grounds - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1974gmc · 03-15-2005, 06:17 PM

does anyone have pics of where the chassis grounds should be or could take some pics? and where could i get the ground straps? any help would be greatly appreciated.

**old Rusty C10** · 03-15-2005, 06:59 PM

most auto parts stores have the braided steel lines for the grounds with the fittings

1974gmc · 03-15-2005, 07:17 PM

would you happen to know where they go on the truck?

NeCrOmAnCeR · 03-15-2005, 08:15 PM

Placement is not that important, and you can never have to many. Just run one from the frame to the engine block (near the fuel pump works well) from the rear of the engine to the fire-wall (use a bolt screwed into an accessory hole on the back of the head), and one from the frame to the radiator support. While you are at it run one from the frame to the bed (near the rear bumper by the wiring harness) and check the ground wire on your fuel tank. Connect the negative battery cable to the engine block.

1974gmc · 03-15-2005, 08:29 PM

thanks for the help, hopefully this will help fix some of my electrical problems

03-15-2005, 06:17 PM	#1
1974gmc In Progress Join Date: Feb 2005 Location: Kamloops, BC, Canada Posts: 312	grounds does anyone have pics of where the chassis grounds should be or could take some pics? and where could i get the ground straps? any help would be greatly appreciated. __________________ 1993 Chevrolet K2500 454 4L80E 1974 GMC 1/2t 2wd Stepside 305 auto sold 1985 Ford Mustang GT 5.0 5spd

03-15-2005, 06:59 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	most auto parts stores have the braided steel lines for the grounds with the fittings __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

03-15-2005, 07:17 PM	#3
1974gmc In Progress Join Date: Feb 2005 Location: Kamloops, BC, Canada Posts: 312	would you happen to know where they go on the truck? __________________ 1993 Chevrolet K2500 454 4L80E 1974 GMC 1/2t 2wd Stepside 305 auto sold 1985 Ford Mustang GT 5.0 5spd

03-15-2005, 08:29 PM	#5
1974gmc In Progress Join Date: Feb 2005 Location: Kamloops, BC, Canada Posts: 312	thanks for the help, hopefully this will help fix some of my electrical problems __________________ 1993 Chevrolet K2500 454 4L80E 1974 GMC 1/2t 2wd Stepside 305 auto sold 1985 Ford Mustang GT 5.0 5spd

03-15-2005, 08:15 PM	#4
NeCrOmAnCeR Registered User Join Date: Feb 2004 Location: Hodgenville, Ky Posts: 735	Placement is not that important, and you can never have to many. Just run one from the frame to the engine block (near the fuel pump works well) from the rear of the engine to the fire-wall (use a bolt screwed into an accessory hole on the back of the head), and one from the frame to the radiator support. While you are at it run one from the frame to the bed (near the rear bumper by the wiring harness) and check the ground wire on your fuel tank. Connect the negative battery cable to the engine block.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.