406 for sale - FRESH and STRONG - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ed455 · 07-25-2006, 10:47 PM

406

509 block (2 bolt main with ARP studs) with eagle 6" H-beams and eagle crank. Deck has plugs for strength but steam holes are open. Brass freeze plugs. Flat top Hypereutectic pistons which are very light, engine is INTERNALLY balanced. Static compression 10.5:1. Lunati hydraulic cam specs: http://www.holley.com/07104LUN.asp

Edelbrock Victor Jr. with a custom-built Holley 750 vac sec carb, Pro Topline 220 cc aluminum heads with stainless valves and crane aluminum roller rockers on head studs. Polished aluminum timing cover over Cloyes double roller. 8 quart oil pan. SFI flexplate. Weiand aluminum water pump. MSD Pro Billet distributor.

This motor has 400 miles on it and is nicely tuned. It does not overheat and can break the tires loose going into EVERY gear. I can smoke the tires from a stop and once it finally hooks up, it smokes the tires all over again when it shifts into second gear, then when it hooks up in second gear it does the same thing going into third.

That brings me to the tranny. 700R4 nicely built with good innards and 2500 stall convertor.

Motor ready to run: $3000

With tranny: $3600

meathead95 · 07-26-2006, 12:27 PM

why are you selling it?

Gary · 07-26-2006, 07:21 PM

Ya why sell it? And if I buy it you gonna bring it to me and swap it into my 85 for me?

If I purchase I'd want the trans too, love those 700r4's that's for sure. Truck's currently got a tired 305/3 speed auto that I'm dying to replace...

I'm not that far from you, I'm about a mile from the Huntsville, AL city limit sign

ed455 · 07-26-2006, 11:01 PM

Selling because my 427 sbc is finished, dynoed, and ready to install. The tranny's going because my latest dyno numbers on the 427 hit 538 hp and 500 lbs. of torque. This 700R4 is very good, but not good enough for THOSE numbers.

I have a hankering for a pair of Sea Doos, so trades for those considered.

Oh, and by the way, it's still in the truck so it can be test driven.

Gary · 07-26-2006, 11:49 PM

Hah too bad you're not in the market for a pontoon

got a pretty decent one I'm looking to sell for around $2200.

Anything that would be a real issue putting this into my 85? Wanna stay with SBC so I can keep the AC/etc without any major changes.

ed455 · 07-27-2006, 12:07 AM

What size pontoon?? What engine brand and size?

ed455 · 07-27-2006, 12:08 AM

Quote:

Originally Posted by Dixiesys

Anything that would be a real issue putting this into my 85? Wanna stay with SBC so I can keep the AC/etc without any major changes.

Bolt-in no problem.

Gary · 07-27-2006, 12:16 AM

It's just a 20 footer with a 40 or 50 hp outboard, nothing fancy but always got us on the water when we found time to go.

jpkerley · 07-27-2006, 10:14 AM

so ed you moved to hendersonville, that's funny, thats where my parents have his boat and lives3-4 days a week. They are at creekwood marina. Since i last talked to you i ran across a swee deal on a fast burn 385, so im not as heavily in the market for a 406 but if you still have it next time im up there i will come by and take a look.

ed455 · 07-27-2006, 02:41 PM

Ok. But this 406 will run circles around a fast burn 385.

ed455 · 07-29-2006, 11:44 PM

ttt

Gary · 07-29-2006, 11:51 PM

Weather and life kept me from getting fresh pics of that pontoon boat yet, also my other boat is on ebay (Item number: 130011817729) and looks like it should sell at a good price, so I am DEFINITELY interested in your motor/tranny.

What'll you charge to swap it into my truck for me?

Gonna have to pay someone to do it since I'm no mechanic.

ed455 · 07-30-2006, 12:02 AM

Have neither the time nor the space right now to swap it for you. Sorry. But you can hear it run and drive it (total grin fest) so you know it's a nice motor and well-tuned.

5150 · 07-30-2006, 05:07 PM

Those Sea-Doos are gonna get some use in our(your new) neck of the woods. Ed if you need to do a swap you are more than willing to come to my place to do it. Don't have a lot of tools, but space is good.

Here's a ttt for you.

