures. Here's a list of the works since it's always nice to know what folks are riding on. There really isn't as much of a rake as it looks in the picture.

'72 Disk Brake transplant with McGaughys drop spindles,
2500 & 2600 airlift bags
5 gal air lift tank
VU-4 Manifold with 3/8" lines
Single Viair 444 Compressor
CPP C-Notch with 1.5" blocks
7 Switch Controler
15X7s with 215-70-15 Firestones set on the fender wells the same time the crossmember sits on the deck.

Im really digging the supremes and skinny white walls..

stevencvn72 · 12-18-2012, 09:27 PM

Quote:

Originally Posted by Rochlow

Im really digging the supremes and skinny white walls..

Thanks! I always liked how the skinny whites gave the illusion of a bigger wheel without the "modern" look of big wheels.
Posted via Mobile Device

Rochlow · 12-18-2012, 11:48 PM

Do you have any more pictures of the truck? Did you have to use spacers in the rear to bring the rear wheels out?
Posted via Mobile Device

stevencvn72 · 12-19-2012, 11:19 AM

Quote:

Originally Posted by Rochlow

Do you have any more pictures of the truck? Did you have to use spacers in the rear to bring the rear wheels out?
Posted via Mobile Device

Nah, the wheels have a 3 1/2" back space which brings them out a bit and the truck has a '72 rear end which is a little wider than the '67s. All the pics I have since I bagged it are in the garage and aren't the best. Here's another since you were interested in the the spacing in the rear.

Rochlow · 12-19-2012, 11:48 AM

Ok.. That makes sense in the rear. Truck looks great!

PBFAB.COM · 12-20-2012, 04:44 PM

4WD K5 blazer conversion running Porterbuilt Dropmember system up front and 4-link built by Air Ride Equipment out back.

PBFAB.COM · 12-20-2012, 04:45 PM

Another cool Porterbuilt Equipped C10... Dropmembers front and rear.

ibanezer · 12-21-2012, 10:05 AM

That blazer is so awesome just the way it is.

cubber · 12-21-2012, 10:15 AM

Quote:

Originally Posted by ibanezer

That blazer is so awesome just the way it is.

Just as I'm getting close to the end of my project, now I want a blazer, lol.
Posted via Mobile Device

mygmctruck · 12-21-2012, 10:45 AM

Tell me how on earth do you drive these trucks when they are so low to the ground ?
I can only vision hitting every high spot in the rd .

JNJchev77 · 12-21-2012, 10:58 AM

Quote:

Originally Posted by mygmctruck

Tell me how on earth do you drive these trucks when they are so low to the ground ?
I can only vision hitting every high spot in the rd .

They have air suspension that is fully adjustable to accommodate different road conditions.

PBFAB.COM · 12-21-2012, 11:07 AM

Quote:

Originally Posted by mygmctruck

Tell me how on earth do you drive these trucks when they are so low to the ground ?
I can only vision hitting every high spot in the rd .

You wouldn't be able to drive them at the height shown, but as mentioned, they have adjustable air suspension systems that allow the vehicle to raise for adequate ground clearance.

11-25-2012, 08:41 AM	#2376
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 824	Re: How about some pics of bagged C-10's i like it! cool truck Ray

11-25-2012, 10:30 AM	#2377
Jimbabwe Registered User Join Date: Dec 2011 Location: New York City Posts: 648	Re: How about some pics of bagged C-10's Very cool.

11-25-2012, 02:33 PM	#2378
augiep9 Registered User Join Date: Feb 2012 Location: Basehor, KS. Kansas City, KS Posts: 61	Re: How about some pics of bagged C-10's Does anyone have pictures and tips for a homemade four ink setup for these trucks?

11-25-2012, 09:18 PM	#2379
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: How about some pics of bagged C-10's step side is cool! __________________ CHEVY ONLY... Nothin Else !

11-25-2012, 10:54 PM	#2380
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: How about some pics of bagged C-10's More progress, I guess it's officially "bagged", but I got a lot more to do! Attached Images __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver!

11-25-2012, 11:09 PM	#2381
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: How about some pics of bagged C-10's Tore mine down for Re-Build but here is the rolling chassis. Posted via Mobile Device __________________ Chevy Only Tx.........

12-01-2012, 01:17 AM	#2382
hdirtbiker94 Registered User Join Date: Nov 2010 Location: Bellingham, Washington Posts: 20	Re: How about some pics of bagged C-10's `aqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

12-01-2012, 02:56 AM	#2383
Jimbabwe Registered User Join Date: Dec 2011 Location: New York City Posts: 648	Re: How about some pics of bagged C-10's Whatcha' doin' different Mad Rods?

12-07-2012, 11:47 AM	#2385
stevencvn72 Kill Bill...et Join Date: Aug 2008 Location: Winchestertonfieldville, Wa Posts: 366	Re: How about some pics of bagged C-10's Just finished up. If it were nicer in the Northwest, I'd get better pictures. Here's a list of the works since it's always nice to know what folks are riding on. There really isn't as much of a rake as it looks in the picture. '72 Disk Brake transplant with McGaughys drop spindles, 2500 & 2600 airlift bags 5 gal air lift tank VU-4 Manifold with 3/8" lines Single Viair 444 Compressor CPP C-Notch with 1.5" blocks 7 Switch Controler 15X7s with 215-70-15 Firestones set on the fender wells the same time the crossmember sits on the deck. __________________ -Steve I ♥ Grease '67 Chev stepper http://youtu.be/38p_2Iu2fd0 Last edited by stevencvn72; 12-12-2012 at 11:50 PM.

12-07-2012, 03:48 PM	#2386
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: How about some pics of bagged C-10's I really like it, nothin like a good stepper Posted via Mobile Device __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver!

12-07-2012, 07:41 PM	#2387
broey Square Join Date: Feb 2011 Location: Phoenix Arizona Posts: 1,568	Re: How about some pics of bagged C-10's supremes look good too! __________________ Squarebody Syndicate

12-18-2012, 05:48 PM	#2388
Desert.Chevy Registered User Join Date: Nov 2012 Location: Earth Posts: 339	Re: How about some pics of bagged C-10's 96 pages of Awesome trucks!! Lets see some more pictures everyone. Posted via Mobile Device

12-18-2012, 11:48 PM	#2391
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: How about some pics of bagged C-10's Do you have any more pictures of the truck? Did you have to use spacers in the rear to bring the rear wheels out? Posted via Mobile Device

12-19-2012, 11:48 AM	#2393
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: How about some pics of bagged C-10's Ok.. That makes sense in the rear. Truck looks great!

12-20-2012, 04:44 PM	#2394
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: How about some pics of bagged C-10's 4WD K5 blazer conversion running Porterbuilt Dropmember system up front and 4-link built by Air Ride Equipment out back. Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!



Register or Log In To remove these advertisements.

12-20-2012, 04:45 PM	#2395
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: How about some pics of bagged C-10's Another cool Porterbuilt Equipped C10... Dropmembers front and rear. Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

12-21-2012, 10:05 AM	#2396
ibanezer Registered User Join Date: Aug 2011 Location: Louisville, Kentucky Posts: 94	Re: How about some pics of bagged C-10's That blazer is so awesome just the way it is. __________________ 1968 C20 LWB. Soon to be Dropmember'd.

12-21-2012, 10:45 AM	#2398
mygmctruck Registered User Join Date: Sep 2011 Location: Munising , mi Posts: 144	Re: How about some pics of bagged C-10's Tell me how on earth do you drive these trucks when they are so low to the ground ? I can only vision hitting every high spot in the rd .

Register or Log In To remove these advertisements.