|
12-15-2004, 02:56 AM
|
#1 |
|
Registered User
Join Date: Sep 2003
Location: West Lafayette, IN
Posts: 10
|
Size of rear C-notch
Hey guys, I'v ebeen reading all, or a majority of the air bag posts, and I came up with a question I didn't see really answered. I'm looking to lay the frame on my 70 LWB. I'm going with the 1.25"-1.5" front crossmember drop, but the question I have is regarding the rear. How big of a notch will I need? I have a plan to work the bed wood around the notch and to my best calculations, it should look pretty trick. I'm leaning towards the Suicide Doors 8", but if I need the 10", no biggie. Just want to know before I have to send parts back or worse, "unweld" them. Thanks y'all, great site.
__________________
2001 Silverado Z71 Extended Cab Sportside 1970 C10 Fleetside Longbed |
|
|
|
12-15-2004, 03:10 AM
|
#2 |
|
Registered User
Join Date: Jun 2002
Location: Tri Valley California
Posts: 792
|
What size tire you going to run? That makes what size notch will need to be.
|
|
|
|
|
12-15-2004, 05:55 AM
|
#3 |
|
Registered User
Join Date: Sep 2003
Location: West Lafayette, IN
Posts: 10
|
I going to be running 20" in the front, and 22" in the rear. These are the rims I'm looking at right now: Lusso Truck Porbable 8" wide front, 9.5" or 10" in the rear, wider if I can without any major fender work.
__________________
2001 Silverado Z71 Extended Cab Sportside 1970 C10 Fleetside Longbed |
|
|
|
|
12-15-2004, 03:12 PM
|
#4 |
|
Got L.E.D.s
Join Date: Dec 2004
Location: Craig Co.
Posts: 195
|
With a 10" wide wheel in the back you won't be able to go side to side or the tires will rub. Mine rub with 17"X8.5" with 255 55 17 tires. Need to do a slight tub.
__________________
Bagged 1972 2wd Blazer http://www.earlyclassic.com/home.aspx |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
