Dana44 gear swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

59Apache4WD · 11-21-2005, 01:43 PM

I should have put in my post that the D44, and the rest of the drivetrain- sb350,sm465,np205- is from a '74 k10, so that may make a difference in the seal question. I think after reading a few other threads I'll probably take it down to the gear shop that did the rear end, I'm thinking about either an air locker or or other posi type diff. for the front also. I'm not planning on doing any rock crawling (the '59 body is way too straight for that!), but I do want to do some mild trails and I'm considering moving to Maine next year so snow/ice will be an issue.
Thanks for the advice/info drnk2mny Stan & Chris
Jeff

11-21-2005, 01:43 PM	#1
59Apache4WD Registered User Join Date: Feb 2005 Location: SF Bay Area Posts: 12	Re: Dana44 gear swap I should have put in my post that the D44, and the rest of the drivetrain- sb350,sm465,np205- is from a '74 k10, so that may make a difference in the seal question. I think after reading a few other threads I'll probably take it down to the gear shop that did the rear end, I'm thinking about either an air locker or or other posi type diff. for the front also. I'm not planning on doing any rock crawling (the '59 body is way too straight for that!), but I do want to do some mild trails and I'm considering moving to Maine next year so snow/ice will be an issue. Thanks for the advice/info drnk2mny Stan & Chris Jeff



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.