exhaust tips and exits - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pop's C-10 · 02-05-2012, 05:54 AM

Quote:

Originally Posted by boatpuller

this is the best pic i could find.other side matches.they turn down behind rear tires ol school style.

this look would fit well on your truck

77BBGMC · 02-05-2012, 03:33 PM

No chrome tips.

3r!c84 · 02-05-2012, 05:03 PM

i like that exit area ^ got any pics from under the truck?

flamingbig10 · 02-05-2012, 05:54 PM

stroker87 · 02-05-2012, 06:14 PM

I like the look of the side exit behind the tire but if its driven a lot any tip you put on it gets ugly after a while I've had chrome and stainless they just get to beat up in that location

77BBGMC · 02-05-2012, 06:25 PM

Underside looks about like Aaron's. I had them tucked up where you couldn't see them for awhile, I ended up dropping the tail pipes about an inch so I could see them.

69BBsuburban · 03-04-2012, 06:58 PM

Simple angle exit with slash cut tips...

lilpoindexter · 03-04-2012, 07:43 PM

Not stock

piecesparts · 03-04-2012, 08:13 PM

Here are acouple pics, on is the 91 Silverado that I had and th eother is my 84 GMC. I also have the same basic setup on my 2011 truck. The Megs tips take up little room and work so well.

stroker87 · 03-04-2012, 08:25 PM

this is what I did with my tips, had them in a couple different spots until I did this I like the look of the side exit behind the tire but ruined a bunch of tips over the years since the tires flings rocks and junk at them

sorry for the poor quality of the pictures only had my phone on me and the lighting sucked

INSIDIOUS '86 · 03-05-2012, 02:49 AM

Mines flush mount through the bedside before the rear tires
http://i270.photobucket.com/albums/j...R/db290b13.mp4

**RPOZ11** · 03-10-2012, 09:57 PM

Quote:

Originally Posted by 69BBsuburban

Simple angle exit with slash cut tips...

69BBsuburban :

What size tires are you running on this orange truck in this pic?
Are those Truck Rallys?

Relentless · 03-11-2012, 12:44 AM

Quote:

Originally Posted by chevymotocross

Just had the pipes put on. Was sick of my Thrush mufflers dumped under the bed making all kinds of racket inside the truck while trying to listen to music or having a convo. Night/day difference and better tone with the pipes.

Beautiful Truck! What rollpan did you go with?

**RPOZ11** · 03-11-2012, 01:35 PM

Quote:

Originally Posted by 77BBGMC

Underside looks about like Aaron's. I had them tucked up where you couldn't see them for awhile, I ended up dropping the tail pipes about an inch so I could see them.

77BBGMC...

I like the dropout location on yours.
Tight and tucked in.

What sway bar are you using ???

77BBGMC · 03-11-2012, 04:33 PM

Quote:

Originally Posted by RPOZ11

77BBGMC...

I like the dropout location on yours.
Tight and tucked in.

What sway bar are you using ???

Sway bars were a Craigslist find, I don't know the name brand. I did replace all of the bushings and hardware. The back bar is 1 1/8 and the front is 1 3/8. Back sway bar made a noticeable difference.
Posted via Mobile Device

69BBsuburban · 03-11-2012, 06:34 PM

Quote:

Originally Posted by RPOZ11

69BBsuburban :

What size tires are you running on this orange truck in this pic?
Are those Truck Rallys?

15x8 Truck ralleys with 275/60-15's......

**RPOZ11** · 03-11-2012, 07:04 PM

Quote:

Originally Posted by 69BBsuburban

15x8 Truck ralleys with 275/60-15's......

Cool!
Just what I needed to know.

Those look like BF Goodrich Radial T/A's.
Are all 4 the same size?
Any issues with clearances, rubbing, etc ?

69BBsuburban · 03-11-2012, 07:20 PM

Fronts are 235/60 15's on 7's......no issues rubbing......but the fronts are VERY close to wheelwell trim.

boatpuller · 03-12-2012, 08:07 PM

i had a few pm's asking about exhaust routing pics...so,while i had the rear up in the air doing a little maintaince.i snapped a couple for you guy's.

3r!c84 · 03-12-2012, 08:29 PM

Thankyou ! Any clearance with the rear end axle hitting the piping ? How low are you in the rear? Wanting to go a few inches lower
Posted via Mobile Device

boatpuller · 03-12-2012, 08:33 PM

Quote:

Originally Posted by 3r!c84

Thankyou ! Any clearance with the rear end axle hitting the piping ? How low are you in the rear? Wanting to go a few inches lower
Posted via Mobile Device

your welcome.....iv'e never had a problem with anything rubbing.it's a 6 in. drop in the rear with flip kit and c notch.

jrblanke · 03-12-2012, 09:04 PM

Here is mine. I got it done last week. I made sure he ran it so I could lower the truck eventually. It is a 2.5" mandrel bent system with magnaflow cats and borla mufflers. It sounds great! I can carry on a conversation in the cab, but it sounds great outside the truck. Its the exact sound I was going for. Manifolds and no H pipe.

3r!c84 · 03-12-2012, 11:28 PM

How much did it run you? Looks good. And got any vid!?
Posted via Mobile Device

jrblanke · 03-13-2012, 09:26 AM

I got the magniflow cats from advanced auto (used coupon for discount), the rest of the items I got from the shop that did the work.

2 generic magnaflow cats - $106
2.5" pipes, 4 hangers, from manifolds back - $390
2 generic borla mufflers $260

So my total was $756. I am VERY pleased with it, as it is exactly what I was looking for. Not the cheapest, but its got great quality and he nailed the look and sound I wanted.

