hood pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

6772king · 03-06-2005, 03:21 PM

just got my hood done,,, and dont know if i like it or not,, I wanted something different so I fab'd up a ss camaro style scoop I'm hoping to get a new tig welder next week so I can finish it,, It will be cut out and a stainless mesh will be put in were the outline is,, I can take the good with the bad or visa versa so let me know what you think ,,,,PAINT OR DUMPSTER LOL!!!

6772king · 03-06-2005, 03:26 PM

bouncytruck · 03-06-2005, 05:28 PM

Different. It's a little hard to tell from those pictures. I think it would be nice if the ridge was carried through to the "cut out". Slap and even coat of primer on there and it will be easier to see.

vtblazer · 03-06-2005, 06:39 PM

Wow, very original thinking! Pretty interesting look.
Nice metal work.
Like Bouncy said, get some primer on it and we'll go from there...

greasemonkey · 03-06-2005, 07:46 PM

I think it's cool, US Body makes an SS hood for these trucks, I think it's fiberglass.

6772king · 03-06-2005, 08:03 PM

I like the ideer on the cutout bouncy,,,I hope to get it welded this week and I prime it and pull it outside (if it ever gets nice round here)

FRENCHBLUE72 · 03-06-2005, 09:11 PM

If you woul;d have asked me about that idea I am prety sure that I would have shot it down but it looks way good shoot some color on it and I bet it totally changes the look..

LUV2XCLR8 · 03-06-2005, 10:13 PM

bouncytruck · 03-06-2005, 10:52 PM

That Jimmy looks low, wide and aggressive in that second picture!

wyatt-erp · 03-07-2005, 12:23 AM

Looks great

71swb4x4 · 03-07-2005, 01:06 AM

Quote:

Originally Posted by bouncytruck

That Jimmy looks low, wide and aggressive in that second picture!

Of course it does bouncy, the tire is flat

You do have a sharp looking Jimmy there. Most peope go to the Chevy grill when switching to the 67/68 style hood, I like the GMC grill!

crispy · 03-07-2005, 01:44 AM

hey you know what?, it's difficult to imagine how it will look painted, but, i at least nobody else will have one like it. i say go with it.

mister.freeze · 03-09-2005, 06:35 PM

[IMG]

http://www.imagestation.com/picture/sraid99/p1dac2090a4ee0db740d69005dea0144b/f9ee1be7.jpg[/IMG]

Mine is actually the oilpan of a Continental 6-cylinder airplane engine. It comes up from under the hood. Someday, I plan to put the air cleaner in it and plate it off on the bottom so it sux in cool, fresh air. I'm also putting a tach in it.

mister.freeze · 03-09-2005, 06:37 PM

BigDave · 03-09-2005, 06:38 PM

That looks like pretty good metal work!

Just out of curiosity does any one have any pics of our trucks with a true "shaker" style hood intake?

a1gatorz · 04-17-2005, 12:46 PM

Looks good !Your truck has that aggressive stance, I been thinking of using 78 Z28 scoop with the correct matching air cleaner housing that seals tight for true cold air induction. Maybe tne maching fender vents.If anyone has these laying around by chance please let me know ,maybe we can work somthing out?a1gatorz@comcast.net

earl87gta · 04-21-2005, 02:47 AM

I have some pics some ware of a 68 with the fire bird shaker hood and the fender vents guy in PA was selling them I love the way it looked but didnt have the cash at the time.

03-06-2005, 03:21 PM	#1
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	hood pics just got my hood done,,, and dont know if i like it or not,, I wanted something different so I fab'd up a ss camaro style scoop I'm hoping to get a new tig welder next week so I can finish it,, It will be cut out and a stainless mesh will be put in were the outline is,, I can take the good with the bad or visa versa so let me know what you think ,,,,PAINT OR DUMPSTER LOL!!! __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

03-06-2005, 03:26 PM	#2
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	Attached Images __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

03-06-2005, 05:28 PM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Different. It's a little hard to tell from those pictures. I think it would be nice if the ridge was carried through to the "cut out". Slap and even coat of primer on there and it will be easier to see. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-06-2005, 07:46 PM	#5
greasemonkey Registered User Join Date: Dec 2001 Location: Pace, FL Posts: 2,155	I think it's cool, US Body makes an SS hood for these trucks, I think it's fiberglass. __________________ 1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500

03-06-2005, 08:03 PM	#6
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	I like the ideer on the cutout bouncy,,,I hope to get it welded this week and I prime it and pull it outside (if it ever gets nice round here) __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

03-06-2005, 06:39 PM	#4
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Wow, very original thinking! Pretty interesting look. Nice metal work. Like Bouncy said, get some primer on it and we'll go from there...

03-06-2005, 09:11 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	If you woul;d have asked me about that idea I am prety sure that I would have shot it down but it looks way good shoot some color on it and I bet it totally changes the look.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-06-2005, 10:13 PM	#8
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	__________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-06-2005, 10:52 PM	#9
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	That Jimmy looks low, wide and aggressive in that second picture! __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-07-2005, 12:23 AM	#10
wyatt-erp Registered User Join Date: Mar 2005 Posts: 24	Looks great

03-07-2005, 01:44 AM	#12
crispy '71 Chevy Blazer Join Date: Jan 2005 Location: San Leandro, CA (near Oakland) Posts: 96	hey you know what?, it's difficult to imagine how it will look painted, but, i at least nobody else will have one like it. i say go with it. __________________ '71 K5 Blazer (new project / daily driver) "If you are not working to improve the situation, you have no business complaining"

03-09-2005, 06:35 PM	#13
mister.freeze Registered User Join Date: Dec 2003 Location: Houston, TX Posts: 733	[IMG] http://www.imagestation.com/picture/sraid99/p1dac2090a4ee0db740d69005dea0144b/f9ee1be7.jpg[/IMG] Mine is actually the oilpan of a Continental 6-cylinder airplane engine. It comes up from under the hood. Someday, I plan to put the air cleaner in it and plate it off on the bottom so it sux in cool, fresh air. I'm also putting a tach in it. __________________ '72 K5, known as 'the Fox.'

03-09-2005, 06:37 PM	#14
mister.freeze Registered User Join Date: Dec 2003 Location: Houston, TX Posts: 733	__________________ '72 K5, known as 'the Fox.'

03-09-2005, 06:38 PM	#15
BigDave I poop on Ford! Join Date: Apr 2002 Location: Houston Area Posts: 295	That looks like pretty good metal work! Just out of curiosity does any one have any pics of our trucks with a true "shaker" style hood intake? __________________ 1972 Chevy Cheyenne - LWB, factory 402BB 2005 Chevy Suburban LT 2006 Chrysler 300C - SRT8

04-17-2005, 12:46 PM	#16
a1gatorz Registered User Join Date: Dec 2004 Location: Petaluma, CA. Posts: 22	Looks good !Your truck has that aggressive stance, I been thinking of using 78 Z28 scoop with the correct matching air cleaner housing that seals tight for true cold air induction. Maybe tne maching fender vents.If anyone has these laying around by chance please let me know ,maybe we can work somthing out?a1gatorz@comcast.net



Register or Log In To remove these advertisements.

04-21-2005, 02:47 AM	#17
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	I have some pics some ware of a 68 with the fire bird shaker hood and the fender vents guy in PA was selling them I love the way it looked but didnt have the cash at the time. __________________ Earl 68 2500 4x4 GMC Burb

Register or Log In To remove these advertisements.