|
make sure the splines on the inside of the wheel are clean and undamaged. mine slid right on, took me about 45 minutes to makemy stuff work without the donor parts. if your horn has a wire like mine did. i pulled the metal rod out and caught all the parts. soldered a wire on to the spring, put the sprind and the little keeper thingy back in and then crimped a connector on the end of the wire. clear as mudd?
__________________
1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags
'02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's  (the family car)
1993 Cherokee work ride/weekend wheeler
|
05-27-2005, 03:19 AM
Hybrid Mode
