|
08-26-2005, 12:48 AM
|
#1 |
|
Gettin It One Pice At A Time
Join Date: Oct 2004
Location: everett, washington
Posts: 2,688
|
spair
can someone show/tell me how the spair tire is attached to the side of the bed? I dont have the hardwear anymore*well never had it lol*. thanks
__________________
RIP ELJAY   Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby |
|
|
|
08-26-2005, 03:52 PM
|
#2 |
|
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,904
|
there should be a brace that bolts to the top lip of the bedside and bolts to the bottom of the floor. It leaves room between it and the inner bedside. there is a slot that a bolt rides in to allow for taller or shorter tires/wheels... then you could either put a washer and wingnut or you could go with a lug nut..
__________________
Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
