Go Jack car dollies for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

454_72_4X4 · 12-17-2004, 04:49 AM

Still cleanin shop...

This is 1 pair of Go Jack 6000lb car dollies. Ya just stick em under the wheels and jack them to raise the tire off the ground. (You guys know how they work).

Each one needs 1 caster wheel to be usable. The other 3 casters seem to be in working order. I bought them thinking someday I might get a new concrete floor in my shop but I can't see that far in the future right now.

I've never used them myself but after you replace the two casters I cant see why they wouldn't work. The jack part works fine on both, but one does have part of the handle broke off. Still works though.

Here's the bent casters, (1 bent caster on each dollie).

I've looked around on the net and can't find these cheaper than $350 a pair so I'd like to get $175 out of them, (considering the bent casters and broken handle).

Blue Beard · 12-17-2004, 08:30 AM

I use the flat ones, but you have to jack the wheels up to place them.

You're right replacing the casters and fixing the handle shouldn't be a problem.

Bamm · 12-17-2004, 09:28 AM

They are worth it guys. We had these when I was doing bodywork full time and they are great. I wonder though, if they will work on a lot of todays 18 & 20+ inch wheels?

454_72_4X4 · 12-17-2004, 11:04 AM

Quote:

I wonder though, if they will work on a lot of todays 18 & 20+ inch wheels?

That's a good point. I've never thought about it until you mentioned it. Actually I'd think they would because the 18-20's still are around the same size outside diameter as some of the 15-16's aren't they? They are advertised to fit a tire up to 13 in. wide but I can't find anything about diameter.

If you're lookin up info on them, don't forget these are the 6000lbs, (1500lb per), not the 5000lbs.

Another FYI; They weigh almost 40 lbs. EA.

454_72_4X4 · 12-17-2004, 11:06 AM

Just found this;

http://www.tooltopia.com/index.asp?P...OD&ProdID=9187

Says up to 35 in diameter tires.

Bamm · 12-17-2004, 12:05 PM

Are there 2 (1 pair) of go jacks or 4 (2 pair)?

454_72_4X4 · 12-17-2004, 12:14 PM

2 (1 pair)

Should've put that in the original post, huh?LOL!
I'll edit it in there.

454_72_4X4 · 12-18-2004, 11:44 AM

bump

454_72_4X4 · 12-19-2004, 10:57 PM

Bump 2

Make a good X-mas present...

454_72_4X4 · 12-22-2004, 04:24 PM

Bump 3...

Goin on Ebay in a few minutes..

454_72_4X4 · 12-22-2004, 04:57 PM

http://cgi.ebay.com/ebaymotors/ws/eB...tem=4513931402

454_72_4X4 · 12-29-2004, 03:56 AM

Less than 13 hours left...and the reserve has been met. Better hurry!

http://cgi.ebay.com/ebaymotors/ws/eB...e=STRK:MESE:IT

12-17-2004, 04:49 AM	#1
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Go Jack car dollies for sale Still cleanin shop... This is 1 pair of Go Jack 6000lb car dollies. Ya just stick em under the wheels and jack them to raise the tire off the ground. (You guys know how they work). Each one needs 1 caster wheel to be usable. The other 3 casters seem to be in working order. I bought them thinking someday I might get a new concrete floor in my shop but I can't see that far in the future right now. I've never used them myself but after you replace the two casters I cant see why they wouldn't work. The jack part works fine on both, but one does have part of the handle broke off. Still works though. Here's the bent casters, (1 bent caster on each dollie). I've looked around on the net and can't find these cheaper than $350 a pair so I'd like to get $175 out of them, (considering the bent casters and broken handle). __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey Last edited by 454_72_4X4; 12-17-2004 at 12:16 PM.

12-17-2004, 08:30 AM	#2
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	I use the flat ones, but you have to jack the wheels up to place them. You're right replacing the casters and fixing the handle shouldn't be a problem. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

12-17-2004, 09:28 AM	#3
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	They are worth it guys. We had these when I was doing bodywork full time and they are great. I wonder though, if they will work on a lot of todays 18 & 20+ inch wheels? __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

12-17-2004, 11:06 AM	#5
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Just found this; http://www.tooltopia.com/index.asp?P...OD&ProdID=9187 Says up to 35 in diameter tires. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

12-17-2004, 12:05 PM	#6
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Are there 2 (1 pair) of go jacks or 4 (2 pair)? __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

12-17-2004, 12:14 PM	#7
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	2 (1 pair) Should've put that in the original post, huh?LOL! I'll edit it in there. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

12-18-2004, 11:44 AM	#8
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	bump __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

12-19-2004, 10:57 PM	#9
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Bump 2 Make a good X-mas present... __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

12-22-2004, 04:24 PM	#10
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Bump 3... Goin on Ebay in a few minutes.. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

12-22-2004, 04:57 PM	#11
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	http://cgi.ebay.com/ebaymotors/ws/eB...tem=4513931402 __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

12-29-2004, 03:56 AM	#12
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Less than 13 hours left...and the reserve has been met. Better hurry! http://cgi.ebay.com/ebaymotors/ws/eB...e=STRK:MESE:IT __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.