Aftermarket Radio In Glovebox Pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kelsfine69 · 05-24-2005, 10:08 PM

I want to install a aftermarket radio in my glovebox and put the factory radio in the dash. I would like to see how this is done. Does anyone have any pics they could post. Mayby even half radio/ half glovebox

GMC AMI · 05-25-2005, 05:43 AM

Very hard to control while driving and unsafe if you try.

knsmodels · 05-25-2005, 10:16 AM

My truck is radio delete and I was thinking of doing the same thing putting an aftermarket in the glove box......as far as controlling it allot of the new radios come with a remote so I think that would be safe....Thanks...Paul K

blazerparts · 05-25-2005, 10:24 AM

The only thing about a IR remote is it won't shoot through the glove box door. A previous thread on this discussed a repeater of sorts...........I never saw the final word on that idea.

farside847 · 05-25-2005, 10:55 AM

I did it in my truck, it has a remote that sits on the seat...

I posted some pics a long time ago, but cant find them now

It was a marine radio, had a realy cool digital read out remote.

67chevemall · 05-25-2005, 12:12 PM

Ya there is lots of posts on this.
If your good with 12 volt take the remote sensor of the deck and install it on the heater box or somewhere the remot can "hit it". Then you don't have to open the
g box

JayDubBlazer · 05-25-2005, 01:18 PM

you can put a IR relay light so you can use the remote while the door is closed

EROC · 05-25-2005, 03:46 PM

Most of the major brands sell a wired remote that you can mount to the dash within reach. If I want to change channels I just pop the door open and use the remote.

hgs_notes · 05-25-2005, 04:32 PM

One of the member parts suppliers sells in dash replacement radios with remote for the CD, they offer IR remotes and radio signal remotes. Radio signal remotes are getting more common, I have one for my digital cable, the box is in the basement.

HG

kelsfine69 · 05-27-2005, 11:33 PM

made a radio/ glovebox half and half out of alum. should install this weekend, mabey even some pics

05-24-2005, 10:08 PM	#1
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Aftermarket Radio In Glovebox Pics I want to install a aftermarket radio in my glovebox and put the factory radio in the dash. I would like to see how this is done. Does anyone have any pics they could post. Mayby even half radio/ half glovebox

05-25-2005, 05:43 AM	#2
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Very hard to control while driving and unsafe if you try. __________________ 1968 Chevy 4x4 307 4 speed

05-25-2005, 10:16 AM	#3
knsmodels I make Models Join Date: May 2005 Location: Bucks, PA Posts: 626	I would like to see any pics of this also..... My truck is radio delete and I was thinking of doing the same thing putting an aftermarket in the glove box......as far as controlling it allot of the new radios come with a remote so I think that would be safe....Thanks...Paul K

05-25-2005, 10:24 AM	#4
blazerparts No,I DON'T have Tourett's Join Date: Mar 2005 Location: Reno, NV Posts: 556	The only thing about a IR remote is it won't shoot through the glove box door. A previous thread on this discussed a repeater of sorts...........I never saw the final word on that idea. __________________ '72 K5 CST 350/350 Daily Driver '69 GMC3500 Camper Special CST Flatbed 396/400 Upgraded to show truck '69 GMC 2500 L6292, 3spd beater

05-25-2005, 10:55 AM	#5
farside847 Registered User Join Date: Feb 2005 Location: Bay Area, California Posts: 995	I did it in my truck, it has a remote that sits on the seat... I posted some pics a long time ago, but cant find them now It was a marine radio, had a realy cool digital read out remote. __________________ 1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree

05-25-2005, 12:12 PM	#6
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Ya there is lots of posts on this. If your good with 12 volt take the remote sensor of the deck and install it on the heater box or somewhere the remot can "hit it". Then you don't have to open the g box __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

05-25-2005, 01:18 PM	#7
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,883	you can put a IR relay light so you can use the remote while the door is closed __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

05-25-2005, 03:46 PM	#8
EROC Active Member Join Date: Jan 2005 Location: Salem,Virginia Posts: 123	Most of the major brands sell a wired remote that you can mount to the dash within reach. If I want to change channels I just pop the door open and use the remote. __________________ 69 GMC 2500 Camper Special 88 S10 Pickup 04 Impala I ship UPS from 24153 Last edited by EROC; 09-14-2006 at 06:15 AM.

05-25-2005, 04:32 PM	#9
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	One of the member parts suppliers sells in dash replacement radios with remote for the CD, they offer IR remotes and radio signal remotes. Radio signal remotes are getting more common, I have one for my digital cable, the box is in the basement. HG __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

05-27-2005, 11:33 PM	#10
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	made a radio/ glovebox half and half out of alum. should install this weekend, mabey even some pics



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.