COMP.CAMS!!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HvyChevy454 · 04-17-2002, 09:04 PM

i bought one from comp cams and it was supposed to be small enough to work w/ stock springs and push rods. and b/c it was supposed to work i went w/ the smaller cam to save money. well i didnt work and i ended up having to buy a kit to retro fit adjustable rockers plus new rockers for it for another $200.

------------------
Lutz, Fl
My Team Website
The Heavy Chevy Website
------------------

72 Cheyenne 10 LWB GM 12-bolt 3.08 w/ Auburn Posi
91 454 Edel Intake 850 cfm carb Comp Cam 268/.500 Hedman Headers Dual 3'' Exhaust
71 Cheyenne 20 4x4 Fact. A/C PS PB Tilt Currently in the works...
Put it to the floor...

04-17-2002, 09:04 PM	#3
HvyChevy454 Slowly getting CRSS... Join Date: Jul 2001 Location: Lutz, Florida Posts: 656	i bought one from comp cams and it was supposed to be small enough to work w/ stock springs and push rods. and b/c it was supposed to work i went w/ the smaller cam to save money. well i didnt work and i ended up having to buy a kit to retro fit adjustable rockers plus new rockers for it for another $200. ------------------ Lutz, Fl My Team Website The Heavy Chevy Website ------------------ 72 Cheyenne 10 LWB GM 12-bolt 3.08 w/ Auburn Posi 91 454 Edel Intake 850 cfm carb Comp Cam 268/.500 Hedman Headers Dual 3'' Exhaust 71 Cheyenne 20 4x4 Fact. A/C PS PB Tilt Currently in the works... Put it to the floor... __________________ -Nic Lutz, Fl My Team Website The Heavy Chevy Website ------------------ 72 Cheyenne 10 LWB GM 12-bolt 3.08 w/ Auburn Posi 91 454 Edel Performer RPM Intake 750 cfm carb Comp Cam 268/.495 Hedman Headers Dual 3'' Exhaust 71 Cheyenne 20 4x4 Fact. A/C PS PB Tilt Currently in the works... Speak Softly and Carry A Big Block... There is No replacement for Displacement... "If everything seems under control, you're just not going fast enough." - Mario Andretti



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.