The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-06-2005, 04:31 PM   #1
1974ChevyC10
Overworked and Underlaid
 
1974ChevyC10's Avatar
 
Join Date: May 2002
Location: Flagstaff,Arizona
Posts: 1,279
are there any benefits to switching from power steering to manual steering

on my truck as of late ive been having some troubles with the power steering.the pump is bad and since my uncle built me a fairly powerful motor im wondering if it would be of benefit to eliminate the power steering.how much would a non power steering gearbox cost approx?how hard is it to swap over.other than weight savings and power gains due to eliminating drag on the motor are there any benefits to this.my friend used to have a 77 chevy without power steering and when it was moving it didnt seem any harder to drive than a power steering equipped truck.at a standstill it was kinda hard to steer but thats not surprising.any tips or input would be great.thanks in advance
__________________
I'd rather push a Chevy than drive a Ford

The Beast-1978 C10 LWB

Red-1978 C10 LWB

(Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012
Gone but will never be forgotten-RIP

(Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012
Taken from us to soon but you will live on in our hearts-RIP
1974ChevyC10 is offline   Reply With Quote
Old 01-06-2005, 05:12 PM   #2
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,225
You'll build up your arm muscles with ion town drving, especially if ou go with large low profile tires. Changre isn't that hard, I'm doing the oppositre at moment so I don't know how much it might entail. You are inbetter shape, because you'll be eliminating the pump. Might need a different size belt depending on your set up. You'll need the manual box and the arm for the manual box (pittman I think is the official name). Unbolt, rebolt and check you alignment.
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Old 01-06-2005, 06:19 PM   #3
1974ChevyC10
Overworked and Underlaid
 
1974ChevyC10's Avatar
 
Join Date: May 2002
Location: Flagstaff,Arizona
Posts: 1,279
im pretty strong as it is but an arm workout never hurt.i figure on needing a shorter belt and obviously the manual box.a friend of mine said i could put a quick ratio manual box from a chevelle onto my truck.im not sure if that would work as im sure the pitman arms may be different from chevelle to truck.my truck has 31x10.50 tires on 15x9 rims.
__________________
I'd rather push a Chevy than drive a Ford

The Beast-1978 C10 LWB

Red-1978 C10 LWB

(Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012
Gone but will never be forgotten-RIP

(Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012
Taken from us to soon but you will live on in our hearts-RIP
1974ChevyC10 is offline   Reply With Quote
Old 01-06-2005, 06:28 PM   #4
white82
White 82
 
white82's Avatar
 
Join Date: Feb 2004
Location: Eustace, Texas
Posts: 100
better control, with a few less horsepower is better than more horsepower with less control to me just my 2 cents
__________________
1966 GTO 455 e-heads, 1982 Chevy k10 4'' lift 33’' tires, 2008 Pontiac g6 v6
white82 is offline   Reply With Quote
Old 01-06-2005, 07:05 PM   #5
1974ChevyC10
Overworked and Underlaid
 
1974ChevyC10's Avatar
 
Join Date: May 2002
Location: Flagstaff,Arizona
Posts: 1,279
i have nothing against having power steering it justs giving me hell on this truck no matter what so im getting a little tired of it so i figure ill eliminate the problem all together.ill keep all the power steering stuff if i ever decide to go back to it later on down the road.
__________________
I'd rather push a Chevy than drive a Ford

The Beast-1978 C10 LWB

Red-1978 C10 LWB

(Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012
Gone but will never be forgotten-RIP

(Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012
Taken from us to soon but you will live on in our hearts-RIP
1974ChevyC10 is offline   Reply With Quote
Old 01-08-2005, 12:22 AM   #6
oldsub86
Registered User
 
Join Date: Dec 2002
Location: Canada
Posts: 695
Just fix the power steering.
Non-power is much slower steering. There are more turns of the wheel lock to lock in order to make it so that an average driver can manage it. You won't notice it on the highway but you will in any tight manoevering. I have been collecting parts to put power steering on my old truck. I find it difficult to park in the garage without power steering. It steers so slow that you have to judge the point to turn much better or else back up and try again. Stick with power steering is my advice.
__________________
1968 Chevy - 292 with a powerglide
oldsub86 is offline   Reply With Quote
Old 01-08-2005, 11:20 AM   #7
784X4GUY
Did someone say MUD?
 
784X4GUY's Avatar
 
Join Date: Aug 2003
Location: Pullman,WA
Posts: 1,089
I agree with oldsub86 I would just stay at it and get it fixed. Then you won't have to worry bout anything. Good luck with it...Later Mike
__________________
Im in the market guys...so keep ya eyes peeled
--------------------

Mini trucks are for guys who cant get it up!
784X4GUY is offline   Reply With Quote
Old 01-12-2005, 06:14 AM   #8
jimfulco
Registered User
 
Join Date: May 2003
Location: Shreveport LA
Posts: 3,170
Car boxes won't work on a truck. They mount on the wrong side.
jimfulco is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:35 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com