Edelbrock#1411 Calibration Reference Chart - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bill72BB · 12-02-2005, 12:00 PM

Can someone post a pic of the 1411 chart , I misplaced my book ,and only get a red X on the Edelbrock site , but i can get the other charts just can't see the 1411

http://www.edelbrock.com/automotive/eps_1411.html
Thanks

**68 Stepside** · 12-02-2005, 03:58 PM

I can't see the pic either, and I sure could use it too

I'll look around and see if I can find anything.

**68 Stepside** · 12-02-2005, 04:02 PM

Here ya go Bill!
http://www.telusplanet.net/public/gi...lvord/1411.htm

Bill72BB · 12-02-2005, 05:01 PM

Thanks I owe you big time , Just spent an hour looking for the book in the garage . must be in the house .???

crazy longhorn · 12-02-2005, 05:10 PM

Let me know what works on that Bill.....I ran a 1407 on my 383, till i got done p!ssin with it. I went back to the old "standby" (3310 Holley).that old truck runs so much better.....still rough on tires tho

crazyL

Bill72BB · 12-02-2005, 05:21 PM

It's been running great since I took off the 1406 and put the 1411 on about a year ago . I was just going to lean it out a bit to see if I can gt some better milage without losing too much power . It is running rich right now .
I had jetted the 1406 richer and it ran great on the BB but when I pulled the plugs they looked lean that is why I went to the 1411 .

Quote:

Originally Posted by crazy longhorn

Let me know what works on that Bill.....I ran a 1407 on my 383, till i got done p!ssin with it. I went back to the old "standby" (3310 Holley).that old truck runs so much better.....still rough on tires tho

crazyL

crazy longhorn · 12-02-2005, 06:43 PM

Best of luck Bill......I would like to hear how she goes.my 383 ran fat with the 1407 in factory spec(I heard that the hand choke carbs were that way).i installed a fresh 1411 on a fresh 400 Poncho (in a 67 firechicken). It ran pretty good right out of the box, & the guy didnt come back for more work , or any complaints.....L

Bill72BB · 12-05-2005, 12:44 PM

Crazy L, I decided to go 8% leaner on both the Cruise and Power range , Will pick up the rods and Jets this afternoon .( Jet's .104, Rods 070X042 )
After I drive it for awhile will let you know how it goes .

Quote:

Originally Posted by crazy longhorn

Best of luck Bill......I would like to hear how she goes.my 383 ran fat with the 1407 in factory spec(I heard that the hand choke carbs were that way).i installed a fresh 1411 on a fresh 400 Poncho (in a 67 firechicken). It ran pretty good right out of the box, & the guy didnt come back for more work , or any complaints.....L

12-02-2005, 03:58 PM	#2
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,690	Re: Edelbrock#1411 Calibration Reference Chart I can't see the pic either, and I sure could use it too I'll look around and see if I can find anything. __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

12-02-2005, 04:02 PM	#3
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,690	Re: Edelbrock#1411 Calibration Reference Chart Here ya go Bill! http://www.telusplanet.net/public/gi...lvord/1411.htm __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

12-02-2005, 05:01 PM	#4
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	Re: Edelbrock#1411 Calibration Reference Chart Thanks I owe you big time , Just spent an hour looking for the book in the garage . must be in the house .??? __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen , Last edited by Bill72BB; 12-02-2005 at 05:04 PM.

12-02-2005, 05:10 PM	#5
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Re: Edelbrock#1411 Calibration Reference Chart Let me know what works on that Bill.....I ran a 1407 on my 383, till i got done p!ssin with it. I went back to the old "standby" (3310 Holley).that old truck runs so much better.....still rough on tires tho crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

12-02-2005, 06:43 PM	#7
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Re: Edelbrock#1411 Calibration Reference Chart Best of luck Bill......I would like to hear how she goes.my 383 ran fat with the 1407 in factory spec(I heard that the hand choke carbs were that way).i installed a fresh 1411 on a fresh 400 Poncho (in a 67 firechicken). It ran pretty good right out of the box, & the guy didnt come back for more work , or any complaints.....L __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

12-02-2005, 12:00 PM	#1
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	Edelbrock#1411 Calibration Reference Chart Can someone post a pic of the 1411 chart , I misplaced my book ,and only get a red X on the Edelbrock site , but i can get the other charts just can't see the 1411 http://www.edelbrock.com/automotive/eps_1411.html Thanks __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen , Last edited by Bill72BB; 12-02-2005 at 12:01 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.