68 3/4 4x4 Front Brake Hoses - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Erl · 04-19-2002, 08:47 AM

Need a set of front brake hoses for a 68 3/4 4x4. NAPA says N/A, GMCPaul, and LMC do not have them listed either. Anyone know a source or an alternative part number?
Thanks

**Classic Heartbeat** · 04-19-2002, 09:56 AM

http://www.inlinetube.com/ WES www.ClassicHeartbeat.com

------------------
Click (Here) to visit our on-line catolog.
E-mail me WEHEPP@attbi.com
72 BB Chevy Blazer
72 BB Chevy Short Fleet
72 SB 3/4 Ton 4X4
72 SB 1/2 Ton SWB 4X4
70 BB Chevy Short Step
70 SB Chevy Short Fleet
69 SB Chevy Short Step
68 SB Chevy Short Step
68 BB GMC Long Fleet
67 GMC 1/2 ton Panel
"Founder" Classic Heartbeat Pickup Club
Olympia, Washington's "Home For Wayword Chevys"
www.ClassicHeartbeat.com

**68SWB4x4** · 04-19-2002, 10:52 AM

yes inlinetube can custom make any brake line or hose you need, great stuff

------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET

Erl · 04-19-2002, 11:17 AM

Inline only has stainless steel braded lines and they are a bit pricey ($115). I would like to find some rubber ones for less money if possible. Any other sources?

BubbaGreen · 04-19-2002, 12:06 PM

Are you sure that in-line tube doesnt have
the rubber version, they say its available
in there catalog. You do mean the flex line
correct.
American Classic has one listed in there
catalog p/n BR1998 68-70 4x4 1/2 or 3/4T
rear for 35.00

OOPS! I see you ask for fronts!
Classicindustries list one for the front
as well 68-70 3/4T 4x4 as FH112 24.00 each!

Goodluck

------------------
71 Chevy C-10 SWB Fleetside WAS:307w/3-on-the-tree NOW:350TBI/700R4/3.73
See it at www.prismnet.com/~grzanich

[This message has been edited by BubbaGreen (edited April 19, 2002).]

Erl · 04-19-2002, 01:02 PM

Sorry Buba that was for a rear brake hose (FH112). Need the front. Any other suggestions?

BubbaGreen · 04-19-2002, 01:52 PM

Sorry Erl,
I browsed thru most of my catalogs...
and didnt find anything. The only thing
I can think of is: If you still have your
old original, maybe you can ask inline
tube if they can duplicated it -or- maybe
classictube can...I dont really know. Keep
asking on the board, someone has to have
been in the same situation.

------------------
71 Chevy C-10 SWB Fleetside WAS:307w/3-on-the-tree NOW:350TBI/700R4/3.73
See it at www.prismnet.com/~grzanich

Erl · 04-19-2002, 03:59 PM

I am going to give GMCPaul a call next week. Did not want to bother him until I had checked it out myself.

Thanks for you help

digger · 04-19-2002, 06:14 PM

you mite try a hydraulic supply store, they mite be able to match it. trying to help. lol.

------------------
kansas city, ks.
72 chevy swb 4x4, a/c (in resto)
70 chevy 3/4t 4x4,lwb soon to be daily driver
89 chvy 1/2t 4x4, present driver

71 K TWENTY · 04-20-2002, 06:01 PM

You could use the ones from a 73' and later 4x4 as long as you use the bolt you took out of yours , but grind off a little bit, since the newer style brass fitting is a bit thinner. This is what I did on my 71'.

breeh · 04-20-2002, 09:00 PM

I had the same problem and the only way that I was able to solve it was to replace the drum brake frontend with a disc setup!

------------------
72 GMC 3/4 4X4 350/350
67 Camaro 454/M22 (Soon to be 427/700R4)

pickupman · 04-20-2002, 09:49 PM

Give Right Stuff a call, they should have them, if not let me know I think I can still get them for you. I believe that there are around $25 each. Sorry I don't have their # anywhere.

------------------
67 1/2 ton 4wd custom cab
72 1/2 ton 4wd super
71 1/2 BB super cheyenne shortbed
71 stepside shortbed
67 panel project
70 3/4 ton 2wd suburban
72 3/4 GMC 2wd sierra grande
New and used Truck parts
Front Royal, Va.
www.s-c-t-p.com

*racedvl* · 04-20-2002, 10:12 PM

Raybestos is a big N/A as well. I don't know, but there is a NAPA by me that will make brake hoses, a/c lines, ect for you. They take the same style ends for you, and put hose in between them for ya.

------------------

http://hometown.aol.com/racedvl/racedvl69index.html

Woodstock,IL.northwest of Chicago

It's not what you buy, it's what you build!!

