You prolly have the 2 3/4 wide shoes if you have the heavy half and the wide front rotors. You might look on the option sticker for option JB5 which is the big brakes.
Measuring the drums would let you verify what you have at the parts store.You might also measure the width of the drum, I think the 2" rear shoes have about a 4" wide rear drum. I know you can get a tape measure on the drum without removing the wheels, if you're lazy like me.
My suggestion if you have the time to wait is to buy pre bent hardlines and a new rear hose for the rear axle. I did that on my beast last time, it make the whole job easy if you can just cut the old lines odd and not wrestle with rusty fittings. I used either inline tube or classsic tube on mine, the cost was in the range of $30 for the complete axle.
01-26-2005, 08:58 PM
Hybrid Mode
