How do I adjust the wiper arm? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BudTX · 12-19-2005, 12:28 PM

1983 K20.

The passenger side wiper arm rests well under the bottom edge of the windshield when it is down all they way. Is there a way to adjust the travel so that it rests on the bottom of the windshield where it should be?

The driver's side wiper is fine.

Thanks,

Bud

piecesparts · 12-19-2005, 12:31 PM

You take the wiper arm off of the post (That is grooved or splined) and move it one groove up and re-install it. Simple, especially if you have a wiper arm tool. I made one out of a piece of metal and it works well. The principal of the tool is to allow you the ease of rocking the arm splined part to sguare it up with the wiper post. It will then slide off and back on with ease. Snap-on sells them also.

bigblock73 · 12-19-2005, 12:33 PM

You have to take off the wiper and reposition it on the stalk...thats it.

^^^Pierce beat me to it.

MylilBowTie · 12-19-2005, 01:15 PM

Wiper arm tool, Does that help with the overly tight spring that is a mpita? I need something that will keep the arm strait so I can better position the arm. I got it close enough but not where I want it. Got tired of messing with the wiper arm after about an hour it was like splitting hairs.

BudTX · 12-19-2005, 02:03 PM

Thanks for the replies.

I guess that I have to go hunt up this "wiper arm tool."

Man, I hate buying a tool for a one-time job. Maybe I can find a shop that will let me borrow theirs...

bigblock73 · 12-19-2005, 02:14 PM

A very small screwdriver will work as well.

82 Silverado 4X · 12-19-2005, 08:22 PM

I bought a Lisle wiper arm removal tool from JC Whitney for $5.00. Worked great.

piecesparts · 12-20-2005, 07:14 PM

Like I said, I made one out of metal and it worked until I could buy a Snap-on tool. Mine looked like a 3/4" wide by 3/4" bent hook. I simply hooked on the bottom back of the wiper piece and applied pressure downward on top of the wiper arm to allow for the spring loaded piec to straigthen up on the splined wiper post. The metal has to be fairly heavy to stand up to the force needed.

12-19-2005, 12:28 PM	#1
BudTX Registered User Join Date: Sep 2005 Location: Miami County, kansas Posts: 40	How do I adjust the wiper arm? 1983 K20. The passenger side wiper arm rests well under the bottom edge of the windshield when it is down all they way. Is there a way to adjust the travel so that it rests on the bottom of the windshield where it should be? The driver's side wiper is fine. Thanks, Bud __________________ Current GM toys: 1983 Chevrolet K20 4x4, 2004.5 Chevrolet 2500HD LT Duramax 4x4

12-19-2005, 12:31 PM	#2
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: How do I adjust the wiper arm? You take the wiper arm off of the post (That is grooved or splined) and move it one groove up and re-install it. Simple, especially if you have a wiper arm tool. I made one out of a piece of metal and it works well. The principal of the tool is to allow you the ease of rocking the arm splined part to sguare it up with the wiper post. It will then slide off and back on with ease. Snap-on sells them also.

12-19-2005, 12:33 PM	#3
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: How do I adjust the wiper arm? You have to take off the wiper and reposition it on the stalk...thats it. ^^^Pierce beat me to it. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 12-19-2005 at 12:33 PM.

12-19-2005, 01:15 PM	#4
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Re: How do I adjust the wiper arm? Wiper arm tool, Does that help with the overly tight spring that is a mpita? I need something that will keep the arm strait so I can better position the arm. I got it close enough but not where I want it. Got tired of messing with the wiper arm after about an hour it was like splitting hairs. __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

12-19-2005, 02:03 PM	#5
BudTX Registered User Join Date: Sep 2005 Location: Miami County, kansas Posts: 40	Re: How do I adjust the wiper arm? Thanks for the replies. I guess that I have to go hunt up this "wiper arm tool." Man, I hate buying a tool for a one-time job. Maybe I can find a shop that will let me borrow theirs... __________________ Current GM toys: 1983 Chevrolet K20 4x4, 2004.5 Chevrolet 2500HD LT Duramax 4x4

12-19-2005, 02:14 PM	#6
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: How do I adjust the wiper arm? A very small screwdriver will work as well. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

12-19-2005, 08:22 PM	#7
82 Silverado 4X Genuine Chevrolet Join Date: Feb 2003 Location: South West Pennsylvania. Posts: 582	Re: How do I adjust the wiper arm? I bought a Lisle wiper arm removal tool from JC Whitney for $5.00. Worked great. __________________ George 82 Silverado LWB 4x4 350 SM465 NP208 77 Chevrolet Blazer Chalet 400 TH350 NP203

12-20-2005, 07:14 PM	#8
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: How do I adjust the wiper arm? Like I said, I made one out of metal and it worked until I could buy a Snap-on tool. Mine looked like a 3/4" wide by 3/4" bent hook. I simply hooked on the bottom back of the wiper piece and applied pressure downward on top of the wiper arm to allow for the spring loaded piec to straigthen up on the splined wiper post. The metal has to be fairly heavy to stand up to the force needed.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.