I did not climb to the top of the food chain, to become a vegetarian.

For some pics of my truck.

Pont · 04-20-2002, 10:36 PM

Erl, If you can't find them anywhere and would settle for used hoses, I have the ones that came off my 67 4x4, I think they are the same. They worked fine when I removed them.

Let me know if interested..........

------------------
67 SWB 4x4 - 396 BB / SM420 4 spd
8" lift / 15x14 Welds & 35X14.5 SSR's
Grants Pass, OR

*racedvl* · 04-21-2002, 12:48 PM

Helpful info?

The wheel cylinders from a K10, and a K20 in the front are the SAME. So, that end of the hose would be the same, correct me if I'm wrong. Hhhhmmmmm, i just noticed that there are no brake hosses for K10's either.....hhhmmmm.

Ok!!!!! 1974-1976 Jeep Cherokee's also use the same front wheel cylinders!! And guess what??? They still make front hoses for them!! The Raybestos # is.......

BH36800

If some one with a 67-70 4x4 could mayby get one of these and see if they will work on our trucks, that would be awesome!! If I had a 67-70 4x4, i would do it myself.

------------------

http://hometown.aol.com/racedvl/racedvl69index.html

Woodstock,IL.northwest of Chicago

It's not what you buy, it's what you build!!

I did not climb to the top of the food chain, to become a vegetarian.

For some pics of my truck.

Erl · 04-22-2002, 09:22 AM

I am putting a power brake booster on my truck and wanted to replace all the rubber hoses. That is what started this discussion. When I purge the brake system I will see if the cherokee hose will match. I will post the results, good or bad.

*racedvl* · 04-22-2002, 02:34 PM

Cool deal.

------------------

http://hometown.aol.com/racedvl/racedvl69index.html

Woodstock,IL.northwest of Chicago

It's not what you buy, it's what you build!!

I did not climb to the top of the food chain, to become a vegetarian.

For some pics of my truck.

04-19-2002, 08:47 AM	#1
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	68 3/4 4x4 Front Brake Hoses Need a set of front brake hoses for a 68 3/4 4x4. NAPA says N/A, GMCPaul, and LMC do not have them listed either. Anyone know a source or an alternative part number? Thanks __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

04-19-2002, 09:56 AM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	http://www.inlinetube.com/ WES www.ClassicHeartbeat.com ------------------ Click (Here) to visit our on-line catolog. E-mail me WEHEPP@attbi.com 72 BB Chevy Blazer 72 BB Chevy Short Fleet 72 SB 3/4 Ton 4X4 72 SB 1/2 Ton SWB 4X4 70 BB Chevy Short Step 70 SB Chevy Short Fleet 69 SB Chevy Short Step 68 SB Chevy Short Step 68 BB GMC Long Fleet 67 GMC 1/2 ton Panel "Founder" Classic Heartbeat Pickup Club Olympia, Washington's "Home For Wayword Chevys" www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

04-19-2002, 10:52 AM	#3
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	yes inlinetube can custom make any brake line or hose you need, great stuff ------------------ My Truck pictures www.xframeimpala.com 68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET" 56 big window short stepside 235 dual 1 brls 64ImpalaSS 327 70 C10 LWB fleetside custom/10 350/TH350 IM me on aol SN= SHAGROLET __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

04-19-2002, 11:17 AM	#4
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	Inline only has stainless steel braded lines and they are a bit pricey ($115). I would like to find some rubber ones for less money if possible. Any other sources? __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

04-19-2002, 12:06 PM	#5
BubbaGreen Senior Member Join Date: Mar 2001 Location: Cedar Park, TX Posts: 686	Are you sure that in-line tube doesnt have the rubber version, they say its available in there catalog. You do mean the flex line correct. American Classic has one listed in there catalog p/n BR1998 68-70 4x4 1/2 or 3/4T rear for 35.00 OOPS! I see you ask for fronts! Classicindustries list one for the front as well 68-70 3/4T 4x4 as FH112 24.00 each! Goodluck ------------------ 71 Chevy C-10 SWB Fleetside WAS:307w/3-on-the-tree NOW:350TBI/700R4/3.73 See it at www.prismnet.com/~grzanich [This message has been edited by BubbaGreen (edited April 19, 2002).] __________________ 71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich

04-19-2002, 01:02 PM	#6
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	Sorry Buba that was for a rear brake hose (FH112). Need the front. Any other suggestions? __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

