drive shaft lengths same? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

davidh · 02-22-2005, 12:54 AM

I was looking at putting a turbo 350 in my 67 when I change out the 6cy for the 8. I have a parts truck that has a powerglide tranny and driveshaft. If I'm using the short tail 350 so shouldn't I be able to use this driveshaft as a bolt in? If not how much do I need to shorten the 3speed driveshaft?

Brainchild · 02-22-2005, 02:21 AM

I believe the driveshaft is the same length.Be sure you use the same bolt holes with the frame mounts.6 cyl,and V8 mounting holes are in different locations.

02-22-2005, 12:54 AM	#1
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,220	drive shaft lengths same? I was looking at putting a turbo 350 in my 67 when I change out the 6cy for the 8. I have a parts truck that has a powerglide tranny and driveshaft. If I'm using the short tail 350 so shouldn't I be able to use this driveshaft as a bolt in? If not how much do I need to shorten the 3speed driveshaft?

02-22-2005, 02:21 AM	#2
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	I believe the driveshaft is the same length.Be sure you use the same bolt holes with the frame mounts.6 cyl,and V8 mounting holes are in different locations. __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.