72 Proportioning valve - The 1947 - Present Chevrolet & GMC Truck Message Board Network

midyearvet@aol. · 04-28-2005, 09:14 AM

Wanted 72 Proportioning valve for Disc Drum power brake setup

Thanks Rick Ca.

MOTHERTRUCKERS · 04-28-2005, 10:11 AM

New or used?

hotrodmtodd · 04-28-2005, 11:10 AM

I have a used one Rick. System still closed. I'll bring it in July if you want. The Rod

RainFade · 04-28-2005, 12:10 PM

Quote:

Originally Posted by midyearvet@aol.

Wanted 72 Proportioning valve for Disc Drum power brake setup

Thanks Rick Ca.

I'll be swapping mine for a disc/disc combo valve in a few weeks, if that other one doesn't work out you can have it for shipping.

hotrodmtodd · 04-29-2005, 08:57 AM

RainFade,
Try to get in touch with Rick if you can. That is his E-mail address. Being that you are taking yours from a driver, I would feel better about him getting a proven part. I will keep mine for him in case something changes, but we both have the same price (free) and we know yours works. I will let him know also. Take care, Hot Rod

RainFade · 04-29-2005, 09:10 AM

He sent me a PM so we are in touch.
The only downside to mine is that it'll be a few weeks before it's off the truck and I wasn't sure if he needed something faster or not... I have to do my work outside due to a lack of a shop and Ohio weather in the spring can be fickle at best.

That is a great point you make about the fact mine is on a truck filled with fluid and known good, sometimes stuff doesn't take well to sitting around

OH and assuming they aren't trash when I get them off I'll have drums, backing plates, wheel cylinders etc to spare if any Eaton users are needing cheap parts to keep their brakes going. Probably best for someone local as shipping would be an expensive P.I.T.A. I imagine.

Brian

04-28-2005, 09:14 AM	#1
midyearvet@aol. Registered User Join Date: Jun 2003 Location: Napa, Ca. Posts: 103	72 Proportioning valve Wanted 72 Proportioning valve for Disc Drum power brake setup Thanks Rick Ca.

04-28-2005, 10:11 AM	#2
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	New or used? __________________ Rest in Peace Ed. Thanks for all the good times.

04-28-2005, 11:10 AM	#3
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	P-valve I have a used one Rick. System still closed. I'll bring it in July if you want. The Rod

04-29-2005, 08:57 AM	#5
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	P-valve RainFade, Try to get in touch with Rick if you can. That is his E-mail address. Being that you are taking yours from a driver, I would feel better about him getting a proven part. I will keep mine for him in case something changes, but we both have the same price (free) and we know yours works. I will let him know also. Take care, Hot Rod

04-29-2005, 09:10 AM	#6
RainFade Registered User Join Date: Nov 2004 Location: Central Ohio Posts: 215	He sent me a PM so we are in touch. The only downside to mine is that it'll be a few weeks before it's off the truck and I wasn't sure if he needed something faster or not... I have to do my work outside due to a lack of a shop and Ohio weather in the spring can be fickle at best. That is a great point you make about the fact mine is on a truck filled with fluid and known good, sometimes stuff doesn't take well to sitting around OH and assuming they aren't trash when I get them off I'll have drums, backing plates, wheel cylinders etc to spare if any Eaton users are needing cheap parts to keep their brakes going. Probably best for someone local as shipping would be an expensive P.I.T.A. I imagine. Brian __________________ 71 K20 350/350/205, dealer air, 4" lift, Flowtech,Edel 1406 on 2101, procomp HEI,4.10's, 33x12.50x16.5 BFG MT's on slots. 4 wheel disc brakes. My lame K20 page My lame Eaton disc brake page Last edited by RainFade; 04-29-2005 at 09:14 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.