Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
10-08-2005, 10:16 PM | #1 |
Junk/Daily Driver Club
Join Date: Feb 2004
Location: Manheim, PA 17545
Posts: 253
|
Blazer rear leafsprings
I have a set of springs that were on a 72 GMC shortbed frame I got. They are 3 ply+ overload, 2 1/4" wide, 4" lift, 47 1/4" eye to eye. The center pin is offset to the front 1 7/8". Does anyone know if these measurements are wright for a blazer? The springs don`t look like they were realiy used just bolted to that frame and in storage.
Thanks Willis
__________________
Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker. There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened! |
10-10-2005, 09:30 PM | #2 |
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,728
|
Blazers and 4x4 should have 2 1/2" springs and not the 2 1/2" that the 2x4's had.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
10-10-2005, 10:10 PM | #3 |
Junk/Daily Driver Club
Join Date: Feb 2004
Location: Manheim, PA 17545
Posts: 253
|
Mike I take it that you ment 2 1/4" where have the second 2 1/2".
Thanks Willis
__________________
Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker. There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened! |
10-20-2005, 09:54 PM | #4 |
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,728
|
Re: Blazer rear leafsprings
Right. Stupid fingers...
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
Bookmarks |
|
|