Looking for radio power wire - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Putter · 12-08-2004, 01:27 PM

If I am correct in my thinking, the power lead is only that. It plugs in to the plastic harness that you are missing. The other two wires there are for the speaker. You can conntect that without the plastic harness plug unless you are going 100% correct. You can use regular push-on blade type connectors like go on speakers. The wires are 12+, then Speaker+, then Speaker- (starting at the right of your picture and working left.) The radio itself grounds to the dash.

12-08-2004, 01:27 PM	#1
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	If I am correct in my thinking, the power lead is only that. It plugs in to the plastic harness that you are missing. The other two wires there are for the speaker. You can conntect that without the plastic harness plug unless you are going 100% correct. You can use regular push-on blade type connectors like go on speakers. The wires are 12+, then Speaker+, then Speaker- (starting at the right of your picture and working left.) The radio itself grounds to the dash. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.