The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Go Jack car dollies for sale (https://67-72chevytrucks.com/vboard/showthread.php?t=131922)

454_72_4X4 12-17-2004 04:49 AM

Go Jack car dollies for sale
 
Still cleanin shop...

This is 1 pair of Go Jack 6000lb car dollies. Ya just stick em under the wheels and jack them to raise the tire off the ground. (You guys know how they work).

Each one needs 1 caster wheel to be usable. The other 3 casters seem to be in working order. I bought them thinking someday I might get a new concrete floor in my shop but I can't see that far in the future right now. :whine: I've never used them myself but after you replace the two casters I cant see why they wouldn't work. The jack part works fine on both, but one does have part of the handle broke off. Still works though.

http://www.imagestation.com/picture/...5/f5e1dc8b.jpg

http://www.imagestation.com/picture/...e/f5e1dabd.jpg

Here's the bent casters, (1 bent caster on each dollie).
http://www.imagestation.com/picture/...3/f5e1d934.jpg

http://www.imagestation.com/picture/...e/f5e1d2c2.jpg

I've looked around on the net and can't find these cheaper than $350 a pair so I'd like to get $175 out of them, (considering the bent casters and broken handle).

Blue Beard 12-17-2004 08:30 AM

I use the flat ones, but you have to jack the wheels up to place them.

You're right replacing the casters and fixing the handle shouldn't be a problem.

Bamm 12-17-2004 09:28 AM

They are worth it guys. We had these when I was doing bodywork full time and they are great. I wonder though, if they will work on a lot of todays 18 & 20+ inch wheels?

454_72_4X4 12-17-2004 11:04 AM

Quote:

I wonder though, if they will work on a lot of todays 18 & 20+ inch wheels?
That's a good point. I've never thought about it until you mentioned it. Actually I'd think they would because the 18-20's still are around the same size outside diameter as some of the 15-16's aren't they? They are advertised to fit a tire up to 13 in. wide but I can't find anything about diameter.

If you're lookin up info on them, don't forget these are the 6000lbs, (1500lb per), not the 5000lbs.

Another FYI; They weigh almost 40 lbs. EA.

454_72_4X4 12-17-2004 11:06 AM

Just found this;

http://www.tooltopia.com/index.asp?P...OD&ProdID=9187

Says up to 35 in diameter tires.

Bamm 12-17-2004 12:05 PM

Are there 2 (1 pair) of go jacks or 4 (2 pair)?

454_72_4X4 12-17-2004 12:14 PM

2 (1 pair)

Should've put that in the original post, huh?LOL!
I'll edit it in there.

454_72_4X4 12-18-2004 11:44 AM

bump

454_72_4X4 12-19-2004 10:57 PM

Bump 2

Make a good X-mas present...

454_72_4X4 12-22-2004 04:24 PM

Bump 3...

Goin on Ebay in a few minutes..

454_72_4X4 12-22-2004 04:57 PM

http://cgi.ebay.com/ebaymotors/ws/eB...tem=4513931402

454_72_4X4 12-29-2004 03:56 AM

Less than 13 hours left...and the reserve has been met. Better hurry!

http://cgi.ebay.com/ebaymotors/ws/eB...e=STRK:MESE:IT


All times are GMT -4. The time now is 12:19 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com