dana 44 spicer hubs dials - The 1947 - Present Chevrolet & GMC Truck Message Board Network

deer slayer · 03-07-2007, 10:41 PM

how many of you would interested in a set of stainless steel or r powder coated aluminum dials im tired of the plastic how about you it should direct swap out
thanks need some feedback
thanks jeff

mudmizer · 03-07-2007, 11:23 PM

I,m looking for a set. You're talking about the big spicer ones with the 3/8 x3 inch or so allen bolts and the wide spacer that go'es behind them? Bigger than most.
Maybe I,m not reading this right. Sounds like you want the metal ones because your tired of the plastic, but you have metal ones to trade???

deer slayer · 03-07-2007, 11:46 PM

im looking at making new ones that go in the steel ring you got

mudmizer · 03-08-2007, 12:01 AM

Now I understand. Your planning on making some that would swap out for the plastic ones. I thought you were looking to trade with someone. Are you able to turn them on a lathe? If you can make them and their the ones I,m thinking about that would be great. My plastic ones broke where the small pin goe's through it.

deer slayer · 03-08-2007, 12:03 AM

im gonna have some made for myself and i was wondering if anyone did want some what metal

**special-K** · 03-08-2007, 12:13 AM

Bronze.Are you talking 1/2t or 3/4t?

bloertcher · 03-08-2007, 12:15 AM

If your gonna go to the trouble,make them stainless steel.They'll be something for people to find in 1500 years,when nothing is left from the rest of the truck,and an archeoligist digs it up!

deer slayer · 03-08-2007, 12:15 AM

3/4t the choices are aluminum or stainless

mudmizer · 03-08-2007, 12:24 AM

I'm headed to the 4x4 swap here this weekend and that is one item i'll be digging for. I need the bigger ones. Some 3/4 and even 1 tons do not run these bigger, older spicer hubs. Like I mentioned earlier their the big bolt ,3/8 allen ones that are generally rounded on the edges and look really beefy.
If this is what you are having made and I can't find any this weekend then I would be interested. Did he give you a price?

deer slayer · 03-08-2007, 12:26 AM

yea those are the ones nope havent came up with a price yet

mudmizer · 03-08-2007, 12:27 AM

Thanks keep us posted.

CrashEd · 03-08-2007, 04:26 AM

If you doing them for the old external hubs. that would be cool.

**special-K** · 03-08-2007, 10:01 AM

Warn uses bronze.It`s good for 10,000 years or better.

cobinder · 03-08-2007, 11:56 AM

Those NOS plastic ones go for $60 on ebay

deer slayer · 03-08-2007, 06:40 PM

yea they also break
im thinking more towards ss or aluminun powder coated blue or yellow

**zeusflash** · 03-08-2007, 08:11 PM

Keep me posted also,blue powder coated steel would be awsome! Look original and last forever.

deer slayer · 03-08-2007, 08:35 PM

yea they would be powder coated aluminum and polished ss

**zeusflash** · 03-09-2007, 08:06 PM

That would still work for me,Deerslayer!

**special-K** · 03-09-2007, 10:39 PM

Would the powdercoat interfere with function?Would you undersize the dial to accomodate the coating thickness?The stock ones break from lack of maintainence...not cleaned or oiled.

454_72_4X4 · 03-09-2007, 11:44 PM

Quote:

Originally Posted by mudmizer

3/8 allen ones that are generally rounded on the edges and look really beefy.

Looks can be deceiving.
Those 6 3/8in bolts are what ultimately drives the wheels.
Granted I've never broken one yet...

I'd be interested if I can afford a set hub dials.

Powdercoated orange! (My truck is orange)

454_72_4X4 · 03-10-2007, 12:43 AM

This kind, right?

deer slayer · 03-10-2007, 03:49 AM

yes that style

special k i would just do the face of them

CrashEd · 03-10-2007, 03:56 AM

Would anyone have a set of them that there not going to be useing. I got the factory locks on mine.

454_72_4X4 · 03-10-2007, 08:54 PM

Quote:

Originally Posted by CrashEd

Would anyone have a set of them that there not going to be useing. I got the factory locks on mine.

???

These are factory hubs.

**special-K** · 03-10-2007, 09:20 PM

Quote:

Originally Posted by CrashEd

Would anyone have a set of them that there not going to be useing. I got the factory locks on mine.

Do you need extras or are your`s broke????

03-07-2007, 10:41 PM	#1
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	dana 44 spicer hubs dials how many of you would interested in a set of stainless steel or r powder coated aluminum dials im tired of the plastic how about you it should direct swap out thanks need some feedback thanks jeff

03-07-2007, 11:23 PM	#2
mudmizer Registered User Join Date: Jan 2007 Location: Bellingham, washington Posts: 260	Re: dana 44 spicer hubs dials I,m looking for a set. You're talking about the big spicer ones with the 3/8 x3 inch or so allen bolts and the wide spacer that go'es behind them? Bigger than most. Maybe I,m not reading this right. Sounds like you want the metal ones because your tired of the plastic, but you have metal ones to trade??? __________________ 68 4x4, 454, 4 speed, disk brakes both ends, Sold my 69 SS396 Elcamino when young & stupid

