info on the caddy thing for the longhorn... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brennecke · 06-29-2002, 04:31 PM

I looked it up. They quit making the 500 in 76. The 425 has a single plane cast iron intake. Four holes at the carb mount, but single plane inside.
MTS makes a trans adapter for Th400 (or any other chevy tanny) which is what they reccomend with these engines. That's what they came with, except the Eldos were front wheel drive.

BTW I got My Eldo this morning! WOOHOO!
235HP and 385FT/LBS of torque just the way she is, and with a little tweaking (OK, a lot of tweaking) 500 ponies are waiting for me.

06-29-2002, 04:31 PM	#10
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	I looked it up. They quit making the 500 in 76. The 425 has a single plane cast iron intake. Four holes at the carb mount, but single plane inside. MTS makes a trans adapter for Th400 (or any other chevy tanny) which is what they reccomend with these engines. That's what they came with, except the Eldos were front wheel drive. BTW I got My Eldo this morning! WOOHOO! 235HP and 385FT/LBS of torque just the way she is, and with a little tweaking (OK, a lot of tweaking) 500 ponies are waiting for me. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500 Last edited by brennecke; 06-29-2002 at 04:34 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.