700r4 transmission

[Jcfcamaro]

Thank you. My thoughts exactly. They've been using them for years. I'm thinking they don't like working on them

[Jcfcamaro]

Would this one work. I asked the year, but they haven't got back with me yet

[sweetk30]

2wd drive trans and tail shaft . might have to swap the tail shaft = full tear down of both to get shaft and swap shaft.

plus a used untested by YOU 700r4 = quick waste of time and MONEY in my book .

[Jcfcamaro]

Most shops want a core. And to bolt this up to my transfer case I'll have to buy the special tailshaft anyway. He wants 50.00

[sweetk30]

good core range is 50 or so bucks .

if doing a 700 to 205 build check tranny pan to transfer case front output yoke clearance . . . I cant recall 100% if its this combo or not that gets real close . as I don't play with 700r4 trannys my self.

if it is the super close one lots of guys run the 700r4 to th350 spacer between the tranny and tcase for the extra clearance . and if I recall it saves you from shaft buy for the different length .