71 GMC 3/4 ton 4x4 for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mnick · 07-02-2004, 07:53 AM

I'm selling my 71 gmc 3/4 ton 4x4 , to make room for another project.
it has power steering and power disk brakes(rebuilt calipers, new pads, shoes and wheel cylinders) 350/350, no air conditioning It comes with an extra 8' bed engine has approx 60k on it, but it runs great. the truck has a 70 chevy front end on it.it will need exhaust and some body work. I installed rockers on the drivers side and have them for the passengers side. the transmission was rebuilt approx 10k ago. need to sell soon. Asking $1800 I'll post some pics later today. any Q's please post here.

1969 GMC · 07-02-2004, 11:47 AM

i would like to see pics...thank you

EDIT: any details on what bodywork it needs?

mnick · 07-02-2004, 11:04 PM

I'll be in Tenn. for the next week so I may be alittle slow at answering. I'll do the best I can. I'm having trouble posting the pictures. I'll try again tomorrow. I can email them if you send me your address. it mostly needs the passenger side rocker and a little bit of floor. the fenders and the inner fenders are usable, but have seen better days. The extra bed hasone dent on the pass side and it needs some repair on the cross supports under it. Mike

Jeremy_5 · 07-03-2004, 03:11 AM

I would like to see some pictures

Jb_five@hotmail.com

1969 GMC · 07-03-2004, 04:05 PM

I'll take some pics too... athorich@kent.edu

thanks

Burnsman · 07-06-2004, 10:51 PM

Please send pics to bburns@vikingtg.com. Thanks.

mnick · 07-07-2004, 09:07 AM

My mail sever is acting up from down here in Tenn. I'll post pics Saturday night. when i get home. thanks for the interest. Mike

mnick · 07-11-2004, 11:22 AM

here are some pics of the truck, the snow plow mount doesn't go with it.the truck has never been used with a snow plow. it has new front leaf on it also. thanks for waiting. Mike

Dean · 07-12-2004, 09:12 AM

That extra bed sure looks familiar...lol

Dean · 07-12-2004, 09:15 AM

Kinda looks like this one.... What is your new project??

mnick · 07-12-2004, 05:34 PM

It should, I got it from you. I'm working on my 83 633 BMW right now.
I'm still looking for an early Camaro.

muddyole 69 · 07-13-2004, 08:48 AM

Ever run it down at Kil Kare ? LOL !! I used to live in Xenia and I am currently in Tn as well will be coming back up tomorrow what is the street address and I will slide by pm if you would rather not post an address on the board thanks mike

mnick · 07-16-2004, 03:29 PM

I pm'd you muddyole69

wannabeburbowner · 01-20-2005, 07:24 PM

Brining up an old post...just curious if you sold the truck and bed. I am interested in the bed if you still have it.

mnick · 01-24-2005, 10:43 AM

Sorry I sold everything I had. Thanks, Mike

07-02-2004, 07:53 AM	#1
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	71 GMC 3/4 ton 4x4 for sale I'm selling my 71 gmc 3/4 ton 4x4 , to make room for another project. it has power steering and power disk brakes(rebuilt calipers, new pads, shoes and wheel cylinders) 350/350, no air conditioning It comes with an extra 8' bed engine has approx 60k on it, but it runs great. the truck has a 70 chevy front end on it.it will need exhaust and some body work. I installed rockers on the drivers side and have them for the passengers side. the transmission was rebuilt approx 10k ago. need to sell soon. Asking $1800 I'll post some pics later today. any Q's please post here.

07-02-2004, 11:47 AM	#2
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	i would like to see pics...thank you EDIT: any details on what bodywork it needs? __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650 Last edited by 1969 GMC; 07-02-2004 at 06:01 PM.

07-02-2004, 11:04 PM	#3
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	I'll be in Tenn. for the next week so I may be alittle slow at answering. I'll do the best I can. I'm having trouble posting the pictures. I'll try again tomorrow. I can email them if you send me your address. it mostly needs the passenger side rocker and a little bit of floor. the fenders and the inner fenders are usable, but have seen better days. The extra bed hasone dent on the pass side and it needs some repair on the cross supports under it. Mike Last edited by mnick; 07-02-2004 at 11:08 PM.

07-03-2004, 03:11 AM	#4
Jeremy_5 Truck addict Join Date: Sep 2003 Location: Lincoln, California Posts: 497	I would like to see some pictures Jb_five@hotmail.com __________________ 1956 Chevy Napco 1972 Cheyenne Super 1970 K20

07-03-2004, 04:05 PM	#5
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	I'll take some pics too... athorich@kent.edu thanks __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

07-06-2004, 10:51 PM	#6
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	truck Please send pics to bburns@vikingtg.com. Thanks. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

07-07-2004, 09:07 AM	#7
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	My mail sever is acting up from down here in Tenn. I'll post pics Saturday night. when i get home. thanks for the interest. Mike

07-11-2004, 11:22 AM	#8
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	here are some pics of the truck, the snow plow mount doesn't go with it.the truck has never been used with a snow plow. it has new front leaf on it also. thanks for waiting. Mike Attached Images Last edited by mnick; 07-11-2004 at 11:25 AM.

07-12-2004, 09:12 AM	#9
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	That extra bed sure looks familiar...lol

07-12-2004, 09:15 AM	#10
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	Kinda looks like this one.... What is your new project?? Attached Images

07-12-2004, 05:34 PM	#11
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	It should, I got it from you. I'm working on my 83 633 BMW right now. I'm still looking for an early Camaro.

07-13-2004, 08:48 AM	#12
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Truck Ever run it down at Kil Kare ? LOL !! I used to live in Xenia and I am currently in Tn as well will be coming back up tomorrow what is the street address and I will slide by pm if you would rather not post an address on the board thanks mike __________________ hav'n fun be'n me

07-16-2004, 03:29 PM	#13
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	I pm'd you muddyole69

01-20-2005, 07:24 PM	#14
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	Brining up an old post...just curious if you sold the truck and bed. I am interested in the bed if you still have it. __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

01-24-2005, 10:43 AM	#15
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	Sorry I sold everything I had. Thanks, Mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.