03-07-2007, 11:46 PM	#3
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	Re: dana 44 spicer hubs dials im looking at making new ones that go in the steel ring you got

03-08-2007, 12:01 AM	#4
mudmizer Registered User Join Date: Jan 2007 Location: Bellingham, washington Posts: 260	Re: dana 44 spicer hubs dials Now I understand. Your planning on making some that would swap out for the plastic ones. I thought you were looking to trade with someone. Are you able to turn them on a lathe? If you can make them and their the ones I,m thinking about that would be great. My plastic ones broke where the small pin goe's through it. __________________ 68 4x4, 454, 4 speed, disk brakes both ends, Sold my 69 SS396 Elcamino when young & stupid

03-08-2007, 12:03 AM	#5
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	Re: dana 44 spicer hubs dials im gonna have some made for myself and i was wondering if anyone did want some what metal

03-08-2007, 12:13 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: dana 44 spicer hubs dials Bronze.Are you talking 1/2t or 3/4t? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-08-2007, 12:15 AM	#7
bloertcher Registered User Join Date: Jul 2003 Location: Springfield,Mo. Posts: 305	Re: dana 44 spicer hubs dials If your gonna go to the trouble,make them stainless steel.They'll be something for people to find in 1500 years,when nothing is left from the rest of the truck,and an archeoligist digs it up! __________________ RIP Baby Jack 2-06-07 See You On The Other Side My Little Man

03-08-2007, 12:15 AM	#8
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	Re: dana 44 spicer hubs dials 3/4t the choices are aluminum or stainless

03-08-2007, 12:24 AM	#9
mudmizer Registered User Join Date: Jan 2007 Location: Bellingham, washington Posts: 260	Re: dana 44 spicer hubs dials I'm headed to the 4x4 swap here this weekend and that is one item i'll be digging for. I need the bigger ones. Some 3/4 and even 1 tons do not run these bigger, older spicer hubs. Like I mentioned earlier their the big bolt ,3/8 allen ones that are generally rounded on the edges and look really beefy. If this is what you are having made and I can't find any this weekend then I would be interested. Did he give you a price? __________________ 68 4x4, 454, 4 speed, disk brakes both ends, Sold my 69 SS396 Elcamino when young & stupid

03-08-2007, 12:26 AM	#10
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	Re: dana 44 spicer hubs dials yea those are the ones nope havent came up with a price yet

03-08-2007, 12:27 AM	#11
mudmizer Registered User Join Date: Jan 2007 Location: Bellingham, washington Posts: 260	Re: dana 44 spicer hubs dials Thanks keep us posted. __________________ 68 4x4, 454, 4 speed, disk brakes both ends, Sold my 69 SS396 Elcamino when young & stupid

03-08-2007, 04:26 AM	#12
CrashEd 72 chevy Join Date: Jan 2007 Location: Central Il Posts: 725	Re: dana 44 spicer hubs dials If you doing them for the old external hubs. that would be cool.

03-08-2007, 10:01 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: dana 44 spicer hubs dials Warn uses bronze.It`s good for 10,000 years or better. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-08-2007, 11:56 AM	#14
cobinder Everything is work in progress Join Date: Apr 2006 Location: Denver Colorado Posts: 326	Re: dana 44 spicer hubs dials Those NOS plastic ones go for $60 on ebay __________________ Good luck with your truck! How much?! It's just an old truck part!! 49 International on a 80 GMC 3/4ton 4x4 chassis 48 International KB-5 2 ton dump bed 04 Honda CRF "500" 09 Honda CRF450 fuel injected rocket 03 Suzuki hayabusa carbonfiber wheeled monster. 02 Ford diesel stretch van (toy hauler) 01 38' Monaco diesel pusher motorhome

03-08-2007, 06:40 PM	#15
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	Re: dana 44 spicer hubs dials yea they also break im thinking more towards ss or aluminun powder coated blue or yellow



Register or Log In To remove these advertisements.

03-08-2007, 08:11 PM	#16
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Re: dana 44 spicer hubs dials Keep me posted also,blue powder coated steel would be awsome! Look original and last forever. __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

03-08-2007, 08:35 PM	#17
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	Re: dana 44 spicer hubs dials yea they would be powder coated aluminum and polished ss

03-09-2007, 08:06 PM	#18
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Re: dana 44 spicer hubs dials That would still work for me,Deerslayer! __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

03-09-2007, 10:39 PM	#19
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: dana 44 spicer hubs dials Would the powdercoat interfere with function?Would you undersize the dial to accomodate the coating thickness?The stock ones break from lack of maintainence...not cleaned or oiled. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-10-2007, 12:43 AM	#21
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: dana 44 spicer hubs dials This kind, right? __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

03-10-2007, 03:49 AM	#22
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	Re: dana 44 spicer hubs dials yes that style special k i would just do the face of them

03-10-2007, 03:56 AM	#23
CrashEd 72 chevy Join Date: Jan 2007 Location: Central Il Posts: 725	Re: dana 44 spicer hubs dials Would anyone have a set of them that there not going to be useing. I got the factory locks on mine.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.