67chevy2wd · 07-30-2006, 05:27 PM

Quote:

Originally Posted by Dixiesys

Weather and life kept me from getting fresh pics of that pontoon boat yet, also my other boat is on ebay (Item number: 130011817729) and looks like it should sell at a good price, so I am DEFINITELY interested in your motor/tranny.

What'll you charge to swap it into my truck for me?

Gonna have to pay someone to do it since I'm no mechanic.

Bring the motor and tranny up here with your truck and I wll swap it for ya as long as I get to test drive it.

Ohya bring another set of tires too.

meathead95 · 07-30-2006, 09:44 PM

what engine trans do you have now. I may swap them out for yah. I am in unionville, tn about 60 miles south of ed

Gary · 07-30-2006, 10:01 PM

Sounds like you're between me and Ed then

I'm near Huntsville.

It has a pretty clean 305 and a 3 speed auto (350 I assume). The 305 is running good but has a slight miss at idle (sticking valve the PO said) and were it brand new it wouldn't have enough power</tim allen> for me. It runs fine and pulls nice and strong but I want more oomph!

So it'd be going from 305/th350 to 406/700r4 if you're interested, let me know, if I get the motor (and I'm just waiting on my boat to sell so I have the cash to make a solid deal with) I will have to pay someone to swap it.

ed455 · 07-31-2006, 10:22 PM

ttt

ed455 · 07-31-2006, 11:28 PM

Would consider a boat (19'+ FG or 20'+ Pontoon), but no junk.

Ed

Gary · 07-31-2006, 11:44 PM

Are you keeping the headers or do those go with the motor?

ed455 · 08-01-2006, 08:55 AM

I will be using the headers on the 427.

ed455 · 08-02-2006, 02:10 PM

Would also consider a clean Suburban or crew cab in trade.

jay6891 · 08-02-2006, 05:20 PM

Sorry kind of stupid I guess but what is 19'+FG? I have a 17' bass boat with a 150 Johnson, jack plate, 24 volt troller,ect, if interested?

ed455 · 08-02-2006, 10:16 PM

Length: 19' or bigger

FG: fiberglass

jay6891 · 08-03-2006, 06:43 PM

Here is a pic of boat. pm me your email addy and I'll send more if interested.
Oh yeah, HAPPY BIRTHDAY on the 6th, mine is today, I also turned...gulp...41.

07-25-2006, 10:47 PM	#1
ed455 Captain Ed Join Date: Jul 2003 Location: Port Charlotte, FL Posts: 1,241	406 for sale - FRESH and STRONG 406 509 block (2 bolt main with ARP studs) with eagle 6" H-beams and eagle crank. Deck has plugs for strength but steam holes are open. Brass freeze plugs. Flat top Hypereutectic pistons which are very light, engine is INTERNALLY balanced. Static compression 10.5:1. Lunati hydraulic cam specs: http://www.holley.com/07104LUN.asp Edelbrock Victor Jr. with a custom-built Holley 750 vac sec carb, Pro Topline 220 cc aluminum heads with stainless valves and crane aluminum roller rockers on head studs. Polished aluminum timing cover over Cloyes double roller. 8 quart oil pan. SFI flexplate. Weiand aluminum water pump. MSD Pro Billet distributor. This motor has 400 miles on it and is nicely tuned. It does not overheat and can break the tires loose going into EVERY gear. I can smoke the tires from a stop and once it finally hooks up, it smokes the tires all over again when it shifts into second gear, then when it hooks up in second gear it does the same thing going into third. That brings me to the tranny. 700R4 nicely built with good innards and 2500 stall convertor. Motor ready to run: $3000 With tranny: $3600 Attached Images __________________ If you ain't bleedin', you ain't workin'! 1999 C3500 LS 7.4L Last edited by ed455; 07-26-2006 at 11:03 PM.

