|
|
|
02-23-2005, 10:49 PM
|
#1 |
|
Professional Beer Tester
Join Date: Aug 2004
Location: Louisiana
Posts: 453
|
I always replace the wheel cylinders when I replace brake shoes, because even if they're not leaking yet, sometimes they will after you disturb them, and they're not that expensive anyway. As for the master cylinder, if it's not leaking or by-passing(pedal will ooze down sometimes) then it should be OK. Check your drums for excessive wear or cracks, and make sure your springs and hardware are in good condition. When replacing the shoes, if the lining on two of the shoes is thicker or longer than the other two, put those to the rear.
60-66 Nut
__________________
60 Ford F100 Custom Cab 61 Apache Short Fleetside 64 C10 Short Stepside 65 C80 409 V8 5spd(X-Firetruck) 83 GMC 350 Olds Diesel 85 GMC Short Bed 86 GMC Short Bed 90 GMC R3500 Crew Cab 92 GMC 1500 |
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
