Brake Lines Question: What's Diff betwn 3/4 and 1/2 Lines?
 

Hey Board,

I have a 3/4 ton C20 project (1969). I've swapped in disc brakes all around (72 c20 up front, 76 caddy eldo in rear). It's still an 8-lugger but by no means intended as a work truck.

I'm about to order all new brake lines in stainless. Aftermarket only really offers lines for C10 1/2 model -- or at least companies like LMC identify what they offer as for 1/2 ton use explicitly. I can't imagine why 1/2 ton lines won't work.

Am I missing something?

Thx
BDD:metal:

Re: Brake Lines Question: What's Diff betwn 3/4 and 1/2 Lines?
 

Not a thing.

Re: Brake Lines Question: What's Diff betwn 3/4 and 1/2 Lines?
 

Thanks!

Re: Brake Lines Question: What's Diff betwn 3/4 and 1/2 Lines?
 

If you are going FROM drum front and back to disk front and back you have a few more things to consider.
The bore size on your master, proportioning valve, and line diameter according to bore size on your master; unless you have bought a kit where someone has that all figured out?