07-18-2005, 07:22 PM | #1 |
Registered User
Join Date: Dec 2003
Location: here
Posts: 5,789
|
Who has a cheap
upper radiator support & both lower rubbers? Im too lazy to go to the junkyard & take them off. I seem to have lost mine. How can a guy lose a big piece of metal like that? GEEEEZ...corn
|
07-18-2005, 08:28 PM | #2 |
Registered User
Join Date: Apr 2003
Location: Central florida
Posts: 3,223
|
hey cornfed, ive got the upper support panel for a 350 rad
what about the driveshaft, never heard back from ya |
07-18-2005, 09:31 PM | #3 |
Registered User
Join Date: Dec 2003
Location: here
Posts: 5,789
|
Are the panels all the same? My radiator is from my '84 w/305. I still want the driveshaft but I dont have quite that much cash right now. If you still have it when I get paid again Ill probably get it from you then...corn
|
07-18-2005, 10:33 PM | #4 |
Registered User
Join Date: Apr 2003
Location: Central florida
Posts: 3,223
|
lookin at the chevy duty catalog, yours is the 81-87 "radiator upper cover panel, IE what locks the top part of the radiator
only 14.95 according to the catalog i have 78-845 for the two bolt tabs on each side 78-846 for the one with the single bolt hole coming out of each side ill have the driveshaft for a while, so its still yours |
07-20-2005, 08:07 PM | #5 |
What can I do next ????
Join Date: Jan 2005
Location: Birmingham, Alabama 35126
Posts: 59
|
Rad
Hey corn I thought the rad was held into place by two small brackes and rubber that bolt to the rad support. I have an 85 k5 and I think they are the same back to 81. now my 74 454 had the large plate that went all the way across the radiator and you could not see the top. but on the later ones the fan shroud is off set to cover everything up and it bolts to the two small brackets that hold the rad. so maybe you are not crazy and just overlooking the brackets. probably the ones in front of the tire to keep if from rolling away (done that before and went insane looking)
|
07-20-2005, 08:27 PM | #6 |
Registered User
Join Date: Dec 2003
Location: here
Posts: 5,789
|
Hmmm, its been so long sinse I tore it apart that I cant remember. You may be right. Ill keep digging. Thanks...corn
|
Bookmarks |
|
|