Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-15-2012, 04:52 PM | #1 |
Registered User
Join Date: Sep 2011
Location: Coweta Oklahoma
Posts: 118
|
Need a drip rail ASAP...and some advice
Ok so I pulled the drip rails off my truck for paint and in my hurry to get it to the body shop, I left the front drivers side on top of the truck when I pulled it off and it's gone now. So I need one badly What vendors sell them ! It's off an 87 crew cab, . Also a little confused about how to put them back on. When I got the little bolts out, which I had to do with needle nose pliers cause I couldn't get a socket in there, there was tape on the back side of it. Do I need to put something in between drip rail and the body or just bolt them up. Then should I run a bead of silicone around them to keep water out or do I need to use seam sealer. All help would be greatly appreciated. Thanks!
Posted via Mobile Device Last edited by old Rusty C10; 11-16-2012 at 06:40 PM. |
11-15-2012, 07:23 PM | #2 |
Registered User
Join Date: Dec 2011
Location: Regina, SK, Canada
Posts: 622
|
Re: Need a drip rail ASAP...and some advice
2 sided body tape works good to hold them down and seal the holes, if not some seam sealer around the holes. Stay away from silicone on anything exterior.
__________________
1979 Chevy Dually Crew 4X4 454, D60 Tru-trac, D70 Detroit Locker, 3.73, 4L80E/NP205 1971 GMC 3/4 Ton 4X4 |
Bookmarks |
|
|