How much for Flowmaster 40 series - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mountain Man · 07-02-2002, 08:56 PM

Can any of the Canadians on this board give me an idea on where I can buy Flowmaster 40 series mufflers, and how much they are going for in your area. I have received a few quotes, and some of the shops want more than $100 per muffler, including Canadian Tire. This seems way out of whack. Need and idea as to what others have paid.

Thanks

**JIMs70GMC** · 07-03-2002, 05:45 AM

Compare to summit at $73 ea. Do you have to pay shipping to Canada?

*67Fleetsidedream* · 07-03-2002, 07:28 AM

I paid $65 for my 50 series. I bought them off the net. I searched for weeks until I found a good price. Keep looking around. Most muffler shops quote a higher price for 2 reasons. 1. They are trying to make a hell of a profit or 2. they priceing them at a installed price.

Ben

70c10 · 07-03-2002, 08:13 AM

Ebay has tons for about $60.

Low69CST · 07-03-2002, 08:21 AM

I think my 40 series were about 55........some are cheaper.

07-02-2002, 08:56 PM	#1
Mountain Man Registered User Join Date: Jan 2002 Location: Calgary, Alberta, Canada Posts: 451	How much for Flowmaster 40 series Can any of the Canadians on this board give me an idea on where I can buy Flowmaster 40 series mufflers, and how much they are going for in your area. I have received a few quotes, and some of the shops want more than $100 per muffler, including Canadian Tire. This seems way out of whack. Need and idea as to what others have paid. Thanks __________________ 72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components.

07-03-2002, 05:45 AM	#2
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Compare to summit at $73 ea. Do you have to pay shipping to Canada? __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

07-03-2002, 08:13 AM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Ebay has tons for about $60. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

07-03-2002, 08:21 AM	#5
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	I think my 40 series were about 55........some are cheaper. __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

07-03-2002, 07:28 AM	#3
67Fleetsidedream Wiseass secured himself a BAN Join Date: Nov 2000 Location: MOON!!! Posts: 2,282	I paid $65 for my 50 series. I bought them off the net. I searched for weeks until I found a good price. Keep looking around. Most muffler shops quote a higher price for 2 reasons. 1. They are trying to make a hell of a profit or 2. they priceing them at a installed price. Ben



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.