Headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Clos'84TX · 03-14-2005, 11:21 AM

I'm new to this forum, I have a 84 c10 LWB..with a 350. I was wondering if anyone could tell me if these would fit? They are block hugger type headers.

thanks

AirMale · 03-14-2005, 01:06 PM

you can use them if you install a front motor plate. They won't clear stock mounts though. nice and shiney...oooh

saxmo · 03-15-2005, 04:45 PM

hey, I just bought the same truck (84 lwb 350) and the p.o. kept the stock manifolds. Are there any headers to "bolt right in". the truck just had a new exhaust system put in, prior to the sale, so I wanna be as user friendly as possible.

Prerunner1982 · 03-15-2005, 04:51 PM

yes saxmo, most long tube or shorties that come down towards the back should be bolt in... the problem with the block huggers is the come down in the middle... i have cheap flowtechs that have been powder coated... work just fine with not problems..

saxmo · 03-15-2005, 04:52 PM

kewl..i saw some cheapies on evilbay that'll work then.

**N2TRUX** · 03-15-2005, 10:37 PM

Quote:

Originally Posted by AirMale

you can use them if you install a front motor plate. They won't clear stock mounts though. nice and shiney...oooh

Actually yes and no. They will clear stock motor mounts on the passanger side. The drivers side will require a notch out of the motor mount cup....

cochino12 · 03-15-2005, 11:01 PM

I dont get it, everyone says blockhuggers dont fit but mine fit just fine?

**N2TRUX** · 03-17-2005, 12:04 AM

Quote:

Originally Posted by cochino12

I dont get it, everyone says blockhuggers dont fit but mine fit just fine?

OK, let me rephrase my answer then. Some will clear and some won't. I didn't bookmark the thread, but I have seen pics of BH headers that required a slight mod on the drivers side....

03-14-2005, 11:21 AM	#1
Clos'84TX Foom, foom, foom! Join Date: Mar 2005 Location: Abilene, TX Posts: 106	Headers I'm new to this forum, I have a 84 c10 LWB..with a 350. I was wondering if anyone could tell me if these would fit? They are block hugger type headers. thanks __________________ - Dan 84' LWB C10 // 2.5" from collector back. duel Turbo Mufflers // 350 w/ TH350 long Headers//3.73 rearend gears Future Mods *3/4 suspension drop*

03-14-2005, 01:06 PM	#2
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	you can use them if you install a front motor plate. They won't clear stock mounts though. nice and shiney...oooh __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

03-15-2005, 04:45 PM	#3
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	hey, I just bought the same truck (84 lwb 350) and the p.o. kept the stock manifolds. Are there any headers to "bolt right in". the truck just had a new exhaust system put in, prior to the sale, so I wanna be as user friendly as possible. __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

03-15-2005, 04:51 PM	#4
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	yes saxmo, most long tube or shorties that come down towards the back should be bolt in... the problem with the block huggers is the come down in the middle... i have cheap flowtechs that have been powder coated... work just fine with not problems.. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

03-15-2005, 04:52 PM	#5
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	kewl..i saw some cheapies on evilbay that'll work then. __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

03-15-2005, 11:01 PM	#7
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	I dont get it, everyone says blockhuggers dont fit but mine fit just fine? __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.