rochester quadrajet help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

krazy_texan · 03-09-2005, 12:14 PM

i dont know if the quadrajets on our trucks are the same as the ones used in 1979 but me and my little bro where rebuilding his carb the other day and only one of the air fuel ratio adjuster screws was there so i am trying to help him find one and i have had no luck so we did get the carb back toghether and on the truck but it does not run so great because we cant adjust it. if anybody has one or a parts carb that we can have for really dirt cheap or free would be even better. if it makes a difference i can get the carb number and post it up but we need help.

**COBALT** · 03-09-2005, 01:08 PM

Er....you're missing an idle mixture screw? Yeah, I bet it runs badly. you are a crazy texan.

Check out these guys:

http://www.carburetion.com/

I used to go to these guys for my 2bbl Rochester parts. Get the numbers off the carb and contact them. It'll be easier to get it from them than it will be to try and track it down at a swap meet, or another board member without an idea of what carb it is.

matt67350 · 03-09-2005, 05:29 PM

CARBURETORS OF TEXAS 972.206.0200
give them a call

krazy_texan · 03-09-2005, 07:14 PM

all right thanks for that guys

03-09-2005, 12:14 PM	#1
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	rochester quadrajet help i dont know if the quadrajets on our trucks are the same as the ones used in 1979 but me and my little bro where rebuilding his carb the other day and only one of the air fuel ratio adjuster screws was there so i am trying to help him find one and i have had no luck so we did get the carb back toghether and on the truck but it does not run so great because we cant adjust it. if anybody has one or a parts carb that we can have for really dirt cheap or free would be even better. if it makes a difference i can get the carb number and post it up but we need help. __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

03-09-2005, 01:08 PM	#2
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Er....you're missing an idle mixture screw? Yeah, I bet it runs badly. you are a crazy texan. Check out these guys: http://www.carburetion.com/ I used to go to these guys for my 2bbl Rochester parts. Get the numbers off the carb and contact them. It'll be easier to get it from them than it will be to try and track it down at a swap meet, or another board member without an idea of what carb it is. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

03-09-2005, 05:29 PM	#3
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	CARBURETORS OF TEXAS 972.206.0200 give them a call __________________ 69 swb stepside, rebuild and upgrade in progress

03-09-2005, 07:14 PM	#4
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	all right thanks for that guys __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.