WTB: Power Steering Line - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sonny · 12-29-2004, 08:36 PM

I need the steel return line coming out of the steering gearbox returning fluid to the reservoir. The flare on mine is shot and it leaks. I have the 70's (Saginaw?) type.

Thanks,
Sonny

**BIG ORANGE** · 12-29-2004, 11:18 PM

Advance Auto Parts has it!!!!!!

Sonny · 12-30-2004, 08:40 AM

Will Check. Last time I checked there they couldn't find it. I guess I will check online first. Thanks for the info.

Sonny

Tx Firefighter · 12-30-2004, 09:06 AM

Usually, on a return line, all the parts store sell is the rubber section with a new hose clamps. They expect you to reuse the metal stub that screws into the box.

I've had to scrounge the metal part from a junkyard before.

Sonny · 12-30-2004, 10:28 AM

The problem is around here, the closest salvage yard that has 67-72 truck a plentiful is in Conyers. I guess I will have to make a trip up there today.

Sonny

Tx Firefighter · 12-30-2004, 10:36 AM

You can use one off of a truck up through the 70's. They will all work until the lines went to the o-ring type of seal. When you unscrew it from the box with your line wrench, it will be obvious what type of seal it uses, a flare (like your truck) or an o-ring like the later trucks.

I believe the change was around 80ish. I know my 77 Blazer still uses the same line with flare seal.

Sonny · 12-30-2004, 04:08 PM

I just checked a couple yards around here and no luck. Every one that I found was already gone. Guess I will have to get one made. Oh well...

Thanks,
Sonny

12-29-2004, 08:36 PM	#1
Sonny Active Member Join Date: Jan 2004 Location: Centerville, GA Posts: 240	WTB: Power Steering Line I need the steel return line coming out of the steering gearbox returning fluid to the reservoir. The flare on mine is shot and it leaks. I have the 70's (Saginaw?) type. Thanks, Sonny

12-29-2004, 11:18 PM	#2
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	Advance Auto Parts has it!!!!!! __________________ Things happen for a reason!

12-30-2004, 09:06 AM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Usually, on a return line, all the parts store sell is the rubber section with a new hose clamps. They expect you to reuse the metal stub that screws into the box. I've had to scrounge the metal part from a junkyard before. __________________ I'm on the Instagram- @Gearhead_Kevin

12-30-2004, 10:36 AM	#6
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	You can use one off of a truck up through the 70's. They will all work until the lines went to the o-ring type of seal. When you unscrew it from the box with your line wrench, it will be obvious what type of seal it uses, a flare (like your truck) or an o-ring like the later trucks. I believe the change was around 80ish. I know my 77 Blazer still uses the same line with flare seal. __________________ I'm on the Instagram- @Gearhead_Kevin

12-30-2004, 08:40 AM	#3
Sonny Active Member Join Date: Jan 2004 Location: Centerville, GA Posts: 240	Will Check. Last time I checked there they couldn't find it. I guess I will check online first. Thanks for the info. Sonny

12-30-2004, 10:28 AM	#5
Sonny Active Member Join Date: Jan 2004 Location: Centerville, GA Posts: 240	The problem is around here, the closest salvage yard that has 67-72 truck a plentiful is in Conyers. I guess I will have to make a trip up there today. Sonny

12-30-2004, 04:08 PM	#7
Sonny Active Member Join Date: Jan 2004 Location: Centerville, GA Posts: 240	I just checked a couple yards around here and no luck. Every one that I found was already gone. Guess I will have to get one made. Oh well... Thanks, Sonny



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.