Can Someone Take A Picture Of...... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ncblazer72 · 10-21-2005, 01:26 PM

I Need A Picture Of The Top Of The Windshield Frame FROM A 1972 BLAZER. I Need Replace Mine And A Guy Is Gonna Fab One But We Dont Know What It Should Look Like. Thanks Soo Much You Guys.

**special-K** · 10-21-2005, 01:54 PM

No pictures handy.How bad is it?Just holes along the top,the whole top of frame above w/s or into the posts,too?I`m just asking to see if it might be better to get a frame cut off another one.I`m sure your guy has good judgement on this.But,he may feel finding another useable frame is not possible.

garedclay · 10-21-2005, 02:35 PM

See http://www.clayharrison.com/truck/projects3.html for a couple shots of my windshield frame.

ncblazer72 · 10-21-2005, 03:09 PM

Gardclay...thanks for the link and pictures, This will help alot.

Special K.....I bought the blazer never really thought about looking up there since the ton top was on it. I bought a softtop...took the top and found nothing up there. The pillars are fine though. I guess the guy I bought from forget to tell me about that rust part of the truck. I know next time to ask.

Thanks guys for your help. Just hope this guy can do it right the first time. I am dying to shed this top off the blazer for good.

*72CSTC5* · 10-24-2005, 12:02 AM

Hey look above this post, efabman has one he is going to cut up and sell. You better jump on it if you can. They are hard to find rust free that someone is willing to cut up and sell. Goodluck.

10-21-2005, 01:26 PM	#1
ncblazer72 Registered User Join Date: Oct 2005 Location: North Carolina Posts: 10	Can Someone Take A Picture Of...... I Need A Picture Of The Top Of The Windshield Frame FROM A 1972 BLAZER. I Need Replace Mine And A Guy Is Gonna Fab One But We Dont Know What It Should Look Like. Thanks Soo Much You Guys. Last edited by ncblazer72; 10-21-2005 at 01:27 PM.

10-21-2005, 01:54 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Can Someone Take A Picture Of...... No pictures handy.How bad is it?Just holes along the top,the whole top of frame above w/s or into the posts,too?I`m just asking to see if it might be better to get a frame cut off another one.I`m sure your guy has good judgement on this.But,he may feel finding another useable frame is not possible. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-21-2005, 02:35 PM	#3
garedclay Registered User Join Date: Aug 2005 Location: Athens, GA Posts: 12	Re: Can Someone Take A Picture Of...... See http://www.clayharrison.com/truck/projects3.html for a couple shots of my windshield frame. __________________ www.clayharrison.com/truck/ '72 K5 "Georgia Red" Blazer (driver and dawg hauler) '72 Cheyenne Super C20 LWB (parts and projects)

10-21-2005, 03:09 PM	#4
ncblazer72 Registered User Join Date: Oct 2005 Location: North Carolina Posts: 10	Re: Can Someone Take A Picture Of...... Gardclay...thanks for the link and pictures, This will help alot. Special K.....I bought the blazer never really thought about looking up there since the ton top was on it. I bought a softtop...took the top and found nothing up there. The pillars are fine though. I guess the guy I bought from forget to tell me about that rust part of the truck. I know next time to ask. Thanks guys for your help. Just hope this guy can do it right the first time. I am dying to shed this top off the blazer for good.

10-24-2005, 12:02 AM	#5
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,522	Re: Can Someone Take A Picture Of...... Hey look above this post, efabman has one he is going to cut up and sell. You better jump on it if you can. They are hard to find rust free that someone is willing to cut up and sell. Goodluck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.