07-26-2006, 12:27 PM	#2
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: 406 for sale - FRESH and STRONG why are you selling it? __________________ 72 2wd blazer 72 swb 4x4

07-26-2006, 07:21 PM	#3
Gary Senior Member Join Date: Jan 2004 Location: Harvest, AL Posts: 544	Re: 406 for sale - FRESH and STRONG Ya why sell it? And if I buy it you gonna bring it to me and swap it into my 85 for me? If I purchase I'd want the trans too, love those 700r4's that's for sure. Truck's currently got a tired 305/3 speed auto that I'm dying to replace... I'm not that far from you, I'm about a mile from the Huntsville, AL city limit sign __________________ Gary Harris 85 Silverado - 87 Grand National 2007 Ardmore Car Show

07-26-2006, 11:01 PM	#4
ed455 Captain Ed Join Date: Jul 2003 Location: Port Charlotte, FL Posts: 1,241	Re: 406 for sale - FRESH and STRONG Selling because my 427 sbc is finished, dynoed, and ready to install. The tranny's going because my latest dyno numbers on the 427 hit 538 hp and 500 lbs. of torque. This 700R4 is very good, but not good enough for THOSE numbers. I have a hankering for a pair of Sea Doos, so trades for those considered. Oh, and by the way, it's still in the truck so it can be test driven. __________________ If you ain't bleedin', you ain't workin'! 1999 C3500 LS 7.4L Last edited by ed455; 07-26-2006 at 11:04 PM.

07-26-2006, 11:49 PM	#5
Gary Senior Member Join Date: Jan 2004 Location: Harvest, AL Posts: 544	Re: 406 for sale - FRESH and STRONG Hah too bad you're not in the market for a pontoon got a pretty decent one I'm looking to sell for around $2200. Anything that would be a real issue putting this into my 85? Wanna stay with SBC so I can keep the AC/etc without any major changes. __________________ Gary Harris 85 Silverado - 87 Grand National 2007 Ardmore Car Show

07-27-2006, 12:07 AM	#6
ed455 Captain Ed Join Date: Jul 2003 Location: Port Charlotte, FL Posts: 1,241	Re: 406 for sale - FRESH and STRONG What size pontoon?? What engine brand and size? __________________ If you ain't bleedin', you ain't workin'! 1999 C3500 LS 7.4L Last edited by ed455; 07-27-2006 at 12:09 AM.

07-27-2006, 12:16 AM	#8
Gary Senior Member Join Date: Jan 2004 Location: Harvest, AL Posts: 544	Re: 406 for sale - FRESH and STRONG It's just a 20 footer with a 40 or 50 hp outboard, nothing fancy but always got us on the water when we found time to go. __________________ Gary Harris 85 Silverado - 87 Grand National 2007 Ardmore Car Show

07-27-2006, 10:14 AM	#9
jpkerley Active Member Join Date: Oct 2005 Location: TENNESSEE Posts: 119	Re: 406 for sale - FRESH and STRONG so ed you moved to hendersonville, that's funny, thats where my parents have his boat and lives3-4 days a week. They are at creekwood marina. Since i last talked to you i ran across a swee deal on a fast burn 385, so im not as heavily in the market for a 406 but if you still have it next time im up there i will come by and take a look.

07-27-2006, 02:41 PM	#10
ed455 Captain Ed Join Date: Jul 2003 Location: Port Charlotte, FL Posts: 1,241	Re: 406 for sale - FRESH and STRONG Ok. But this 406 will run circles around a fast burn 385. __________________ If you ain't bleedin', you ain't workin'! 1999 C3500 LS 7.4L

07-29-2006, 11:44 PM	#11
ed455 Captain Ed Join Date: Jul 2003 Location: Port Charlotte, FL Posts: 1,241	Re: 406 for sale - FRESH and STRONG ttt __________________ If you ain't bleedin', you ain't workin'! 1999 C3500 LS 7.4L

07-29-2006, 11:51 PM	#12
Gary Senior Member Join Date: Jan 2004 Location: Harvest, AL Posts: 544	Re: 406 for sale - FRESH and STRONG Weather and life kept me from getting fresh pics of that pontoon boat yet, also my other boat is on ebay (Item number: 130011817729) and looks like it should sell at a good price, so I am DEFINITELY interested in your motor/tranny. What'll you charge to swap it into my truck for me? Gonna have to pay someone to do it since I'm no mechanic. __________________ Gary Harris 85 Silverado - 87 Grand National 2007 Ardmore Car Show

07-30-2006, 12:02 AM	#13
ed455 Captain Ed Join Date: Jul 2003 Location: Port Charlotte, FL Posts: 1,241	Re: 406 for sale - FRESH and STRONG Have neither the time nor the space right now to swap it for you. Sorry. But you can hear it run and drive it (total grin fest) so you know it's a nice motor and well-tuned. __________________ If you ain't bleedin', you ain't workin'! 1999 C3500 LS 7.4L

