Can you identify this? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

texnician01 · 04-12-2002, 05:41 PM

These are pics of a 12 bolt chevy carrier (left) and an unknown carrier on the right.
I am trying to figure out what this is.

See the "Got it from behind on Ebay" thread that goes along with this.

Any help would be GREAT thanks.

------------------
1969 C-10 292 I-6 4 spd in the middle of a restoration. going to get a 327 and 3.07 gears but keeping all of the original parts so I can put it back to original later on down the road.
55 chevy 4 door 150
47 Willys CJ-2A

[This message has been edited by texnician01 (edited April 12, 2002).]

[This message has been edited by texnician01 (edited April 12, 2002).]

[This message has been edited by texnician01 (edited April 12, 2002).]

Johns70 · 04-12-2002, 05:48 PM

look at the size of them spider gears,is the pin oversize like the gears?looking at the size difference you would think its 3/4 ton or something. good luck finding out.

------------------
project 70 chev swb rebuilt 396bb{402}rebuilt th-400 3.73 limited slip

Mike C · 04-13-2002, 08:51 AM

Provide more info. What is the total height from outside bearing to outside bearing? How many ring gear bolts? what is the diameter of the bolt pattern for the ring gear bolts? Does it have any manufacturers stampings? etc. I'd guess either a Dana 60 or semi-floater 14 bolt.

------------------
70 GMC 3/4 ton Sierra Grande 402/TH400
72 Jimmy 4WD 4spd 4" & 35's
64 Corvette Coupe
68 Camaro 'vert TPI & TH700
69 Z/28 355 12.6's @110
72 Datsun 240Z-ol' reliable

texnician01 · 04-14-2002, 08:54 PM

I don't have exact specs cause I'm posting the pic for another guy. he thought that this was a 3.07 carrier and wanted a 3.73. I have a 3.73 and want a 3.07 so we were going to swap but It didn't work out cause this wasn't what he thoutht it was. I'll try to see what I can find out.

Thanks

------------------
1969 C-10 292 I-6 4 spd in the middle of a restoration. going to get a 327 and 3.07 gears but keeping all of the original parts so I can put it back to original later on down the road.
55 chevy 4 door 150
47 Willys CJ-2A

71-4x4-bb482 · 04-16-2002, 06:20 AM

I measured this diff housing here is what i come up with, from outside edge of brg housing to outside edge is 7,7/8 Ring gear flange dia is 7,1/2 Ring gear bolt pattern from ctr to ctr is 1,3/4 and it has a 12 bolt pattern for the ring gear Thanks

JimKshortstep4x4 · 04-16-2002, 07:40 AM

From the picture it looks like a 12 bolt passenger car carrier. The car carriers are taller than the truck carriers.

Jim

71-4x4-bb482 · 04-16-2002, 04:41 PM

ttt

bbs1965 · 04-16-2002, 05:27 PM

if its 12 bolt posi car carrier you made out like a BANDIT

04-12-2002, 05:41 PM	#1
texnician01 Senior Member Join Date: Mar 2002 Location: 12 Miles South of Des Moines, Iowa Posts: 359	Can you identify this? These are pics of a 12 bolt chevy carrier (left) and an unknown carrier on the right. I am trying to figure out what this is. See the "Got it from behind on Ebay" thread that goes along with this. Any help would be GREAT thanks. ------------------ 1969 C-10 292 I-6 4 spd in the middle of a restoration. going to get a 327 and 3.07 gears but keeping all of the original parts so I can put it back to original later on down the road. 55 chevy 4 door 150 47 Willys CJ-2A [This message has been edited by texnician01 (edited April 12, 2002).] [This message has been edited by texnician01 (edited April 12, 2002).] [This message has been edited by texnician01 (edited April 12, 2002).] __________________ 69 C-10, 340HP 327 55 chevy 4 door 150 47 Willys CJ-2A 05 Harley Night Train 06 1200 Sportster (Wife's bike) 70 Honda CL350 OIF2 & OIF7 Veteran Nathan & Tiffany

04-12-2002, 05:48 PM	#2
Johns70 Registered User Join Date: Dec 2001 Location: Spring Creek, nevada. U.S.A. Posts: 456	look at the size of them spider gears,is the pin oversize like the gears?looking at the size difference you would think its 3/4 ton or something. good luck finding out. ------------------ project 70 chev swb rebuilt 396bb{402}rebuilt th-400 3.73 limited slip __________________ 69 chevy short wide box project 70 GMC jimmy project

04-13-2002, 08:51 AM	#3
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,739	Provide more info. What is the total height from outside bearing to outside bearing? How many ring gear bolts? what is the diameter of the bolt pattern for the ring gear bolts? Does it have any manufacturers stampings? etc. I'd guess either a Dana 60 or semi-floater 14 bolt. ------------------ 70 GMC 3/4 ton Sierra Grande 402/TH400 72 Jimmy 4WD 4spd 4" & 35's 64 Corvette Coupe 68 Camaro 'vert TPI & TH700 69 Z/28 355 12.6's @110 72 Datsun 240Z-ol' reliable __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

04-14-2002, 08:54 PM	#4
texnician01 Senior Member Join Date: Mar 2002 Location: 12 Miles South of Des Moines, Iowa Posts: 359	I don't have exact specs cause I'm posting the pic for another guy. he thought that this was a 3.07 carrier and wanted a 3.73. I have a 3.73 and want a 3.07 so we were going to swap but It didn't work out cause this wasn't what he thoutht it was. I'll try to see what I can find out. Thanks ------------------ 1969 C-10 292 I-6 4 spd in the middle of a restoration. going to get a 327 and 3.07 gears but keeping all of the original parts so I can put it back to original later on down the road. 55 chevy 4 door 150 47 Willys CJ-2A __________________ 69 C-10, 340HP 327 55 chevy 4 door 150 47 Willys CJ-2A 05 Harley Night Train 06 1200 Sportster (Wife's bike) 70 Honda CL350 OIF2 & OIF7 Veteran Nathan & Tiffany

04-16-2002, 07:40 AM	#6
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	From the picture it looks like a 12 bolt passenger car carrier. The car carriers are taller than the truck carriers. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

04-16-2002, 06:20 AM	#5
71-4x4-bb482 Registered User Join Date: Mar 2002 Location: donnellson,Ia. USA Posts: 25	I measured this diff housing here is what i come up with, from outside edge of brg housing to outside edge is 7,7/8 Ring gear flange dia is 7,1/2 Ring gear bolt pattern from ctr to ctr is 1,3/4 and it has a 12 bolt pattern for the ring gear Thanks

04-16-2002, 04:41 PM	#7
71-4x4-bb482 Registered User Join Date: Mar 2002 Location: donnellson,Ia. USA Posts: 25	ttt

04-16-2002, 05:27 PM	#8
bbs1965 Open Sundays 10 till 10 Join Date: Nov 2000 Location: Waxahachie,Texas 75165 Posts: 1,009	if its 12 bolt posi car carrier you made out like a BANDIT __________________ 817-846-5476 parts for sale always 30 minutes south of Dallas on I35 WWW.BBSAutoSalvage.com bbs1969@direcway.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.