What body bushings to use? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

orange72blazer · 01-11-2006, 04:15 PM

I'm going to be putting a 3" body lift on my Blazer and figured this would be a good time to replace the bushings. What kind of bushings are better the stock rubber type or the polyurthane bushings?

blazerparts · 01-11-2006, 07:02 PM

Some say poly's are stiffer and squeek, but they will probably outlast rubber. I used poly and greased them up good. Satisfied with them so far.

01-11-2006, 04:15 PM	#1
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	What body bushings to use? I'm going to be putting a 3" body lift on my Blazer and figured this would be a good time to replace the bushings. What kind of bushings are better the stock rubber type or the polyurthane bushings? __________________ 1972 Chevy Blazer 1997 GMC Sierra 2009 Chevy Tahoe

01-11-2006, 07:02 PM	#2
blazerparts No,I DON'T have Tourett's Join Date: Mar 2005 Location: Reno, NV Posts: 556	Re: What body bushings to use? Some say poly's are stiffer and squeek, but they will probably outlast rubber. I used poly and greased them up good. Satisfied with them so far. __________________ '72 K5 CST 350/350 Daily Driver '69 GMC3500 Camper Special CST Flatbed 396/400 Upgraded to show truck '69 GMC 2500 L6292, 3spd beater



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.