fire wall pics please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tnblazerk5** · 06-03-2005, 11:08 AM

i need a pic of a 67 fire wall and what each hole is for, please

smbrouss70 · 06-03-2005, 11:44 AM

Here ya go!

**tnblazerk5** · 06-03-2005, 11:52 AM

thanks

**CPNE** · 06-03-2005, 12:00 PM

Close, but no cigar. Thats a 71/72 cab. E-brake is not located there in 67/68 and 67-70 cabs used a different throttle linkage setup.

JimKshortstep4x4 · 06-03-2005, 12:07 PM

Jeff,

As usual you have a sharp eye out!

You beat me to the responce.

Jim

**tnblazerk5** · 06-03-2005, 12:23 PM

ok i still need a 67 one then

i also need a pic showing where the wireing harness is routed

the harness that was in my truck was junk and had been rewires so many times i
have no clue what goes where

*bisquik65* · 06-08-2005, 07:39 PM

You have a 67 GMC cab in your yard

,take i pic of the firewall,post it here and someone will put what hole is what...

**tnblazerk5** · 06-08-2005, 08:18 PM

ok i will try that then

**tnblazerk5** · 06-08-2005, 08:39 PM

**RPOZ11** · 06-09-2005, 12:07 AM

Quote:

Originally Posted by smbrouss70

Here ya go!

smbrouss70 · 06-09-2005, 12:17 AM

Don't give me credit for it, I found that on our board.

68w/sbc406 · 06-09-2005, 12:31 AM

going off of my 68

**tnblazerk5** · 06-09-2005, 12:57 AM

oh cool thanks
yes thats just a black spot

and mine had a choke cable , do they make a cloke delete for there ?

and where yours has body plugs,on mine the top one looks like there was wires in there at sum point and the lower one is the tail light harness on mine

is the taillight harness in the rite place on mine ?

and i got a clutch delete cover coming friday

i am just trying to figer out what goes where on the firewall my wireing is all messed up

*bisquik65* · 06-09-2005, 08:47 AM

This 67 GMC cab had a 351 V6 in it...hince the Big Block clutch location...Thats my old cab he has there. Thats why the clutch hole is lower than normal...

68w/sbc406 · 06-09-2005, 09:06 AM

ok yeah the tail light harness comes out of the lower one (my truck aint here so i was looking at pictures and it just looked like a plug

**tnblazerk5** · 06-09-2005, 02:05 PM

Quote:

Originally Posted by bisquik65

This 67 GMC cab had a 351 V6 in it...hince the Big Block clutch location...Thats my old cab he has there. Thats why the clutch hole is lower than normal...

so i could but a big block in the 1 ton then ? what did ya do with the clutch set up out if it ?

purple gas · 06-09-2005, 02:19 PM

on my 67 GM, the tail light harness plugs in towards the centre of the cab near the throttle linkage. A little above & to the right, I think. But I'm usually sort of upside down when I'm workin there.

06-03-2005, 11:08 AM	#1
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	fire wall pics please i need a pic of a 67 fire wall and what each hole is for, please

06-03-2005, 11:44 AM	#2
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Here ya go! Attached Images __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

06-03-2005, 12:00 PM	#4
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Close, but no cigar. Thats a 71/72 cab. E-brake is not located there in 67/68 and 67-70 cabs used a different throttle linkage setup. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

06-03-2005, 12:23 PM	#6
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	ok i still need a 67 one then i also need a pic showing where the wireing harness is routed the harness that was in my truck was junk and had been rewires so many times i have no clue what goes where Last edited by tnblazerk5; 06-03-2005 at 12:25 PM.

06-09-2005, 12:17 AM	#11
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Don't give me credit for it, I found that on our board. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

06-03-2005, 11:52 AM	#3
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	thanks

06-03-2005, 12:07 PM	#5
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Jeff, As usual you have a sharp eye out! You beat me to the responce. Jim

06-08-2005, 07:39 PM	#7
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	You have a 67 GMC cab in your yard ,take i pic of the firewall,post it here and someone will put what hole is what...

06-08-2005, 08:18 PM	#8
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	ok i will try that then

06-08-2005, 08:39 PM	#9
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598

06-09-2005, 12:31 AM	#12
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	going off of my 68 Attached Images __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

06-09-2005, 12:57 AM	#13
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	oh cool thanks yes thats just a black spot and mine had a choke cable , do they make a cloke delete for there ? and where yours has body plugs,on mine the top one looks like there was wires in there at sum point and the lower one is the tail light harness on mine is the taillight harness in the rite place on mine ? and i got a clutch delete cover coming friday i am just trying to figer out what goes where on the firewall my wireing is all messed up

06-09-2005, 08:47 AM	#14
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	This 67 GMC cab had a 351 V6 in it...hince the Big Block clutch location...Thats my old cab he has there. Thats why the clutch hole is lower than normal...

06-09-2005, 09:06 AM	#15
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	ok yeah the tail light harness comes out of the lower one (my truck aint here so i was looking at pictures and it just looked like a plug __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

06-09-2005, 02:19 PM	#17
purple gas Registered User Join Date: Oct 2004 Location: saskatoon, planet earth Posts: 696	on my 67 GM, the tail light harness plugs in towards the centre of the cab near the throttle linkage. A little above & to the right, I think. But I'm usually sort of upside down when I'm workin there. __________________ I got a bench seat baby, you don't have to sit over there.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.