07-30-2006, 05:07 PM	#14
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: 406 for sale - FRESH and STRONG Those Sea-Doos are gonna get some use in our(your new) neck of the woods. Ed if you need to do a swap you are more than willing to come to my place to do it. Don't have a lot of tools, but space is good. Here's a ttt for you. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

07-30-2006, 09:44 PM	#16
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: 406 for sale - FRESH and STRONG what engine trans do you have now. I may swap them out for yah. I am in unionville, tn about 60 miles south of ed __________________ 72 2wd blazer 72 swb 4x4

07-30-2006, 10:01 PM	#17
Gary Senior Member Join Date: Jan 2004 Location: Harvest, AL Posts: 544	Re: 406 for sale - FRESH and STRONG Sounds like you're between me and Ed then I'm near Huntsville. It has a pretty clean 305 and a 3 speed auto (350 I assume). The 305 is running good but has a slight miss at idle (sticking valve the PO said) and were it brand new it wouldn't have enough power</tim allen> for me. It runs fine and pulls nice and strong but I want more oomph! So it'd be going from 305/th350 to 406/700r4 if you're interested, let me know, if I get the motor (and I'm just waiting on my boat to sell so I have the cash to make a solid deal with) I will have to pay someone to swap it. __________________ Gary Harris 85 Silverado - 87 Grand National 2007 Ardmore Car Show



Register or Log In To remove these advertisements.

07-31-2006, 10:22 PM	#18
ed455 Captain Ed Join Date: Jul 2003 Location: Port Charlotte, FL Posts: 1,241	Re: 406 for sale - FRESH and STRONG ttt __________________ If you ain't bleedin', you ain't workin'! 1999 C3500 LS 7.4L

07-31-2006, 11:28 PM	#19
ed455 Captain Ed Join Date: Jul 2003 Location: Port Charlotte, FL Posts: 1,241	Re: 406 for sale - FRESH and STRONG Would consider a boat (19'+ FG or 20'+ Pontoon), but no junk. Ed __________________ If you ain't bleedin', you ain't workin'! 1999 C3500 LS 7.4L Last edited by ed455; 07-31-2006 at 11:36 PM.

07-31-2006, 11:44 PM	#20
Gary Senior Member Join Date: Jan 2004 Location: Harvest, AL Posts: 544	Re: 406 for sale - FRESH and STRONG Are you keeping the headers or do those go with the motor? __________________ Gary Harris 85 Silverado - 87 Grand National 2007 Ardmore Car Show

08-01-2006, 08:55 AM	#21
ed455 Captain Ed Join Date: Jul 2003 Location: Port Charlotte, FL Posts: 1,241	Re: 406 for sale - FRESH and STRONG I will be using the headers on the 427. __________________ If you ain't bleedin', you ain't workin'! 1999 C3500 LS 7.4L

08-02-2006, 02:10 PM	#22
ed455 Captain Ed Join Date: Jul 2003 Location: Port Charlotte, FL Posts: 1,241	Re: 406 for sale - FRESH and STRONG Would also consider a clean Suburban or crew cab in trade. __________________ If you ain't bleedin', you ain't workin'! 1999 C3500 LS 7.4L

08-02-2006, 05:20 PM	#23
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	Re: 406 for sale - FRESH and STRONG Sorry kind of stupid I guess but what is 19'+FG? I have a 17' bass boat with a 150 Johnson, jack plate, 24 volt troller,ect, if interested? __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

08-02-2006, 10:16 PM	#24
ed455 Captain Ed Join Date: Jul 2003 Location: Port Charlotte, FL Posts: 1,241	Re: 406 for sale - FRESH and STRONG Length: 19' or bigger FG: fiberglass __________________ If you ain't bleedin', you ain't workin'! 1999 C3500 LS 7.4L

08-03-2006, 06:43 PM	#25
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	Re: 406 for sale - FRESH and STRONG Here is a pic of boat. pm me your email addy and I'll send more if interested. Oh yeah, HAPPY BIRTHDAY on the 6th, mine is today, I also turned...gulp...41. Attached Images __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

Register or Log In To remove these advertisements.