3 trucks for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

spencra · 10-08-2004, 09:19 AM

I am putting only these trucks up for sale. I am keeping the third. Sadly I do not have any spare time to work on them right now. I would rather sell them than let them sit there until I graduate (Dec 2005). I will try to describe them briefly as best as I can. If you want to know any specifics just let me know and I will answer as best as I can.

1967 C-10: Stepside with 465 tranny (out of truck), no motor. I scrapped the bed because it required way too much work and I also sold the bench seat as I started parting it out. Front clip is in decent shape with good front fenders, rad support needs replacing as well as passenger inner fender. Good rolling chassis with 6 lug mags The cab needs some work but it's not that bad I have some extra parts to go with it.
$300

1979 Cheyenne Pickup: 8ft. bed in good cond. needs very minor work around tirewells and comes with a fiberglass cap. The cab also needs a little attention has mainly some surface rust and needs a little floor work at driver side but I do have a replacement floor pan. Needs new exhaust (dual), tranny has a leak but I am pretty sure that it is a gasket and gas tank has a high leak. Motor is a 350 8 cyl and runs. Headliner and bench seat were redone.
$700 o.b.o. Very flexible on this one.

I can e-mail pics if needed

I am also looking for a 48-53 chevy 3100 if anybody is interested in a trade.

Thanks everyone,
Larry.

spencra · 10-08-2004, 11:14 AM

I guess that link isn't working. Sorry.

blink32 · 10-08-2004, 01:50 PM

I'd like to come up and look at the 79. Give me a shout when you get back as I go up to New Britain every now and then.

Tony

spencra · 10-08-2004, 02:32 PM

Hey Tony, it's a small world. I'm from Philly and will actually be down there next Wed and Thurs. I will be back late Monday evening from San Diego so if you want to get ahold of me I can pm you my address and telephone #.

Larry.

chevy_fatman · 10-09-2004, 03:20 AM

Would you separate one of those stepside beds? maybe blink32 can haul back if he has the space? I'm 1 hr South of Harrisburg.

EDIT: Once again my reply is in the middle of the thread

blink32 · 10-09-2004, 08:00 AM

Quote:

Originally Posted by chevy_fatman

Would you separate one of those stepside beds? maybe blink32 can haul back if he has the space? I'm 1 hr South of Harrisburg.

EDIT: Once again my reply is in the middle of the thread :

That is odd that your reply is in the middle. If it all works out and I was able to secure it I wouldn't mind bringing down the bed to my neck of the woods at all for ya.

blink32 · 10-09-2004, 01:49 PM

Thats goofy I didn't get e-mails about your reply to the thread. I replied to your PM. I am def interested in taking a look. I need to come up there anyways.

spencra · 10-12-2004, 12:51 AM

Anything is possible chevy_fatman. I'm not sure exactly what it is that you are looking for but the stepside bed that is in good condition has no fenders, and the one with fenders is in daily driver condition and the fenders on the lower backside got a little dented when I hauled it back to CT a few months ago. I think that they are definately repairable though with a little bodywork skills.

Talk to you later,
Larry.

chevy_fatman · 10-12-2004, 05:40 AM

Larry, could you send me send some pics of the bed? Tony (blink32) says that he might be able to bring it down to Philly, let me know.

Thank you. Paul.

spencra · 10-21-2004, 12:57 PM

ttt.

spencra · 10-22-2004, 11:44 AM

Sorry Paul, Tony said that he would not be making it up to see the truck.
If you still want pics just let me know and I will try to get them to you.
I am very slow at getting pics though.

spencra · 10-28-2004, 08:14 AM

ttt

spencra · 11-03-2004, 02:28 PM

ttt, still got'em.

spencra · 12-22-2004, 01:24 PM

ttt, I can e-mail pics now.

10-08-2004, 09:19 AM	#1
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	3 trucks for sale I am putting only these trucks up for sale. I am keeping the third. Sadly I do not have any spare time to work on them right now. I would rather sell them than let them sit there until I graduate (Dec 2005). I will try to describe them briefly as best as I can. If you want to know any specifics just let me know and I will answer as best as I can. 1967 C-10: Stepside with 465 tranny (out of truck), no motor. I scrapped the bed because it required way too much work and I also sold the bench seat as I started parting it out. Front clip is in decent shape with good front fenders, rad support needs replacing as well as passenger inner fender. Good rolling chassis with 6 lug mags The cab needs some work but it's not that bad I have some extra parts to go with it. $300 1979 Cheyenne Pickup: 8ft. bed in good cond. needs very minor work around tirewells and comes with a fiberglass cap. The cab also needs a little attention has mainly some surface rust and needs a little floor work at driver side but I do have a replacement floor pan. Needs new exhaust (dual), tranny has a leak but I am pretty sure that it is a gasket and gas tank has a high leak. Motor is a 350 8 cyl and runs. Headliner and bench seat were redone. $700 o.b.o. Very flexible on this one. I can e-mail pics if needed I am also looking for a 48-53 chevy 3100 if anybody is interested in a trade. Thanks everyone, Larry. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course) Last edited by spencra; 12-22-2004 at 05:00 PM.

10-08-2004, 11:14 AM	#2
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	I guess that link isn't working. Sorry. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

10-08-2004, 02:32 PM	#4
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Hey Tony, it's a small world. I'm from Philly and will actually be down there next Wed and Thurs. I will be back late Monday evening from San Diego so if you want to get ahold of me I can pm you my address and telephone #. Larry. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

10-09-2004, 03:20 AM	#5
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Would you separate one of those stepside beds? maybe blink32 can haul back if he has the space? I'm 1 hr South of Harrisburg. EDIT: Once again my reply is in the middle of the thread __________________ Paul How do you make the invisible, visible?.........You take it away. Last edited by chevy_fatman; 10-09-2004 at 03:22 AM.

10-12-2004, 12:51 AM	#8
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Anything is possible chevy_fatman. I'm not sure exactly what it is that you are looking for but the stepside bed that is in good condition has no fenders, and the one with fenders is in daily driver condition and the fenders on the lower backside got a little dented when I hauled it back to CT a few months ago. I think that they are definately repairable though with a little bodywork skills. Talk to you later, Larry. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

10-08-2004, 01:50 PM	#3
blink32 Registered User Join Date: Dec 2003 Location: OTR Posts: 338	I'd like to come up and look at the 79. Give me a shout when you get back as I go up to New Britain every now and then. Tony

10-09-2004, 01:49 PM	#7
blink32 Registered User Join Date: Dec 2003 Location: OTR Posts: 338	Thats goofy I didn't get e-mails about your reply to the thread. I replied to your PM. I am def interested in taking a look. I need to come up there anyways.

10-12-2004, 05:40 AM	#9
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	bed... Larry, could you send me send some pics of the bed? Tony (blink32) says that he might be able to bring it down to Philly, let me know. Thank you. Paul. __________________ Paul How do you make the invisible, visible?.........You take it away.

10-21-2004, 12:57 PM	#10
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	ttt. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

10-22-2004, 11:44 AM	#11
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Sorry Paul, Tony said that he would not be making it up to see the truck. If you still want pics just let me know and I will try to get them to you. I am very slow at getting pics though. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

10-28-2004, 08:14 AM	#12
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	ttt __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

11-03-2004, 02:28 PM	#13
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	ttt, still got'em. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

12-22-2004, 01:24 PM	#14
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	ttt, I can e-mail pics now. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.