Quote:
|
Originally Posted by dubie
would it be safe to use a 3M spray adhesive in about 4 spots and bond the gasket to the pan??
|
i suppose you can use that or something like aviation form-a-gasket by permatex to hold it in place
i think you'd have good luck by getting 4 21/2inch studs and putting them in 2foward corners and 2back corners thereby having the pan and gasket hanging then by tightening nuts on them get the pan close(1/4inch) of the block and getting the bolts started for the pan remove the studs and tighten up. once you have it hanging in place it's pretty easy if the gasket slips a bit you just use an awl or a rusty old nail to fish the bolt holes in the pan and gasket and block in line then slip the panbolts in