The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Stock Tachometer (https://67-72chevytrucks.com/vboard/showthread.php?t=766124)

Baker72chevy 06-22-2018 03:33 PM

Stock Tachometer
 
How can you check tachometer to see if it works are not

lutronjim 06-22-2018 09:44 PM

Re: Stock Tachometer
 
If its mechanical, a drill and a old wooden match stick should make it register. Make sure it turns clockwise looking at the back.

Baker72chevy 06-22-2018 09:47 PM

Re: Stock Tachometer
 
It a stock out of a 71 c10

custom10nut 06-23-2018 06:51 AM

Re: Stock Tachometer
 
Just to check to see if it works, you can use test wires. Hook it to the coil and battery then start the engine. This won't allow to check accuracy, but it'll tell you if if works.
When I say accuracy, I just replced my original factory tach, because of the eradic reading. It would read low at idle, but high a cruise speeds.
They can be fixed, but a new one can be had for less than $100. I went new


All times are GMT -4. The time now is 08:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com