how much for th350 rebuild - The 1947 - Present Chevrolet & GMC Truck Message Board Network

low 84 · 01-18-2005, 07:12 PM

how much are you guys paying for a basic th350 rebuild. just taking the tranny in, not actual;y having them uninstall/install?

thanks

phantom dually · 01-18-2005, 07:16 PM

couldnt be more than $400 or so for a basic rebuild?? I paid $1000 for a really beefed up unit with a custom built stall. This was with a manul valve body and other upgraded goodies. BTW its for sale!!

hotrodhomi · 01-18-2005, 08:01 PM

$450 in sacramento last year.

bigblock73 · 01-18-2005, 08:12 PM

$400 for me a few years back for a bench rebuild and shift kit install.

cochran63 · 01-18-2005, 08:21 PM

About 4 months ago I gave 250 to have my th350 rebuilt with the hardened 2nd gear sprag. That price was without a new converter. I think it was about 30 higher with a converter.

Blue Beard · 01-18-2005, 09:24 PM

Get the basic around here for about $250

67_SS396 · 01-18-2005, 10:27 PM

Ryan, I paid $150 at KW Trans. in Balch Springs to have the 400 rebuilt with shift kit and manual valve body minus the converter.

Fatblock82 · 01-19-2005, 03:57 AM

Isn't there a trans guy on here?I thought I seen some stuff from a trans builder,could have been a different site though.

jet mec · 01-19-2005, 04:03 AM

$300 basic rebuild w/out the converter is the going price here

*1972C10* · 01-19-2005, 05:41 AM

275 W New Convertor And Shift Kit Thats In Quinlan .

alpha_male0203 · 01-19-2005, 10:02 AM

Here in iowa where i am at anyways its hard to find people to do that. but if you do its like 400.

01-18-2005, 07:12 PM	#1
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	how much for th350 rebuild how much are you guys paying for a basic th350 rebuild. just taking the tranny in, not actual;y having them uninstall/install? thanks __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

01-18-2005, 07:16 PM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	couldnt be more than $400 or so for a basic rebuild?? I paid $1000 for a really beefed up unit with a custom built stall. This was with a manul valve body and other upgraded goodies. BTW its for sale!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-18-2005, 08:12 PM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	$400 for me a few years back for a bench rebuild and shift kit install. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-18-2005, 08:21 PM	#5
cochran63 Registered User Join Date: Jan 2004 Location: Oklahoma Posts: 1,057	About 4 months ago I gave 250 to have my th350 rebuilt with the hardened 2nd gear sprag. That price was without a new converter. I think it was about 30 higher with a converter. __________________ Youth soon passes away, but immaturity can last a life time.

01-18-2005, 09:24 PM	#6
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Get the basic around here for about $250 __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-18-2005, 08:01 PM	#3
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	$450 in sacramento last year.

01-18-2005, 10:27 PM	#7
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Ryan, I paid $150 at KW Trans. in Balch Springs to have the 400 rebuilt with shift kit and manual valve body minus the converter. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

01-19-2005, 03:57 AM	#8
Fatblock82 Registered User Join Date: Jan 2005 Posts: 11	Isn't there a trans guy on here?I thought I seen some stuff from a trans builder,could have been a different site though.

01-19-2005, 04:03 AM	#9
jet mec Registered User Join Date: Sep 2004 Location: Ga Posts: 30	$300 basic rebuild w/out the converter is the going price here

01-19-2005, 05:41 AM	#10
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	275 W New Convertor And Shift Kit Thats In Quinlan .

01-19-2005, 10:02 AM	#11
alpha_male0203 95 extended cab sportside Join Date: Jul 2004 Location: Clinton, Iowa western. Posts: 895	Here in iowa where i am at anyways its hard to find people to do that. but if you do its like 400. __________________ 95 Chevy k 1500 00 Chevy Silverado 1500 07 cobalt Old ladies car]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.