I almost went with flowmaster 50's but I am glad I didnt because the borlas are stainless steel where the flowmasters are regular steel.

54Caddy · 03-13-2012, 08:54 PM

Jrblanke get us a video, been wanting to hear borlas on a sbc.

02-05-2012, 03:33 PM	#27
77BBGMC Registered User Join Date: May 2009 Location: Kansas Posts: 357	Re: exhaust tips and exits No chrome tips. Attached Images

02-05-2012, 05:03 PM	#28
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: exhaust tips and exits i like that exit area ^ got any pics from under the truck? __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

02-05-2012, 05:54 PM	#29
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: exhaust tips and exits __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

02-05-2012, 06:14 PM	#30
stroker87 Registered User Join Date: Nov 2011 Location: Chicago, IL Posts: 321	Re: exhaust tips and exits I like the look of the side exit behind the tire but if its driven a lot any tip you put on it gets ugly after a while I've had chrome and stainless they just get to beat up in that location

02-05-2012, 06:25 PM	#31
77BBGMC Registered User Join Date: May 2009 Location: Kansas Posts: 357	Re: exhaust tips and exits Underside looks about like Aaron's. I had them tucked up where you couldn't see them for awhile, I ended up dropping the tail pipes about an inch so I could see them. Attached Images

03-04-2012, 06:58 PM	#32
69BBsuburban Right in front of you. Join Date: Jan 2006 Location: Roy, Wa Posts: 584	Re: exhaust tips and exits Simple angle exit with slash cut tips... Attached Images __________________ Pinstriping by Josh '78 Chevy Silverado SWB (lowered, 454) '90 Chevy Sport Truck '68 Dodge Charger R/T 1930 Ford Model A

03-04-2012, 07:43 PM	#33
lilpoindexter Registered User Join Date: Sep 2010 Location: los angeles Posts: 1,134	Re: exhaust tips and exits Not stock Attached Images

03-04-2012, 08:13 PM	#34
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: exhaust tips and exits Here are acouple pics, on is the 91 Silverado that I had and th eother is my 84 GMC. I also have the same basic setup on my 2011 truck. The Megs tips take up little room and work so well. Attached Images __________________ Frank

03-04-2012, 08:25 PM	#35
stroker87 Registered User Join Date: Nov 2011 Location: Chicago, IL Posts: 321	Re: exhaust tips and exits this is what I did with my tips, had them in a couple different spots until I did this I like the look of the side exit behind the tire but ruined a bunch of tips over the years since the tires flings rocks and junk at them sorry for the poor quality of the pictures only had my phone on me and the lighting sucked Last edited by stroker87; 03-04-2012 at 08:33 PM.

03-05-2012, 02:49 AM	#36
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: exhaust tips and exits Mines flush mount through the bedside before the rear tires http://i270.photobucket.com/albums/j...R/db290b13.mp4 __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511 Last edited by INSIDIOUS '86; 03-05-2012 at 02:56 AM. Reason: Photobucket sucks

03-11-2012, 07:20 PM	#43
69BBsuburban Right in front of you. Join Date: Jan 2006 Location: Roy, Wa Posts: 584	Re: exhaust tips and exits Fronts are 235/60 15's on 7's......no issues rubbing......but the fronts are VERY close to wheelwell trim. __________________ Pinstriping by Josh '78 Chevy Silverado SWB (lowered, 454) '90 Chevy Sport Truck '68 Dodge Charger R/T 1930 Ford Model A

03-12-2012, 08:07 PM	#44
boatpuller Registered User Join Date: Sep 2005 Location: Sun City West, Az Posts: 3,822	Re: exhaust tips and exits i had a few pm's asking about exhaust routing pics...so,while i had the rear up in the air doing a little maintaince.i snapped a couple for you guy's. Attached Images __________________ " Never look up a dead dogs butt."

03-12-2012, 08:29 PM	#45
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: exhaust tips and exits Thankyou ! Any clearance with the rear end axle hitting the piping ? How low are you in the rear? Wanting to go a few inches lower Posted via Mobile Device __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

03-12-2012, 09:04 PM	#47
jrblanke Registered User Join Date: May 2011 Location: Raleigh, NC Posts: 240	Re: exhaust tips and exits Here is mine. I got it done last week. I made sure he ran it so I could lower the truck eventually. It is a 2.5" mandrel bent system with magnaflow cats and borla mufflers. It sounds great! I can carry on a conversation in the cab, but it sounds great outside the truck. Its the exact sound I was going for. Manifolds and no H pipe.

03-12-2012, 11:28 PM	#48
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: exhaust tips and exits How much did it run you? Looks good. And got any vid!? Posted via Mobile Device __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90



Register or Log In To remove these advertisements.

03-13-2012, 09:26 AM	#49
jrblanke Registered User Join Date: May 2011 Location: Raleigh, NC Posts: 240	Re: exhaust tips and exits I got the magniflow cats from advanced auto (used coupon for discount), the rest of the items I got from the shop that did the work. 2 generic magnaflow cats - $106 2.5" pipes, 4 hangers, from manifolds back - $390 2 generic borla mufflers $260 So my total was $756. I am VERY pleased with it, as it is exactly what I was looking for. Not the cheapest, but its got great quality and he nailed the look and sound I wanted. I almost went with flowmaster 50's but I am glad I didnt because the borlas are stainless steel where the flowmasters are regular steel.

03-13-2012, 08:54 PM	#50
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: exhaust tips and exits Jrblanke get us a video, been wanting to hear borlas on a sbc. __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.