|
05-18-2014, 08:00 AM
|
#1 |
|
Senior Member
 
Join Date: Oct 2009
Location: Greensboro, NC
Posts: 699
|
A/C vents
I assembled this stuff to install A/C, but I changed my mind. I'm putting it in 2 groups.
Group 1: $30 plus shipping New reproduction center vent from Old Air - Very nice quality! Original center - The driver side connector was cracked, so I cut the damaged part off and plugged it. There's no other damage. Original studs - Cleaned & painted black. One original nut New vent gasket Group 2: $30 plus shipping Blue side vent pods - Very nice condition! No broken clips. They matched my dash pad. Extra set of vent balls and hose adapters Original long screws Bottom scews, but unsure if original.
__________________
 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, FleetsideUpgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar |
|
|
|
05-19-2014, 04:02 PM
|
#2 |
|
Registered User
Join Date: Oct 2013
Location: Dresden, Ontario
Posts: 647
|
Re: A/C vents
Interested in Group 2 how much to ship to 48060
Thanks
__________________
1970 Short Wide 5.3 4L60E BlackBear tune 3:73 gears, Boyd's Tank 2.5 / 4 drop 5 lug disc brakes Vintage Air 18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear |
|
|
|
|
05-19-2014, 06:33 PM
|
#3 | |
|
Senior Member
Join Date: Oct 2009
Location: Greensboro, NC
Posts: 699
|
Re: A/C vents
Quote:
__________________
1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, FleetsideUpgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar |
|
|
|
|
|
05-19-2014, 07:37 PM
|
#4 |
|
Registered User
Join Date: Oct 2013
Location: Dresden, Ontario
Posts: 647
|
Re: A/C vents
I will take group 2 Paypal ok? Please pm payment info.
I would take both groups for 65 shipped if that works for you?
__________________
1970 Short Wide 5.3 4L60E BlackBear tune 3:73 gears, Boyd's Tank 2.5 / 4 drop 5 lug disc brakes Vintage Air 18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear Last edited by Kennuck; 05-19-2014 at 07:43 PM. |
|
|
|
|
05-19-2014, 08:30 PM
|
#5 | |
|
Senior Member
Join Date: Oct 2009
Location: Greensboro, NC
Posts: 699
|
Re: A/C vents
Quote:
__________________
1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, FleetsideUpgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar |
|
|
|
|
|
05-19-2014, 09:02 PM
|
#6 |
|
Registered User
Join Date: Oct 2013
Location: Dresden, Ontario
Posts: 647
|
Re: A/C vents
Payment sent for both.
Thanks Ken
__________________
1970 Short Wide 5.3 4L60E BlackBear tune 3:73 gears, Boyd's Tank 2.5 / 4 drop 5 lug disc brakes Vintage Air 18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear |
|
|
|
|
05-19-2014, 09:16 PM
|
#7 |
|
Senior Member
Join Date: Oct 2009
Location: Greensboro, NC
Posts: 699
|
Re: A/C vents
Thanks, I'll do my best to get it packed and to the post office tomorrow.
__________________
1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, FleetsideUpgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar |
|
|
|
|
05-23-2014, 04:23 PM
|
#8 |
|
Registered User
Join Date: Oct 2013
Location: Dresden, Ontario
Posts: 647
|
Re: A/C vents
Got the vents today. That Old Air center vent is indeed a very nice part. All the rest are in good shape too. The template to cut the dash was a nice surprise. Thanks so much.
Ken
__________________
1970 Short Wide 5.3 4L60E BlackBear tune 3:73 gears, Boyd's Tank 2.5 / 4 drop 5 lug disc brakes Vintage Air 18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear |
|
|
|
|
05-23-2014, 06:27 PM
|
#9 |
|
Senior Member
Join Date: Oct 2009
Location: Greensboro, NC
Posts: 699
|
Re: A/C vents
I hope everything works out well for your project. I never sell stuff to make money, but rather pass things along that I decide not to use. I had the dash taped up on more than one occasion to cut out for the vents, but I just couldn't do it. After more than a year of seeing this stuff sit on the shelf, I realized it was time to let it go. Good luck!
__________________
1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, FleetsideUpgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar |
|
|
|
|
05-25-2014, 07:01 PM
|
#10 |
|
Registered User
Join Date: Oct 2013
Location: Dresden, Ontario
Posts: 647
|
Re: A/C vents
Got the vents installed today. The drivers side took me about an hour the old measure 20 times cut once
 the passenger side only took me 20 minutes, and the center vent another 20 minutes. The hardest part with the center vent is the template goes off the original radio hole which thanks to the p.o. I don't have. I got it figured out though. Here's a pic with Mahanian's billet radio bezel installed too. Thanks again for the nice vents.
__________________
1970 Short Wide 5.3 4L60E BlackBear tune 3:73 gears, Boyd's Tank 2.5 / 4 drop 5 lug disc brakes Vintage Air 18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear |
|
|
|
|
05-25-2014, 08:37 PM
|
#11 |
|
Senior Member
Join Date: Oct 2009
Location: Greensboro, NC
Posts: 699
|
Re: A/C vents
That looks fantastic....nice job!! I'm glad they are going to good use.
__________________
1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, FleetsideUpgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