04-19-2002, 01:52 PM	#7
BubbaGreen Senior Member Join Date: Mar 2001 Location: Cedar Park, TX Posts: 686	Sorry Erl, I browsed thru most of my catalogs... and didnt find anything. The only thing I can think of is: If you still have your old original, maybe you can ask inline tube if they can duplicated it -or- maybe classictube can...I dont really know. Keep asking on the board, someone has to have been in the same situation. ------------------ 71 Chevy C-10 SWB Fleetside WAS:307w/3-on-the-tree NOW:350TBI/700R4/3.73 See it at www.prismnet.com/~grzanich __________________ 71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich

04-19-2002, 03:59 PM	#8
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	I am going to give GMCPaul a call next week. Did not want to bother him until I had checked it out myself. Thanks for you help __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

04-19-2002, 06:14 PM	#9
digger Registered User Join Date: Dec 1999 Location: kansas city Posts: 767	you mite try a hydraulic supply store, they mite be able to match it. trying to help. lol. ------------------ kansas city, ks. 72 chevy swb 4x4, a/c (in resto) 70 chevy 3/4t 4x4,lwb soon to be daily driver 89 chvy 1/2t 4x4, present driver __________________ kansas city, ks. selling out 72 chevy swb 4x4, a/c (in resto) 70 chevy 3/4t 4x4,lwb 89 chvy 1/2t 4x4, 99 chevy silverado, ext. cab 3 door present driver

04-20-2002, 06:01 PM	#10
71 K TWENTY Registered User Join Date: Jan 2002 Location: New Ipswich, NH USA Posts: 21	You could use the ones from a 73' and later 4x4 as long as you use the bolt you took out of yours , but grind off a little bit, since the newer style brass fitting is a bit thinner. This is what I did on my 71'. __________________ FRAME OFF RESTORATION ON K-20 4X4, 1971.

04-20-2002, 09:00 PM	#11
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	I had the same problem and the only way that I was able to solve it was to replace the drum brake frontend with a disc setup! ------------------ 72 GMC 3/4 4X4 350/350 67 Camaro 454/M22 (Soon to be 427/700R4) __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

04-20-2002, 09:49 PM	#12
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Give Right Stuff a call, they should have them, if not let me know I think I can still get them for you. I believe that there are around $25 each. Sorry I don't have their # anywhere. ------------------ 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super 71 1/2 BB super cheyenne shortbed 71 stepside shortbed 67 panel project 70 3/4 ton 2wd suburban 72 3/4 GMC 2wd sierra grande New and used Truck parts Front Royal, Va. www.s-c-t-p.com __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

04-20-2002, 10:12 PM	#13
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Raybestos is a big N/A as well. I don't know, but there is a NAPA by me that will make brake hoses, a/c lines, ect for you. They take the same style ends for you, and put hose in between them for ya. ------------------ http://hometown.aol.com/racedvl/racedvl69index.html Woodstock,IL.northwest of Chicago It's not what you buy, it's what you build!! I did not climb to the top of the food chain, to become a vegetarian. For some pics of my truck.

04-20-2002, 10:36 PM	#14
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	Erl, If you can't find them anywhere and would settle for used hoses, I have the ones that came off my 67 4x4, I think they are the same. They worked fine when I removed them. Let me know if interested.......... ------------------ 67 SWB 4x4 - 396 BB / SM420 4 spd 8" lift / 15x14 Welds & 35X14.5 SSR's Grants Pass, OR __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

04-21-2002, 12:48 PM	#15
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Helpful info? The wheel cylinders from a K10, and a K20 in the front are the SAME. So, that end of the hose would be the same, correct me if I'm wrong. Hhhhmmmmm, i just noticed that there are no brake hosses for K10's either.....hhhmmmm. Ok!!!!! 1974-1976 Jeep Cherokee's also use the same front wheel cylinders!! And guess what??? They still make front hoses for them!! The Raybestos # is....... BH36800 If some one with a 67-70 4x4 could mayby get one of these and see if they will work on our trucks, that would be awesome!! If I had a 67-70 4x4, i would do it myself. ------------------ http://hometown.aol.com/racedvl/racedvl69index.html Woodstock,IL.northwest of Chicago It's not what you buy, it's what you build!! I did not climb to the top of the food chain, to become a vegetarian. For some pics of my truck.



Register or Log In To remove these advertisements.

04-22-2002, 09:22 AM	#16
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	I am putting a power brake booster on my truck and wanted to replace all the rubber hoses. That is what started this discussion. When I purge the brake system I will see if the cherokee hose will match. I will post the results, good or bad. __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

04-22-2002, 02:34 PM	#17
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Cool deal. ------------------ http://hometown.aol.com/racedvl/racedvl69index.html Woodstock,IL.northwest of Chicago It's not what you buy, it's what you build!! I did not climb to the top of the food chain, to become a vegetarian. For some pics of my truck.

Register or Log In To remove these advertisements.