The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Need a drip rail ASAP...and some advice (https://67-72chevytrucks.com/vboard/showthread.php?t=551984)

Igorsgonemadd 11-15-2012 04:52 PM

Need a drip rail ASAP...and some advice
 
Ok so I pulled the drip rails off my truck for paint and in my hurry to get it to the body shop, I left the front drivers side on top of the truck when I pulled it off and it's gone now. So I need one badly What vendors sell them ! It's off an 87 crew cab, . Also a little confused about how to put them back on. When I got the little bolts out, which I had to do with needle nose pliers cause I couldn't get a socket in there, there was tape on the back side of it. Do I need to put something in between drip rail and the body or just bolt them up. Then should I run a bead of silicone around them to keep water out or do I need to use seam sealer. All help would be greatly appreciated. Thanks!
Posted via Mobile Device

bilfman 11-15-2012 07:23 PM

Re: Need a drip rail ASAP...and some advice
 
2 sided body tape works good to hold them down and seal the holes, if not some seam sealer around the holes. Stay away from silicone on anything exterior.


All times are GMT -4. The time now is 01:57 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com