Will the fuel tanks switch sides??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cobb_ben · 03-29-2005, 11:24 AM

My fuel tank on my 74 is leaking, some joker before me put a screw in a hole in the tank. I noticed that gas was dripping from the plastic cover, pulled it off and saw the screw. The tank is the 16 gallon tank for the short bed. Now I have a tank for an 81 short bed, but the think is that the truck is has a left hand side tank, and the one for the 81 is a right hand tank. I was wondering if the tank will mount up on the passenger side mounds. I have the drivers side mounts I dont have a filler hole in the bed. So will the are the tanks the same for each side?????
Thanks a lot guys.

**Captkaos** · 03-29-2005, 02:34 PM

Tanks are swappable. They aren't specific to left and right sides.

72 CustomCamper · 03-29-2005, 03:33 PM

Quote:

Originally Posted by Captkaos

Tanks are swappable. They aren't specific to left and right sides.

But the sending unit is...

Chuck

*1FaastC10* · 03-29-2005, 09:03 PM

and the fill necks on them are different sizes

SanitysBane · 03-29-2005, 10:11 PM

What do you mean by the fill necks are differenet sizes? When I pulled off both of my 16 gallons for 1 20 gallon, both of the 16's were identical.

72 CustomCamper · 03-30-2005, 12:20 AM

There is a difference in filler necks between 74 and 81. The main difference is the inside where the gas pump nozzel goes. 74 would be a leaded neck with no flapper and 81 would be a unleaded neck with a flapper in there so you couldn't put a leaded nozzel in it. Just use the neck from the 74 and you will be fine...

Chuck

72 CustomCamper · 03-30-2005, 12:56 AM

I just looked it up in the Chevy Duty catalog. 73-81 has a 1 1/4"filler pipe and 82-87 has a 1 5/8 filler pipe...

Chuck

cobb_ben · 03-30-2005, 10:15 AM

Good the tank I have is an 81, same same. I took and swaped the tanks last night. Every thing was the same. The sending units were differnant, they pointed differnant ways. All I had to do was swap out the sending units. Now you probally could use the other sending unit just bend around the hoses. The filler holes on the tanks were the same. The filler neck, the only one I had, that came with the truck was a smashed in on the inside?????

03-29-2005, 11:24 AM	#1
cobb_ben Registered User Join Date: Feb 2004 Location: Fort Leonard Wood Mo Posts: 299	Will the fuel tanks switch sides??? My fuel tank on my 74 is leaking, some joker before me put a screw in a hole in the tank. I noticed that gas was dripping from the plastic cover, pulled it off and saw the screw. The tank is the 16 gallon tank for the short bed. Now I have a tank for an 81 short bed, but the think is that the truck is has a left hand side tank, and the one for the 81 is a right hand tank. I was wondering if the tank will mount up on the passenger side mounds. I have the drivers side mounts I dont have a filler hole in the bed. So will the are the tanks the same for each side????? Thanks a lot guys.

03-29-2005, 02:34 PM	#2
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Tanks are swappable. They aren't specific to left and right sides. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

03-29-2005, 10:11 PM	#5
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	What do you mean by the fill necks are differenet sizes? When I pulled off both of my 16 gallons for 1 20 gallon, both of the 16's were identical. __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

03-30-2005, 12:20 AM	#6
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	There is a difference in filler necks between 74 and 81. The main difference is the inside where the gas pump nozzel goes. 74 would be a leaded neck with no flapper and 81 would be a unleaded neck with a flapper in there so you couldn't put a leaded nozzel in it. Just use the neck from the 74 and you will be fine... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

03-30-2005, 12:56 AM	#7
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	I just looked it up in the Chevy Duty catalog. 73-81 has a 1 1/4"filler pipe and 82-87 has a 1 5/8 filler pipe... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

03-29-2005, 09:03 PM	#4
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	and the fill necks on them are different sizes

03-30-2005, 10:15 AM	#8
cobb_ben Registered User Join Date: Feb 2004 Location: Fort Leonard Wood Mo Posts: 299	Good the tank I have is an 81, same same. I took and swaped the tanks last night. Every thing was the same. The sending units were differnant, they pointed differnant ways. All I had to do was swap out the sending units. Now you probally could use the other sending unit just bend around the hoses. The filler holes on the tanks were the same. The filler neck, the only one I had, that came with the truck was a smashed in on the inside?????



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.