4" u bolt and blocks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

phantom dually · 02-20-2005, 11:13 PM

set of 4 " u bolts and blocks for sale. One block was scratched on side alittle and was touched up with black paint. These have been powedered black. $25 plus shipping.

bigarmzz · 02-20-2005, 11:53 PM

the blocks steel or aluminum?

-bigarmzz-

phantom dually · 02-21-2005, 12:03 AM

aluminum I believe with steel pin

soleeagle · 02-21-2005, 12:59 AM

are they for a 1/2 or 3/4 ton?

phantom dually · 02-21-2005, 09:29 AM

came from 1/2 ton c-10 1983 model with 8.5" 10 bolt rear.

phantom dually · 02-21-2005, 10:59 PM

Ttt

Old Chevy Lover · 02-22-2005, 12:27 AM

Will these work on the rear of a 3/4 ton 89 4x4 'burban?

phantom dually · 02-22-2005, 12:29 AM

I dont see why not?

Old Chevy Lover · 02-22-2005, 12:43 AM

I'm kinda new to this 4wd stuff, so I didn't know if the u bolts would be different because of the axle tube size between a 10 bolt and 14 bolt... what would total be to 45601?

phantom dually · 02-22-2005, 12:47 AM

$8 shipping to OHIO ubolts are 3" in diameter

Old Chevy Lover · 02-22-2005, 12:50 AM

I'll measure tomorrow and let you know either way.

phantom dually · 02-22-2005, 12:51 AM

Ok

soleeagle · 02-22-2005, 12:53 AM

The bolts probibly wont work on the 3/4 ton truck. When I ordered my lift kit a couple weeks ago that was the only difference between the 1/2 and 3/4 tons.

phantom dually · 02-22-2005, 01:04 AM

Yeah not sure myself.

Old Chevy Lover · 02-22-2005, 09:45 PM

I measured mine tonight, and they are bigger. They measure 3 1/2" from inside thread to inside thread. Thanks anyway!

phantom dually · 02-22-2005, 10:13 PM

here are a few pics

phantom dually · 02-22-2005, 10:24 PM

one more

Old Chevy Lover · 02-22-2005, 11:20 PM

I sure wish they'd fit. After pricing a new set of blocks and bolts, this is one heck of a deal...

MylilBowTie · 02-23-2005, 07:12 AM

I want them if you havent sold them. Just to make sure they are lift blocks right?

Will it need a long rear rubber brake hose? I keep thinking more and more about them I guess I will need longer rear shocks also? What all would I need to change from stock to them?

Eyegore · 02-24-2005, 05:29 PM

Phantom PM me if no one wants them. also Check your PM about a phantom grille please.

phantom dually · 02-24-2005, 11:29 PM

PM sent eyegore

phantom dually · 04-04-2005, 08:00 PM

Ttt

MylilBowTie · 04-04-2005, 11:21 PM

Im still interested in them.

Do you by chance have any pictures of them installed in the truck?

MylilBowTie · 04-06-2005, 02:41 PM

I pmed you and didn't get a response what gives?

02-20-2005, 11:13 PM	#1
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	4" u bolt and blocks set of 4 " u bolts and blocks for sale. One block was scratched on side alittle and was touched up with black paint. These have been powedered black. $25 plus shipping. Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-21-2005, 12:03 AM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	aluminum I believe with steel pin __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-21-2005, 12:59 AM	#4
soleeagle Registered User Join Date: Sep 2003 Location: Shelbyville, Indiana Posts: 614	are they for a 1/2 or 3/4 ton? __________________ Chuck '85 Chevy Silverado 4X4 '91 Chevy 4X4 Suburban http://www.cardomain.com/memberpage/545941

02-21-2005, 09:29 AM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	came from 1/2 ton c-10 1983 model with 8.5" 10 bolt rear. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-21-2005, 10:59 PM	#6
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Ttt __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-20-2005, 11:53 PM	#2
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	the blocks steel or aluminum? -bigarmzz-

02-22-2005, 12:27 AM	#7
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	Will these work on the rear of a 3/4 ton 89 4x4 'burban? __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

02-22-2005, 12:29 AM	#8
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I dont see why not? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-22-2005, 12:43 AM	#9
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	I'm kinda new to this 4wd stuff, so I didn't know if the u bolts would be different because of the axle tube size between a 10 bolt and 14 bolt... what would total be to 45601? __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

02-22-2005, 12:47 AM	#10
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	$8 shipping to OHIO ubolts are 3" in diameter __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-22-2005, 12:50 AM	#11
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	I'll measure tomorrow and let you know either way. __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

02-22-2005, 12:51 AM	#12
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Ok __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-22-2005, 12:53 AM	#13
soleeagle Registered User Join Date: Sep 2003 Location: Shelbyville, Indiana Posts: 614	The bolts probibly wont work on the 3/4 ton truck. When I ordered my lift kit a couple weeks ago that was the only difference between the 1/2 and 3/4 tons. __________________ Chuck '85 Chevy Silverado 4X4 '91 Chevy 4X4 Suburban http://www.cardomain.com/memberpage/545941

02-22-2005, 01:04 AM	#14
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Yeah not sure myself. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-22-2005, 09:45 PM	#15
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	I measured mine tonight, and they are bigger. They measure 3 1/2" from inside thread to inside thread. Thanks anyway! __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto



Register or Log In To remove these advertisements.

02-22-2005, 10:13 PM	#16
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	pics here are a few pics Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-22-2005, 10:24 PM	#17
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	one more Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-22-2005, 11:20 PM	#18
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	I sure wish they'd fit. After pricing a new set of blocks and bolts, this is one heck of a deal... __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

02-23-2005, 07:12 AM	#19
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	I want them if you havent sold them. Just to make sure they are lift blocks right? Will it need a long rear rubber brake hose? I keep thinking more and more about them I guess I will need longer rear shocks also? What all would I need to change from stock to them? __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI Last edited by MylilBowTie; 02-23-2005 at 07:23 AM.

02-24-2005, 05:29 PM	#20
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Phantom PM me if no one wants them. also Check your PM about a phantom grille please. __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

02-24-2005, 11:29 PM	#21
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	PM sent eyegore __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

04-04-2005, 08:00 PM	#22
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Ttt __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

04-04-2005, 11:21 PM	#23
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Im still interested in them. Do you by chance have any pictures of them installed in the truck? __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI Last edited by MylilBowTie; 04-04-2005 at 11:25 PM.

04-06-2005, 02:41 PM	#24
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	I pmed you and didn't get a response what gives? __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

Register or Log In To remove these advertisements.