Price Check 67-68 Buddy seat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jostrans68 · 05-26-2005, 08:34 AM

I am hoping to pick these up, what do they go for in this condition? thanks

**CPNE** · 05-26-2005, 09:20 AM

Not that it matters, but those are 68's. $400 plus as they look to need very little work outside of new vinyl covers. I hope ya get them for $150 like I got mine, but that was 6 years ago when stock wasn't cool.

**1970 CST Short Wide** · 05-26-2005, 10:07 AM

CPNE is right on track. I was going to say $300-$400 easy. They look to be in good shape. Hope you can get a deal. I love mine

farside847 · 05-26-2005, 10:56 AM

All depends on how badly you want them. I have seen sets not much better than that go for $750. I myself just bought a "rebuildable" set for $200 that needs some help

Rod · 05-26-2005, 11:19 AM

I remember when stock wasn't cool...lol...nobody wanted those seats. I have mine sitting waiting to put in the tow truck one day.

CPNE and myself were on the same page back then...we did quite a few deals back then.

Those seats are great looking in a truck.

I may put a set up for sale...but wouldn't know about shipping them.

**CPNE** · 05-26-2005, 11:31 AM

Quote:

Originally Posted by Rod

I remember when stock wasn't cool...lol...nobody wanted those seats. I have mine sitting waiting to put in the tow truck one day.

CPNE and myself were on the same page back then...we did quite a few deals back then.

Hey Rod, remember when 1 ton's weren't cool either? We were on the cutting edge and didn't know it. Tis true, the cream does eventually come to the top!

Bob Moore · 05-26-2005, 01:08 PM

I don't think those are the seats you want. I think you should give me the location so I can fully evaluate them as to suitability for your use.

A Jedi knight would say "these are not the seats you seek"

Seriously if you pass let me know. I am very interested.

Thanks - Bob

**BOSS** · 05-26-2005, 07:48 PM

I have a set like those but red,they need alot more work then those do though.I couldnt get much feedback when i asked for prices though.i didnt pay much for mine but have a lot into them....lol(long story)Good luck and hope you find a deal!

jostrans68 · 05-26-2005, 09:12 PM

I bought them going to oregon tommorow to pick up. I may repair them and sell..we will see I want them for my 68 but I may be able to finance more things if I sell Jack

jostrans68 · 05-26-2005, 09:13 PM

BoB where abouts in Tacoma are you? I live off 101st and Yakima Jack

Bob Moore · 05-27-2005, 12:17 AM

I am at North 35th and Monroe - by Terry's Office Tavern. I get to the Pick-A-Part on 112th often and have a buddy at 93rd and Alaska who does these old trucks and lots of old cars also. I need to get out to Meridian Auto Wrecking soon - haven't been there for 6 months or more.

05-26-2005, 08:34 AM	#1
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	Price Check 67-68 Buddy seat I am hoping to pick these up, what do they go for in this condition? thanks Attached Images __________________ [CGTW Member former 67-72 now with a 96 silverado

05-26-2005, 09:20 AM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Not that it matters, but those are 68's. $400 plus as they look to need very little work outside of new vinyl covers. I hope ya get them for $150 like I got mine, but that was 6 years ago when stock wasn't cool. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

05-26-2005, 10:07 AM	#3
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,200	CPNE is right on track. I was going to say $300-$400 easy. They look to be in good shape. Hope you can get a deal. I love mine __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

05-26-2005, 10:56 AM	#4
farside847 Registered User Join Date: Feb 2005 Location: Bay Area, California Posts: 995	All depends on how badly you want them. I have seen sets not much better than that go for $750. I myself just bought a "rebuildable" set for $200 that needs some help __________________ 1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree

05-26-2005, 11:19 AM	#5
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	I remember when stock wasn't cool...lol...nobody wanted those seats. I have mine sitting waiting to put in the tow truck one day. CPNE and myself were on the same page back then...we did quite a few deals back then. Those seats are great looking in a truck. I may put a set up for sale...but wouldn't know about shipping them. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

05-26-2005, 01:08 PM	#7
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	I don't think those are the seats you want. I think you should give me the location so I can fully evaluate them as to suitability for your use. A Jedi knight would say "these are not the seats you seek" Seriously if you pass let me know. I am very interested. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow Last edited by Bob Moore; 05-26-2005 at 01:09 PM.

05-26-2005, 07:48 PM	#8
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	I have a set like those but red,they need alot more work then those do though.I couldnt get much feedback when i asked for prices though.i didnt pay much for mine but have a lot into them....lol(long story)Good luck and hope you find a deal! __________________ Support our site Norwood Survivor

05-26-2005, 09:12 PM	#9
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	I bought them going to oregon tommorow to pick up. I may repair them and sell..we will see I want them for my 68 but I may be able to finance more things if I sell Jack __________________ [CGTW Member former 67-72 now with a 96 silverado

05-26-2005, 09:13 PM	#10
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	BoB where abouts in Tacoma are you? I live off 101st and Yakima Jack __________________ [CGTW Member former 67-72 now with a 96 silverado

05-27-2005, 12:17 AM	#11
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	I am at North 35th and Monroe - by Terry's Office Tavern. I get to the Pick-A-Part on 112th often and have a buddy at 93rd and Alaska who does these old trucks and lots of old cars also. I need to get out to Meridian Auto Wrecking soon - haven't been there for 6 months or more. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.